LA 4009- 18%

• Pre-wash surfaces with a damp cloth using MEK or Acetone.
• Allow to dry for 5 minutes minimum.
• Mix LA 4009EU with the appropriate amount of accelerator (ACC4009 or CAT UR) and mix until uniform. The catalyzed system has a pot life of eight hours.
• Apply 2-3 liberal coats of adhesive to the surfaces to be bonded, allowing 5-10 minutes drying time between coats.
• Fifteen minutes after application of the last coat, combine the surfaces with one of the following methods:
• With a damp cloth of MEK, swab both surfaces to be mated.
• Allow the excess solvent to “flash off” (approximately 15-30 seconds).
• Join the surfaces when aggressively tacky and apply pressure with a hand roller.
• The tack or open time will depend upon the thickness of the dry film and the quantity of solvent applied to the film for reactivation.

• Mixed Pot Life: 8 hours
• Working Life: 8 hours
• Reactivation Time: Up to 8 hours
• Cure Time: 5-7 days at room temperature or 1 hour at 212°F
• Note: Initial bond strength is high, and strong bonds are achieved overnight.
• Accelerator Mixing Ratio: 2.14 parts/100 by weight or 2 fluid ounces for one gallon of LA 4009-18.

Recommended Storage 45°F - 85°F. Keep out of direct sunlight. Mix well before use.