Products

Childers® Chil-Joint® CP-70 Sealant is a cost-effective joint sealant designed for use in various insulation systems, including low-temperature, dual-temperature, and some high-temperature applications. This sealant is non-shrinking and non-drying, ensuring long-lasting performance. It is also available in caulking tubes for application with hand or power caulking guns.

FA4844 is a single part Tie Cement specifically designed for use in the installation of protective low plasticized PVC sheet in holding tanks, chrome-plating baths, hydroelectric and other power generating facilities. Use in conjunction with our PC 4426 Primer for bonding low plasticized PVC liner to sandblasted metals, concrete, fiberglass and wooden tanks which are subject to standard operational temperatures ranging from - 20 deg. F. to 160 deg. F. Available in Neutral or Black, FA 4844 is characterized by an aggressive building tack throughout its 30-minute bonding range. It rapidly develops a high strength, resilient bond between the liner and pre-primed tank substrate. The combination primer / tie cement system typically yields a bond strength of 20 lbs. per linear inch between the liners and referenced tank substrates after 14 days and demonstrates excellent resistance to grease, oils, and water.

Swift®col 9668 is a solvent-borne acrylic self-curing pressure-sensitive adhesive known for its very high cohesion performance and high shear adhesion. It provides excellent resistance to heat and plasticizers with good color stability over time, making it suitable for use on both monomeric and polymeric PVC.

Adecol® C-2159 is formulated to enhance the performance of adhesives, particularly in high-stress environments. It is ideal for automotive, aerospace, and electronics industries, where superior bonding strength is critical. The product’s advanced formulation ensures that it maintains its bonding effectiveness under challenging conditions, offering a reliable solution for demanding industrial applications.

Tonsan® 1533 White is a two-component adhesive that can cure quickly at room temperature, providing excellent sealing and bonding. This material is recommended for potting electronic components, particularly junction boxes on PV modules. It has excellent dielectric properties and V1 flame retardancy.

Enifix 333 is a high-quality, one-component, multipurpose contact adhesive based on polychloroprene rubber with special tackifiers and additives. It is ideal for numerous repair and construction jobs requiring immediate bonding. Enifix 333 is specially developed to be compatible with most substrates and exhibits excellent film-forming properties, providing uniform bonding to many surfaces.

Adecol® C-528 adhesive is a polyvinyl acetate homopolymer aqueous dispersion, modified with special additives. This adhesive presents good initial grip, good fluidity along with mechanical resistance, providing good performance in automatic equipment. It is used in micro-corrugated coupling, side and bottom closure of envelope and untreated paper box and wood component bonding. Application by transfer roller, nozzle, disk or manual.

Foster® Sheer Defence™ Mold Resistant Clear Sealer (40-51) is a versatile product suitable for various surfaces. It provides a hard, mar-resistant finish that reduces dirt pickup and effectively seals water-damaged surfaces. This sealer exhibits excellent water resistance without developing haze once fully cured. It can be used over a variety of surfaces, including bare wood, painted surfaces, wallboards, masonry, brick, tile, grout, and metal.

Foster® Asbestos Removal Encapsulant 32-61™ is a water-based polymeric coating that offers an effective solution for dealing with various types of asbestos, including AMOSITE and CROCIDOLITE. This coating rapidly and thoroughly penetrates the asbestos-containing material (ACM), ensuring it becomes fully saturated. As it permeates the ACM, it adheres to individual fibers, locking them together and significantly reducing the likelihood of loose fibers becoming airborne during the removal process.

Foster® Eclipse™ Coating 40-11 is a low-odor, fast-setting, water-based surfacing material designed for field or shop application to faced or unfaced fiberglass duct liner or fiberglass duct board insulation. Its low viscosity enables application with a wide range of spray equipment available in the market.

Foster® Pumpable Cold Sealer 10-42 is a specialized sealant designed for metal air ducts. It offers unique characteristics such as non-skinning, high-solids composition, and non-setting properties, making it ideal for sealing seams and joints. One of its notable features is its ability to remain soft and flexible, even when subjected to thermal cycling across a wide temperature range. This flexibility ensures that the seal remains intact, preventing damage due to temperature variations.

H.B. Fuller 48173/58173 is an extra-fast setting, two-component, room temperature-curing epoxy adhesive. This system will cure at as low as -18°C (0°F). It has a convenient mix ratio, excellent cohesive strength, and bonds to most substrates, including concrete, ceramics, metals, carbon steel, stainless steel, aluminum, plastics, epoxy, stone, wood, glass, china, and leather. It is recommended for fast patching, fixturing, and other repairs requiring quick handling strength. Two slower-setting versions of this system are also available, which include 58185, which sets in approximately 10 minutes, and 58269, which sets in approximately 20 minutes. This extra-fast-setting epoxy is an excellent general-purpose adhesive. H.B. Fuller 48173/58173 is available in the unique DOUBLE/BUBBLE® job-sized package as Reorder No. 04001.

H.B. Fuller 35RC is a fast-curing, high-strength anaerobic adhesive. It is used for locking and sealing threads and for retaining cylindrical parts. It allows for larger machining tolerances and is highly resistant to heat, corrosion, vibrations, water, gasses, oils, hydrocarbons, and many chemicals.

Tonsan® 1533 Black is a two-component adhesive that can cure quickly at room temperature, providing excellent sealing and bonding. This material is recommended for potting electronic components, typically for the junction box on PV modules. It has excellent dielectric properties and V1 flame retardancy.

Swift®bond 2800 is a brown liquid, moisture-curing polyurethane adhesive specially formulated for the manufacturing of headliners. It is designed for use in producing headliners composed of rigid preformed substrates, such as semi-rigid PU foam, in combination with textiles and back-foamed textile materials.