Products

Cyberbond CB 2011 is a cyanoacrylate with extremely good properties for bonding rubber (especially EPDM) and plastics with each other or in combination. The aging properties of these joints are outstanding. The medium viscosity of CB 2011 is considered favorable for manual applications.

FulaFlex™ 650FC is a high-performance, 1-part hybrid moisture-curing sealant and adhesive that forms a tough, elastic, and weatherproof seal. It’s a mid-high modulus product suitable for trafficable areas like concrete saw cuts in commercial buildings and various bonding applications.

Cyberbond CB 2004 is a carefully stabilized, fast-bonding cyanoacrylate for hobby and DIY applications. This one-component, solvent-free adhesive is based on esters of cyanoacetic acid. CB 2004 performs well in combination with mineral fillers. It has medium viscosity and universal properties.

KALENE® 800 is a low-molecular-weight liquid polymer derived by the depolymerization of butyl rubber. It vulcanizes at either ambient or elevated temperatures with the standard curatives for butyl rubber. KALENE® 800 is light gray and contains no solvents or additives. KALENE® 800 has the lower viscosity of the two KALENE® grades available and is the preferred liquid butyl rubber for coating applications. KALENE® 800 provides gas impermeability, chemical resistance, moisture resistance, good electrical properties, and excellent vibration/sound damping qualities.

GSSI® MH-200 Sealant Tape is a high-quality extruded sealant for mobile homes, RVs, and modular homes waterproofing. This tape offers superior performance compared to conventional putty tapes commonly used for windows, doors, vents, etc. The blend of binders and tackifying resins provides a long service life even under severe atmospheric conditions. No winter/summer formulation changes are required for this premium sealant.

H.B. Fuller UR2179 is a two-part, flame-retardant polyurethane adhesive system designed to withstand sustained loads. It is ideal for bonding metals, as well as plastics, including composites, acrylics, and polycarbonate.

Tuskbond Infusion 701 - 500ml Aerosol Infusion Adhesive is a specially developed spray adhesive designed to hold reinforcing fibres in place during the infusion process of Resin Transfer Moulding. Tuskbond Infusion 701 - 22L Canister RTM Infusion Adhesive is a specially developed spray adhesive designed to hold reinforcing fibres in place during the infusion process of Resin Transfer Moulding. The super-fast drying time ensures that layers can be built up with minimal time waiting for the adhesive to dry. Tuskbond Infusion 701s unique pebble spray technology covers areas fast and provides a flat bonding surface in seconds.

H.B. Fuller UR4515G is a two-component polyurethane adhesive specifically designed for the structural bonding of metals and plastics. This adhesive offers high lap shear strength, good thixotropy for easy application, and a good work life. It has a 1:1 mix ratio by volume, which is intended for easy use with automated dispensing systems.

H.B. Fuller BCF-1 is a butyl tape that is pressure-sensitive and has butyl-coated foam. It adheres aggressively to most substrates and easily conforms to irregular contours. It offers excellent weatherability and has a highly compressible PVC foam core encapsulated with high-tack butyl adhesive and sealant. It is commonly used as a sealant against moisture and dust elements for various applications, including bus and truck bodies, windows, and as a compliant sealant to protect against water penetration and prevent corrosion and moisture damage in sealant tapes and patches.

H.B. Fuller EY3010 is a two-part, thixotropic epoxy compound. It is designed for use with Shur-Lok fasteners to achieve high strength and dependable bonded inserts in honeycomb panels. The handling properties of these products are similar. However, the H.B. Fuller EY3010 is designed for the lowest weight. It is available within NASA limits because it has the low volatile content required for space applications. H.B. Fuller EY3010 A/B is qualified for LAC 30-8036A.

H.B. Fuller MP5405 is a two-part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough, semi-rigid material with a free-flowing viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was especially formulated to have a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. Handling strength is normally achieved at room temperature within 3 - 5 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

H.B. Fuller MP5405FLEXMV is a two-part unfilled rubber modified medium viscosity epoxy adhesive designed for high-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid material that is free-flowing in viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 20 - 30 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Cyberbond CB 1699 is a fast-bonding, high-viscosity cyanoacrylate. It is not really made to bond metal to metal, but when it comes to combinations with rubber or plastic, this product can be very suitable. Due to its high viscosity, CB 1699 can fill smaller gaps.

WS-8020RC Class B is a rapid cure two component polysulfide sealant. The cured sealant has excellent fuel resistance as well as outstanding sealing characteristics at temperatures ranging from -65°F (54°C) to 250°F (121°C), including intermittent exposure up to 360°F (182°C). It exhibits excellent elastomeric properties and retention after prolonged exposure to jet fuel and aviation gasoline. The uncured product is a low sag, thixotropic paste suitable for application by extrusion gun or spatula. It cures at room temperature forming a resilient rubber, exhibiting outstanding sealing.

 

Cyberbond 2999 is a single-component, high-viscosity gel cyanoacrylate adhesive. It is ideal for bonding porous materials or for applications where controlling adhesive flow is critical. Cyberbond 2999 offers maximum gap filling and repositioning time. It has been certified to ISO 10993-5 for cytotoxicity, making it appropriate for use in medical device applications.