Products

H.B. Fuller MP54110 is a two-part unfilled epoxy adhesive designed for bonding of metals, ceramics, and most plastics. This product gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. This product has better water and temperature resistance than standard 5-minute epoxy. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 30 - 60 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

H.B. Fuller EV Protect 300 is a two-component, low viscosity polyurethane encapsulating system that is designed for potting and encapsulating of battery cells in battery modules. This product offers battery designers the ability to enhance safety and protection from thermal propagation.

Millennium Hurricane Force® Universal Sealer Extreme is a fast-setting, solvent-free, multi-use universal sealer that becomes waterproof within minutes of application. The formula is essentially VOC-free, making it approved for use in regulated markets such as California and OTC states. Millennium Hurricane Force® Universal Sealer Extreme is a two-component product that cures via a chemical cross-linking mechanism. Unlike one-part moisture-cure sealants, Universal Sealer Extreme will cure consistently and quickly throughout, rather than simply skinning over and remaining tacky on the inside.

Swift®therm Advantage 8800 is a metallocene-based hot melt spine adhesive that has been formulated as a specialty grade for use in spine gluing applications. This adhesive boasts excellent pot stability with an extremely low odor, making it an ideal choice for manufacturing processes where odor can be an issue.

H.B. Fuller EY3010 is a two-part, thixotropic epoxy compound. It is designed for use with Shur-Lok fasteners to achieve high strength and dependable bonded inserts in honeycomb panels. The handling properties of these products are similar. However, the H.B. Fuller EY3010 is designed for the lowest weight. It is available within NASA limits because it has the low volatile content required for space applications. H.B. Fuller EY3010 A/B is qualified for LAC 30-8036A.

MP-58420 is a two-part methacrylated acrylic hybrid adhesive designed for non-flammable, low-odor applications. It bonds plastics, metals, and composites, providing strong durability, impact resistance, flexibility, and weathering properties across temperature fluctuations and chemical exposure.

MP-55305 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55305 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions. It offers exceptional bonding for a wide range of substrates.

MP-55300 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55300 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions. It offers exceptional bonding for a wide range of substrates.

Hydra FAST-EN® DC-13239 is a water-borne, two-part sprayable adhesive designed to bond various substrates found in the marine industry. These include open cell urethane foams, foam-backed headliners, marine carpet, fiberglass (bare and gel-coated), treated wood, aluminum, and various fabrics and plastics. The system is user-friendly and addresses many of the common problems encountered with other two-part systems. Other applications where the use of solvent based, flammable and non-flammable systems is a concern for either health or environmental reasons may also be suitable candidates for the use of this product.

H.B. Fuller 2061US is a fire retardant 2K polyurethane adhesive suitable for electric vehicles and primary insulating glass sealant applications on glass surfaces. It belongs to the polyurethane (PU) chemical family and is a reactive adhesive. It features high fire retardancy, and its product type is 2K liquid reactive adhesive and reactive sealant within adhesives and sealants technologies. It is compatible with glass surfaces.

Swift®col 9266 is a solvent-borne pressure-sensitive adhesive based on natural rubber and tackifier resins. It boasts high cohesion and adhesion properties, excellent green tack, and very good adhesion to plastic materials. The adhesive forms a transparent and clear dry film.

Tonsan® AT 2641 is a 2K PU structural adhesive designed for composite materials bonding. It cures at room temperature or can be accelerated with heating, resulting in excellent adhesion, impact resistance, water resistance, electrical isolation, and corrosion resistance upon curing.

H.B. Fuller 46580/56580 is a thixotropic, extra-fast-setting, two-component epoxy adhesive. It has a convenient mix ratio, excellent sag resistance when applied to vertical surfaces, and a smooth paste consistency. It is recommended for rapid repairs and electrical and industrial staking. H.B. Fuller 46580/56580 extra-fast setting epoxy is an excellent general-purpose adhesive. It is recommended for substrates such as metals, carbon steel, stainless steel, aluminum, plastics, epoxy, stone, wood, glass, china, and leather. H.B. Fuller 46580/56580 is available in the unique DOUBLE-BUBBLE® job-sized package as Reorder No. 04008.

H.B. Fuller UR4515GF is a two-component polyurethane adhesive specifically designed for the structural bonding of metals and plastics. This product offers high lap shear strength, good thixotropy for easy application, and a good work life. It has a 1:1 mix ratio by volume and is designed for easy use with automated dispense systems.