Products

Millennium Hurricane Force® 1-Part Membrane Adhesive is a highly elastomeric, one-part asphalt-modified urethane adhesive that is solvent-free and does not require mixing. The VOC content of the adhesive is less than 250 g/L. Millennium Hurricane Force® 1-Part Flashing Adhesive is approved for use in VOC regulated markets such as California and the OTC States.

UltraShield AC 11 is a high-quality, single-component, flexible, acrylic-based waterproofing and protective coating. It is designed to provide a tough barrier against weathering agents and UV, and it also functions as an anti-carbonation coating. Upon full cure, the coating forms a tough, resilient, yet flexible barrier.

UltraShield EMB 25 is a single-component, flexible, cold-applied, bitumen-modified acrylic-based waterproofing membrane. It is specially designed from a blend of special resin and rubber, reinforced with water-repelling fillers, mineral stabilizers, and a gelling agent. UltraShield EMB 25 is a highly elastic product that cures to a rubber-like membrane capable of withstanding severe expansion, contraction, and deck movements. It is highly resistant to oxidation, UV light, and ozone due to the unique additives used in its formulation, ensuring it does not crack.

Rapidex® NP 2075 is a polyurethane-based reactive hot melt adhesive. It is commonly used for bonding a wide range of materials, including leather, wood, metal, glass, textiles, PUR foams, and various membrane films and plastics such as PVC, ABS, and PC. This adhesive is notable for its high initial strength, excellent thermal stability, and good flexibility after complete curing.

H.B. Fuller EV Bond 383 is a thixotropic, toughened, two-component, ambient-curing epoxy adhesive. High impact resistance, moderate cure speeds, and good peel resistance characteristics make this system suitable for assembly or sealing of reinforced composite structures, metal bonding, or other applications where a toughened epoxy adhesive is required. This system contains dyes that fluoresce brightly with exposure to UV inspection lamps (black light).

H.B. Fuller EV Therm 601 is a one-component UV curable technology that is thermally conductive, flame retardant, and electrically insulative. This material provides an optimum coating with a minimum coating thickness of 150 microns and encapsulation protection for electronic assemblies and components. This material was designed to be thermally conductive and is recommended for use with heatsinks, heat spreaders, cold plates, cooling tubes, and other thermal dissipation applications.

H.B. Fuller EV Bond 720 is designed to set quickly and strengthen within 3-4 minutes. Fully moisture-cured material displays excellent high temperature strength, tested up to 120°C. Rapid shipment of bonded parts is possible, as H.B. Fuller EV Bond 720 will not flow or expulse at 120°C, preserving bonded geometry at high temperatures before fully moisture-cured. This patented reactive hot melt moisture curing material is a one component polyurethane, 100% solid adhesive. Excellent adhesion strength is achieved within 10 seconds to 3 minutes after dispensing. This product has aggressive hot tack and cures in the presence of moisture into a tough bond. It works well in bonding various plastics, woods, metals, and primed glass substrates.

ISOLENE® 400-S is a low-molecular-weight liquid polymer derived from synthetic polyisoprene rubber. It offers the performance and processing characteristics of natural rubber with the added benefit of a lighter color and none of the natural impurities inherent in natural rubber products. ISOLENE® 400-S is a high-viscosity liquid at room temperature. It is a translucent, honey-colored liquid in bulk form and virtually clear in a thin film.

H.B. Fuller EV Therm 440 GB is a modified, highly engineered structural acrylic adhesive designed to provide excellent thermal conductivity while maintaining superior strength and performance properties across a wide range of temperatures and substrates. EV Therm 440 is an excellent flame retardant with a UL94 V0 rating. It allows control of the adhesive gap to a diameter of 0.25mm (0.01").

FLX 575 carpet adhesive is a high quality, high strength, water-based dispersion adhesive that is compatible with most of the substrates. This product is based on a very special type of synthetic resin, with very high-performance additives, fine grade mineral fillers and tackifier.

H.B. Fuller 12137 is a high-performance sprayable contact adhesive known for its exceptional initial tack, strength, and temperature resistance. It offers excellent resistance to water and moisture. With high solid content and a low soak-in web pattern, it provides extended coverage. This adhesive is widely used for bonding various materials such as metals, plastics, wood, laminates, rubber, fiberglass-reinforced plastic (FRP), gel coat, polyethylene, polypropylene, styrene butadiene rubber (SBR), and foam.

H.B. Fuller EV Seal 500 is a thermal plastic hot melt PSA designed for use in gasketing and sealing applications. It is especially suitable for sealing battery pack modules where accessibility and serviceability are a high priority. With the resealable nature of this material, repeated opening and closing of a battery enclosure is simple, easy, and reliable. The EV Seal 500 offers a robust solution for preventing dust and moisture intrusion into any enclosure. This material is recommended for use with steel, aluminum, and cast iron.

H.B. Fuller HMC-7RC is a hot-applied butyl rubber-based adhesive and sealant that bonds to various substrates and creates a permanent seal against moisture, dust, and air intrusion. It is extremely resistant to both interior and exterior environmental conditions and has excellent adhesion to glass, EPDM, and PVC.

H.B. Fuller EV Therm 288 is a silicone-free gap filler, formulated exclusively for EV battery environments. This thermal interface material cures at room temperature or is accelerated with heat and provides excellent thermal conductivity, electrical insulation, water resistance, corrosion resistance, and impact resistance properties.

Rakoll® 4020 is a non-labeling, reactive hot melt adhesive designed for edgebanding applications. It has a low monomer content (<0.1%) and is developed to meet the demand for high-performance adhesives. Rakoll 4020 has good initial strength and is suitable for bonding various edge materials.