Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- No Surface Preparation Required
- Excellent Adhesion Properties
- Excellent Strength to Metals, E-Coat, Thermoplastics, Thermosets, and Engineering Plastics
- Excellent Impact Resistance
- Suitable for Easy Manual and Pneumatic Dispensing
- Excellent Thermal Performance
- 100% Reactive
- Room Temperature Cure
- 10:1 meter-mix product for ease of application
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Segment
- General Instructions
- The product is best used at temperatures between 65°F and 80°F. Temperatures below 65°F will slow the cure speed of the material and viscosities will be higher. Temperatures above 80°F will cause the material to cure faster and viscosities will be lower. For consistent dispensing maintain temperature in the above mentioned range.
- For optimum bond strength and to insure maximum performance in the finished assembly mate parts together within the specified work time of the adhesive. Make sure the bond joint has uniform coverage and that a sufficient amount of adhesive is in the bond area. It is important to have the adhesive applied, parts aligned and positioned, within the established work times for the product. To ensure maximum performance in the finished assembly
- Typical Applications
Metals
- Aluminum
- Steel
- Stainless
- E-Coated Metal
Thermosets
- Fiberglass
- Phenolic
- Gel Coat
- Epoxy
- RIM Urethane
- Polyurethane
- Liquid Molding Resin
Thermoplastics
- Acrylic
- ABS
- Polycarbonate
- Nylon/PA
- PPO
- Vinyl
- PVC
- Styrene
- Peek
- PBT Blends
- PET Blends
Properties
- Color (Properties)
- Physical Form
- Appearance
- Off white or amber viscous liquid
- Typical Properties
Value Units Test Method / Conditions Viscosity (at 25°C, 20 RPM, Resin) 130,000 - 180,000 cPs Brookfield RV7 Viscosity (at 25°C, 20 RPM, Activator) 40,000 - 80,000 cPs Brookfield RV7 Thixotropic Index (at 25°C, 20/2 RPM) 5 Brookfield RV7 Mixed Density 0.95 g/cc - Volume Mix Ratio 10:1 - - Weight Mix Ratio 10:1 - - - Cured Properties
Value Units Test Method / Conditions Gap Fill Dimension 0.25 inch - Hardness 45.0 ASTM D2240, Shore D Tensile Strength 22 - 32 MPa ASTM D638 Over Lap Shear Strength (Carbon steel, at 50% RH) 3000 psi ASTM D1002 Over Lap Shear Strength (Aluminum, at 50% RH) 2900 psi ASTM D1002 Thermal Service Range - 67 - 250 °F - - Uncured Properties
Value Units Test Method / Conditions Flash Point 51.0 °F - Open Time 4 - 6 min - Fixture Time 9 - 16 min Cure Temperature Room temperature - - Cure Time (at 25°C) 24 hr
Packaging & Availability
Storage & Handling
- Shelf Life
- 1 year
- Storage and Shelf Life Information
Product should be stored in a cool dry place out of direct sunlight. The shelf life of MP-55420 is one year from date of manufacture. Shelf life is based on the products being stored properly at temperatures between 55°F and 75°F. Exposure to temperatures above 75°F will reduce the shelf life. This product should never be frozen.