Products

UltraShield EMB 25 is a single-component, flexible, cold-applied, bitumen-modified acrylic-based waterproofing membrane. It is specially designed from a blend of special resin and rubber, reinforced with water-repelling fillers, mineral stabilizers, and a gelling agent. UltraShield EMB 25 is a highly elastic product that cures to a rubber-like membrane capable of withstanding severe expansion, contraction, and deck movements. It is highly resistant to oxidation, UV light, and ozone due to the unique additives used in its formulation, ensuring it does not crack.

Childers® VI-CRYL® CP-10 Weather Barrier Coating is a robust, fire-resistant, water-based mastic designed for various thermal insulation and insulating cement applications. With its high thixotropic property, it may appear dense but is simple to spread. This outdoor-rated coating is also UV-resistant, ensuring durability and protection against the elements.

MP-55320 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55320 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions.

Childers® Chil-Brate™ CP-25 is a water-based, fire-retardant, fibrated, asphalt-emulsion, weather barrier coating designed for applications over insulations on above-ground installations that operate under moderate to high-temperature conditions. This coating is "breathing," allowing vapors under pressure to pass through it. Once dry, the film becomes tough and durable, offering protection against atmospheric corrosives, chemical liquids, and fumes.

HydroArmor® 7763 is a sprayable latex coating designed for use on aluminum, fiberglass, cold-rolled steel, galvanized steel, and most metal primers. It is formulated with additives to improve adhesion to oily metals. It provides very good corrosion protection, even when applied as thinly as 10 mils wet. This low-viscosity, sag-resistant coating can be easily sprayed onto exposed underbody areas and into restricted areas such as tubing and "hidden" areas accessible only with spray wands. Wet film builds of up to 20 mils can be applied without runs, drips, or sags.

HydroArmor® 7770 is a water-based latex coating that provides lightweight and sound-dampening protection. It can be easily sprayed onto overhead and vertical surfaces to seal joints effectively. This coating is highly durable, even under the harshest service conditions. It is commonly used for lap sealing and sound deadening bonding to various materials such as cold-rolled steel, galvanized steel, stainless steel, primed steel, aluminum, fiberglass, and plywood. HydroArmor® 7770 belongs to the category of water-based coatings.

Foster® Air-Tight™ FDS-181 Duct Sealant is a fire-resistant, fibrate, water-based sealant designed for use on indoor or outdoor low, medium, and high-velocity heating and air conditioning ducts. It serves as a robust and flexible adhesive and sealant, creating a durable seal to prevent air leakage on the faced duct board, flex duct, galvanized aluminum, and stainless steel metal ducts.

Magik 3217 is a UL Classified, anti-fungal, low VOC, water-based, flexible fire-resistant vapor barrier sealant. It is designed for low, medium, and high-pressure/high-velocity metal, fiberglass, and flexible heating and air conditioning ducting systems. Magik 3217 is highly elastic and offers excellent adhesion to metal and aluminum. It functions as a tough and flexible adhesive and sealant, forming a durable seal against air leakage for both indoor and outdoor use.

Foster® Air-FAS™ Duct Sealant 32-18 is an economical, water-based sealant designed for use on low, medium, and high-velocity ducts. It is UL-181 B-M listed, ensuring its compliance with industry standards. This non-fibrate sealant forms a flexible and durable seal to prevent air leakage. It is provided in a special thixotropic consistency, making it easy to apply using various methods such as a brush, glove, trowel, or power extrusion.

Foster® C.I. Mastic® 60-26 is a resilient and durable asphalt cutback mastic with high solids content. It serves as an effective vapor retarder due to its low vapor permeance, making it an excellent surface coating for outdoor applications, particularly for low-temperature insulation.

H.B. Fuller Ködispace 4SG, initially developed for structural glazing façades, is now widely used in insulating glass for both residential and commercial applications. Its unique material properties create highly durable and energy-efficient insulating glass units (IGUs). Unlike conventional thermoplastic spacers, Ködispace 4SG’s chemically bonds to both the glass and silicone edge seal, ensuring long-lasting energy efficiency and durability.

Foster® Chil-Bridge™ CP-211 is a polymeric, water-based coating designed for the protection and isolation of asbestos-containing materials (ACM). It is suitable for use in both indoor and outdoor applications. When applied over various forms of ACM, it effectively bridges, encases, and seals friable asbestos fibers.

Childers® VI-CRYL® CP-11 Weather Barrier Coating is a sturdy, fire-resistant, water-based mastic formulated for various thermal insulation, finishing, and insulating cement applications. Despite its thick appearance, it spreads easily, thanks to its high thixotropic nature. This coating is suitable for outdoor use and offers UV resistance for lasting durability and protection.

EternaBond® AlumiBond™ is a high-quality adhesive tape known for its durability and excellent UV stability. It does not require a primer for application, making it convenient to use. EternaBond® AlumiBond™ falls under the category of pressure-sensitive adhesives, tapes, and labels, specifically tapes. It is commonly used in various applications such as roofs.