Products

Matching Products Categories (2)

Adhesives & Sealants

Ready-to-Use Products

Adhesives & Sealants

Ready-to-Use Products

65 Products

SDSWith SDS

TDSWith TDS

H.B. Fuller UR4515GF

Chemical Family:Polyurethanes (PU)
Product Type:2K (2 component) Adhesive, Structural Adhesive, Reactive Adhesive
Compatible Substrates & Surfaces:Polyethylene (PE), Plastics, Polycarbonate (PC), Metal
Features:Thixotropic, High Performance, Fast Curing, Easy To Apply, High Lap Shear Strength, Chemical Resistant, Abrasion Resistant, Solventless, Impact Resistance, Room Temperature Curing, Electrically Non Conductive

H.B. Fuller UR4515GF is a two-component polyurethane adhesive specifically designed for the structural bonding of metals and plastics. This product offers high lap shear strength, good thixotropy for easy application, and a good work life. It has a 1:1 mix ratio by volume and is designed for easy use with automated dispense systems.

Hardman Epocap 45119-55119

Product Type:Reactive Adhesive, 2K (2 component) Adhesive, Epoxy Adhesive
Application Area:Electronic Components, Electric Vehicle (EV), Electric Motors
Features:General Purpose, Room Temperature Curing

Hardman Epocap 45119-55119 is a two-part epoxy adhesive with a room-temperature cure. It is designed for general-purpose low-voltage applications. This epoxy is specifically formulated for use in electronics and electric motors. It serves as a reliable adhesive for bonding electronic components and facilitates the assembly of electric motors.

Childers® Chil-Lastic™ CP-79 Sealant and Coating

Product Type:Sealant, Solventborne Adhesive, Coating
Application Area:Boiler
Application Method:Air Less Spray, Trowel
Compatible Substrates & Surfaces:Asphalt
Features:Exceptional Peel, Water Resistant, Acid Resistant, Crack Resistant, Good Toughness, High Temperature Performance, Excellent Substrate Adhesion, Vapor Barrier, Alkali Resistant, Room Temperature Curing, Good Adhesion

Childers® Chil-Lastic™ CP-79 Sealant and Coating is a versatile, high-temperature sealant and coating applied by trowel over various thermal insulations, except polystyrene. This asphalt-based coating creates a tough, durable, heavy film and can withstand elevated temperatures. Before putting hot lines, vessels, or tanks into operation, they should be cured at ambient temperature with proper ventilation to prevent the potential boiling out of the residual solvent.

H.B. Fuller EV Bond 440

Product Type:2K (2 component) Adhesive, Structural Adhesive
Application Area:Electric Vehicle (EV), Batteries
Compatible Substrates & Surfaces:Polyamide, Acrylonitrile Butadiene Styrene (ABS), Polybutylene Terephthalate (PBT), Vinyl, Fiberglass, Polycarbonate (PC), Poly(p-Phenylene Oxide) (PPO), Aluminum, Polyvinyl Chloride (PVC), Polyurethane, Polyether Ether Ketone (PEEK), Nylon, Polystyrene (PS), Plastics, Stainless Steel, Epoxies, E-Coated Surfaces, Coated Surfaces, Composites, Acrylic, Polyethylene Terephthalate (PET), Gelcoat, RIM Urethane, Phenolics, Metal
Chemical Family:Acrylics & Acrylates
Features:High Impact Resistance, High Temperature Resistance, High Durability, Room Temperature Curing, Good Adhesion, Good Bonding Strength, High Performance, Chemical Resistant, High Reliability, Good Weather Fastness

H.B. Fuller EV Bond 440 is a high performance two part acrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, with excellent impact and weathering properties. EV Bond 440 greatly increases the reliability of finished assemblies, it’s ability to with stand extreme temperature fluctuation, and resistance to a wide range of chemicals and environmental conditions.

H.B. Fuller MP5405

Chemical Family:Epoxy & Epoxy Derivatives
Product Type:Reactive Adhesive, Epoxy Adhesive, 2K (2 component) Adhesive, Structural Adhesive
Application Area:Electronics Potting
Compatible Substrates & Surfaces:Glass, Composites, Wood, Plastics, Metal, Ceramic
Features:Free Flowing, Good Toughness, Solvent Resistance, Excellent Salt Spray Resistance, Room Temperature Curing, Good Adhesion

H.B. Fuller MP5405 is a two-part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough, semi-rigid material with a free-flowing viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was especially formulated to have a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. Handling strength is normally achieved at room temperature within 3 - 5 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Weld Mount AT-2010

Product Type:2K (2 component) Adhesive, Reactive Adhesive
Compatible Substrates & Surfaces:Steel, Acrylonitrile Butadiene Styrene (ABS), Polybutylene Terephthalate (PBT), Vinyl, Fiberglass, Sheet Molding Compound (SMC), Polycarbonate (PC), Aluminum, Polyvinyl Chloride (PVC), Polyurethane, Polyphenylene Ether (PPE), Polyether Ether Ketone (PEEK), Nylon, Plastics, Stainless Steel, Epoxies, Composites, Acrylic, Polyethylene Terephthalate (PET), Gelcoat, RIM Urethane, Phenolics, Metal
Chemical Family:Methacrylates
Features:Good Weather Stability, Excellent Thermal Cycling Performance, High Impact Resistance, High Temperature Performance, Good Sagging Resistance, High Durability, Room Temperature Curing, Excellent Strength, Good Bonding Strength, High Viscosity, Easy To Apply, Fast Fixation

Weld Mount AT-2010 is a high-performance two-part methacrylate adhesive crafted to bond an array of plastics, metals, and composites. Unveil exceptional bond strength, enduring durability, and remarkable impact and weathering resistance. With a swift fixture time, it's a production favorite. AT-2010 elevates assembly reliability withstanding extreme temperature fluctuations, thermal cycling, and diverse chemicals.

Weld Mount AT-804030

Chemical Family:Methacrylates
Product Type:2K (2 component) Adhesive, Structural Adhesive
Compatible Substrates & Surfaces:Composites, Aluminum, Stainless Steel, Plastics, Metal, Plated Steel, Galvanized Steel
Features:Good Bonding Strength, High Viscosity, Chemical Resistant, Fast Fixation, Excellent Substrate Adhesion, Good Green Strength, Excellent Toughness, Good Sagging Resistance, Good Peeling Strength, Room Temperature Curing, Low Temperature Impact Resistance

Weld Mount AT-804030 is a versatile 2K adhesive for all your bonding needs. This amber-colored adhesive, categorized as a structural adhesive, offers exceptional performance on various substrates like metal, plastics, fiberglass, stainless steel, and more. Its room temperature curing, combined with features such as chemical resistance, substrate adhesion, and toughness, makes it a reliable choice for demanding applications.

H.B. Fuller EY2562

Chemical Family:Epoxy & Epoxy Derivatives
Product Type:Reactive Adhesive, Epoxy Adhesive, 2K (2 component) Adhesive, Structural Adhesive
Application Area:Aerospace Applications
Compatible Substrates & Surfaces:Composites, Plastics, Metal
Features:Chemical Resistant, Light Weight, Good Thermal Stability, Flame Retardant, Good Sagging Resistance, Room Temperature Curing, Self Extinguishing

H.B. Fuller EY2562 is designed to fill the need for a strong, pourable, and lightweight filler for honeycomb core panels. It can be used to pot fasteners or as an edge closeout after the panel is trimmed to contour. It is fire retardant, resistant to long exposure to 350°F, and cures at room temperature in thicknesses in excess of one inch.

H.B. Fuller MP5405FLEXMV

Chemical Family:Epoxy & Epoxy Derivatives
Product Type:Reactive Adhesive, Epoxy Adhesive, 2K (2 component) Adhesive, Structural Adhesive
Compatible Substrates & Surfaces:Glass, Composites, Wood, Plastics, Metal, Elastomers & Rubbers, Ceramic
Features:Medium Viscosity, Free Flowing, Good Toughness, Solvent Resistance, Excellent Salt Spray Resistance, Room Temperature Curing, Good Adhesion

H.B. Fuller MP5405FLEXMV is a two-part unfilled rubber modified medium viscosity epoxy adhesive designed for high-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid material that is free-flowing in viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 20 - 30 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

H.B. Fuller EV Bond 420

Product Type:2K (2 component) Adhesive, Structural Adhesive, Reactive Adhesive
Application Area:Electric Vehicle (EV), Batteries, Battery Packs
Compatible Substrates & Surfaces:Acrylonitrile Butadiene Styrene (ABS), Fiberglass, Polycarbonate (PC), Aluminum, Polyurethane, Plastics, Stainless Steel, Epoxies, Coated Surfaces, Composites, Acrylic, Gelcoat, RIM Urethane, Phenolics, Metal
Chemical Family:Acrylics & Acrylates
Features:Good Weather Stability, Excellent Performance, High Impact Resistance, Flame Retardant, High Durability, Room Temperature Curing, Good Adhesion, Low Odor, Good Bonding Strength, Chemical Resistant, High Reliability

H.B. Fuller EV Bond 420 is a high-performance, two-part acrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. EV Bond 420 greatly increases the reliability of finished assemblies, its ability to withstand extreme temperature fluctuations, and its resistance to a wide range of chemicals and environmental conditions. EV Bond 420GB allows control of the adhesive gap to a diameter of 0.25mm (0.01").

H.B. Fuller EV Bond 300

Product Type:2K (2 component) Adhesive, Structural Adhesive
Application Area:Electric Vehicle (EV), Batteries, Battery Management System (BMS), Battery Casing
Compatible Substrates & Surfaces:Metal, Plastics, Composites
Chemical Family:Polyurethanes (PU)
Features:Room Temperature Curing, CTE Absorption, Thixotropic, Shock Absorbent, High Elongation, High Flexibility, Good Impact Strength, High Impact Resistance, Low Temperature Performance, Vibration Damping, Good Shrinkage Resistance

H.B. Fuller EV Bond 300 is a structural adhesive, designed for electrical and electronics applications, specifically for parts and components in batteries and electric vehicles (EVs).

WS-8072 Class B

Product Type:2K (2 component) Sealant
Application Area:Fuel Tank, Aerospace Applications
Compatible Substrates & Surfaces:Coated Surfaces, Composites, Aluminum Alloys, Aluminum, Metal
Application Method:Extrusion, Spatula
Chemical Family:Polysulfides
Features:Thixotropic, Fast Curing, Fungus Resistant, Corrosion Resistant, High Temperature Resistance, Light Weight, Oil Resistant, Non-Sagging, Excellent Fuel Resistance, Room Temperature Curing, Low Density, Good Adhesion, Excellent Productivity

WS-8072 Class B is a non-chromate corrosion inhibitive, light weight, fast curing polysulfide sealant. Two-part manganese cured polysulfide system with eco-friendly profile provides an effective barrier against the common causes of corrosion on aluminum and between dissimilar metals. AC-8072 B retains excellent performance characteristics at temperature excursions up to 360°F. Typical applications include sealing of fay surfaces of mating parts of aircraft structure to prevent corrosion and channeling leakage. WS-8072 Class B has outstanding retention of physical properties when exposed to aviation fuel and oils. It is a thixotropic paste with non-sag characteristics an able to be applied by an extrusion gun or with a spatula.

H.B. Fuller EV Therm 601

Product Type:Radiation Curable Coating, Conductive Coating, 1K (1 component) Coating
Features:Room Temperature Curing, Low Viscosity, Electrically Insulating, LED-curable, Low Surface Tension, UV Curable, Thermally Conductive, Fast Cure, Rapid Cycle Time, Flame Retardant, High Dielectric Strength, Good Adhesion
Application Area:Electric Vehicle (EV), Electronic Components, Batteries
Compatible Substrates & Surfaces:Metal, Plastics
Chemical Family:Acrylics & Acrylates

H.B. Fuller EV Therm 601 is a one-component UV curable technology that is thermally conductive, flame retardant, and electrically insulative. This material provides an optimum coating with a minimum coating thickness of 150 microns and encapsulation protection for electronic assemblies and components. This material was designed to be thermally conductive and is recommended for use with heatsinks, heat spreaders, cold plates, cooling tubes, and other thermal dissipation applications.

Tonsan® 1262

Product Type:Anaerobic Adhesive, Solvent free (100% Solids) Adhesive, Thread Locker, 1K (1 component) Adhesive
Features:Thixotropic, High Strength, Good Gap Filling Capabilities, Room Temperature Curing

Tonsan® 1262 is an anaerobic adhesive with a versatile range of applications. It falls into the category of ready-to-use products and serves as a thread locker, solvent-free (100% solids) adhesive, 1K (1 component) adhesive, and anaerobic adhesive. Key features include thixotropic properties, high strength, good gap-filling capabilities, and room temperature curing. This adhesive is primarily utilized in the industrial sector, specifically for applications related to equipment and parts.

H.B. Fuller EY2536

Chemical Family:Epoxy & Epoxy Derivatives
Product Type:Reactive Adhesive, Epoxy Adhesive, 2K (2 component) Adhesive, Structural Adhesive
Application Area:Aerospace Applications, Aerospace Leading Edge
Compatible Substrates & Surfaces:Composites, Plastics, Metal
Features:Chemical Resistant, Light Weight, Good Thermal Stability, Good Sagging Resistance, Room Temperature Curing, Self Extinguishing

H.B. Fuller EY2536 is a very lightweight, easily spread epoxy compound for edge filling sandwich panels used in aircraft interiors. It wipes in cleanly and can be sanded smooth after an overnight cure at room temperature. H.B. Fuller EY2536 is self-extinguishing when tested per FAR 25.853, Appendix F.

Show

of 65 results