Products

Hydra FAST-EN® DC-20852 is a specific type of water-based adhesive that is designed for bonding open-cell urethane foams. It is important to note that DC-20852 is only one component of a two-component adhesive system, and it requires the use of an activator known as DC-12239 (Part B).

Cyberbond CB 2077 is a cyanoacrylate with extremely good properties for bonding rubber (especially EPDM) and plastics with each other or in combination. The aging properties of these joints are outstanding. The high viscosity allows certain gap-filling properties. CB 2077 is a real general purpose product in this viscosity range. It is fast-bonding and has a high viscosity along with good aging properties.

MP-55300 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55300 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions. It offers exceptional bonding for a wide range of substrates.

Cyberbond CB 2600 is a surface-insensitive cyanoacrylate. This product performs very well on most materials, including acidic surfaces such as wood, leather, cardboard, paper, etc. CB 2600 is a very low-viscosity product with very fast bonding and wicking properties. Cyanoacrylates are fast setting, one component and solvent-free adhesives. They are based on esters of cyanoacetic acid.

Cyberbond CB 1699 is a fast-bonding, high-viscosity cyanoacrylate. It is not really made to bond metal to metal, but when it comes to combinations with rubber or plastic, this product can be very suitable. Due to its high viscosity, CB 1699 can fill smaller gaps.

Cyberbond CB 5500 is a cyanoacrylate with low odor, low blooming (whitening effect), and low outgassing characteristics. These very positive properties unfortunately go along with lower strength features compared to the ethyl ester-based cyanoacrylates. CB 5500 is a very low-viscosity grade with wicking properties.

Cyberbond CB RH 72 is a high-strength, high-viscosity anaerobic adhesive that is designed for permanent locking and sealing of threaded fasteners, particularly suitable for stainless steel. It cures in the absence of air, providing a secure and permanent locking solution. The adhesive is also RoHS compliant.

Cyberbond CB AT 1740 PP-PE Bonder is a two-component methacrylate adhesive specifically designed for bonding polyethylene and polypropylene substrates without any pretreatment. It has a short open time, thixotropic consistency, and a mixing ratio of 10:1, making it easy to apply and providing excellent bonding performance.

Cyberbond CB SH 27 is a medium-strength, high-viscosity anaerobic adhesive designed for use as a pipe and flange sealant, as well as an instant gasket. It can be easily dismantled if needed. Anaerobics are excellent sealants for threads and flanges. Anaerobics are solvent-free, one component adhesives.

DURABOND PA 1047LF is a waterbased adhesive, designed for high performance on core winding. It has fast setting time, good machinability and bonding performance. It is used for paper core.

ZKLT PK-6400S is a solvent-based polyurethane adhesive, forms strong adhesion through moisture reaction with the air. This adhesive is primarily used in the wet process of headliner assembly, bonding PU parts and fabrics, as well as materials like hemp felt board, non-woven fabric, felt, and foam. Notably, it's environmentally friendly, a 2K moisture-curing adhesive with a long pot life and low molding temperature.

Cyberbond CB 1070 is very suitable for metal-to-rubber or plastic combinations. It is not recommended for bonding metal to metal. Due to its viscosity, CB 1070 should be considered the most favorable grade in this series. It is a general-purpose cyanoacrylate that is fast-bonding and has low viscosity.

Cyberbond CB 2028 is a cyanoacrylate with extremely good properties for bonding rubber (especially EPDM) and plastics with each other or in combination. The medium viscosity of CB 2028 is considered favorable for manual applications. It is fast-bonding and has medium viscosity along with good aging properties.

ZKLT PK-622D is a liquid moisture-curing polyurethane adhesive, is your top choice for wet process headliner assembly. Designed for bonding PU parts and fabrics, it's also versatile enough to bond hemp felt board, non-woven fabric, felt, foam, and more. This adhesive stands out with its user-friendly spray application, high green and final strength, and exceptional high-temperature resistance.

Cyberbond CB SH 58 is an anaerobic curing sealant that is designed for use in flange and instant gasket applications. It has a medium strength and very high viscosity formulation, which makes it ideal for use in situations where gap filling properties are required. It is a thixotropic natured adhesive.