Products

EternaBond® TP 13245 is a film-forming thermoplastic polyurethane adhesive. It is specifically designed for bonding low-surface-energy plastics and materials with heat sensitivity. The adhesive offers easy handling and excellent wetting capabilities. EternaBond® TP 13245 finds uses in various applications, such as low-denier wovens and smooth-surface plastics, including nylon, PVC, polycarbonate, ABS, polyurethane, and fiberglass.

H.B. Fuller U3349TX is a non-sag, UV-curable adhesive with a tack-free surface finish. It exhibits excellent bonding to a variety of plastics with a balance of strength, flexibility, and impact resistance. This adhesive is specifically designed for bonding a variety of plastics.

H.B. Fuller GP Mist Adhesive is a solvent-based adhesive. The adhesive provides high initial tack, allowing for quick adhesion, and has a long bonding time for aerosol spray applications. It creates strong and reliable bonds between surfaces. The fine mist pattern of the adhesive ensures extended coverage, enabling efficient and uniform application. H.B. Fuller GP Mist Adhesive is suitable for bonding a wide range of surfaces, including metals, plastics, FRP (Fiber Reinforced Plastic), SMC (Sheet Molding Compound), wood, insulation, fabric, foils, thin films, displays, liners, gaskets, foam, cardboard, and paper. It offers both permanent and temporary bonding capabilities, depending on the specific requirements of the application. This adhesive is commonly used in aerosol can packaging applications, where it provides strong and durable bonds. The high initial tack allows for immediate adhesion, while the long bonding time allows for proper positioning and alignment before the bond fully sets.

Isapur™ 2072 / Köracur TH 650 are liquid-reactive 2-component polyurethane adhesives. It is a low-viscosity, fast-curing system specifically designed for potting metal and plastic frames. This adhesive is commonly used in applications such as frame potting for air filtration purposes.

Swift®lock 2003 is a one-part hot melt adhesive that cures through a chemical reaction with moisture in the air and substrates. It is suitable for automotive interior trim applications and bonding a variety of wood-based substrates, such as soft woods, hard woods, particle board, MDF, papers, and wood veneers.

Körapop 240-2K is a two-component elastic adhesive and sealant based on silane-modified polymer chemistry. It is a boosted, high-strength, and non-sag product that offers both high strength and flexibility. The adhesive also provides high adhesion without the need for primers on many substrates. Additionally, it boasts outstanding resistance to UV, weather, and aging.

ElastiSeal® B-100 Butyl Rubber Sealant is a single component, solvent release butyl based sealant specifically designed to provide excellent exterior weathering properties. It is easy to apply and tool and exhibits superior adhesion to a variety of clean surfaces. ElastiSeal® B-100 Butyl Rubber Sealant is an excellent choice for exterior sealing applications and is compat- ible with an array of substrates such as glass, metals, concrete, wood, masonry and some plastics.

H.B. Fuller U304 is a medium-viscosity UV-cured adhesive that serves as a high-impact, strong plastic bonder. Its applications include catheter assembly, IV sets, tube bonding, airway masks, mechanical device assembly, and balloon bonding, specifically in the field of medical device assembly.

Körapur® 940 Marine is a one-component, moisture-curing adhesive and sealant that is elastic and suitable for use in the marine and boat industry. The product exhibits good adhesion to primed and painted metals, aluminum, wood, duroplastics, GRP, and gel coat. It also offers good resistance to humidity and weathering.

Childers® Encacel® V CP-45 Vapor Retarder Coating is an elastomeric, polymer-based coating designed to function as a vapor retarder and weatherproofing agent. It is primarily used to protect sprayed, board, and block-type insulation. This coating boasts exceptional adhesive properties, excellent flexibility, and superior vapor retarder characteristics.

Cilbond® 48 is a clear, single-component bonding agent designed for both cold and hot-cure applications (65-275°F/20-135°C) with castable polyurethane systems and injection-molded thermoplastic polyurethane (TPU) systems on metal and plastic substrates. It provides exceptional corrosion resistance and offers the advantage of fast drying. Cilbond® 48 can be used without the need for a pre-bake process and has been specifically developed for use in dynamic conditions where hydrolytic stability is crucial.

H.B. Fuller 12243 is a water-based adhesive known for its one-component, acrylic formulation. It is a pressure-sensitive adhesive that offers good resistance to oils, solvents, and water. The adhesive exhibits excellent high temperature resistance and peel strength. It is also highly resistant to plasticizer migration and creep. H.B. Fuller 12243 is widely used for bonding a diverse range of materials.

H.B. Fuller TS880 is a two-part adhesive (10:1 ratio by volume), which can bond many low-surface-energy plastics without special surface preparation, including many grades of polypropylene, polyethylene, TPO, etc. TS880 can replace screws, rivets, plastic welding, and two-step processes that include chemical etchants, priming, or surface treatments in many applications. Typical applications include bonding plastics, metals, glass, and rubbers.

Foster® Fos-Stik™ Adhesive 85-45 is a fast-tacking aerosol spray adhesive with low soak-in properties. It is employed for bonding various insulation materials to metal or other construction surfaces, offering quick adhesion and strong initial adhesive strength. This adhesive can be applied as either a one-way wet adhesive or a two-way contact cement.

H.B. Fuller HSC13 is a solvent-based adhesive. Notable features include fast tacking, high strength, and high-temperature resistance, making it suitable for spray adhesive applications. The adhesive also exhibits excellent water and moisture resistance, ensuring durability even in challenging environments. It has a high solids content and a low soak-in web pattern, providing extended coverage for efficient usage. H.B. Fuller HSC13 is commonly used in woodworking, furniture, cabinets, marine, RV, upholstery, and carpet applications. It is designed for bonding metals, plastics, wood, laminates, rubber, insulation, glass, fabric, thin films, foils, and urethane foam. The versatile nature of H.B. Fuller HSC13 makes it suitable for cylinder packaging applications, ensuring reliable and durable bonds. The adhesive is non-staining and complies with low VOC (volatile organic compounds) and HAP (hazardous air pollutants) regulations, making it environmentally friendly and LEED (Leadership in Energy and Environmental Design) compliant.