Products

Cyberbond CB 2610 is a surface-insensitive cyanoacrylate. This product performs very well on most materials, including acidic surfaces such as wood, leather, cardboard, paper, etc. Due to its viscosity, CB 2610 should be considered the general-purpose grade of this range. CB 2610 is also known as CB 2611, in different countries; both products are identical. With its medium viscosity and surface-insensitive nature, it demonstrates extremely fast bonding capabilities.

Cyberbond CB 1008 is a cyanoacrylate that is not really made to bond metal to metal, but when it comes to combinations with rubber or plastic, this can be very suitable. Due to its low viscosity, CB 1008 has wicking properties. It is fast-bonding and has low viscosity.

H.B. Fuller Kodiguard is used to provide security, soundproofing, and media functionality for various applications. The product utilizes multi-component catalytic or single-part ultraviolet curing platforms to achieve its desired properties. One of the key features and benefits of H.B. Fuller Kodiguard is its ability to enhance security and provide soundproofing capabilities. Additionally, H.B. Fuller Kodiguard offers media functionality, which can include features like privacy films, solar control, or other specialized coatings that enhance the performance of laminated glass in specific applications. It is commonly used in the manufacturing of windows where security, soundproofing, and media functionality are desired.

H.B. Fuller EV Therm 440 GB is a modified, highly engineered structural acrylic adhesive designed to provide excellent thermal conductivity while maintaining superior strength and performance properties across a wide range of temperatures and substrates. EV Therm 440 is an excellent flame retardant with a UL94 V0 rating. It allows control of the adhesive gap to a diameter of 0.25mm (0.01").

H.B. Fuller MP54190 is a two-part mineral-filled epoxy adhesive for bonding metals and plastics. It cures at room temperature to a semi-flexible material with good wetting properties for self-leveling and air release. It provides excellent vibration and impact resistance and good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. With a 1:1 volume mix ratio, it's suitable for use with dispensing cartridges and metering, mixing, and dispensing equipment. At room temperature, the adhesive reaches a handle cure within 16–24 hours, but heat can accelerate curing, with typical times and temperatures ranging from 2 hours at 65°C to 20 minutes at 100°C. Work and cure times will increase at cooler temperatures.

H.B. Fuller PUS 555-S is a reactive hot-melt adhesive with good initial tack and excellent weather resistance. It is suitable for a wide range of substrates including steel, aluminum, and PVC film. This adhesive is commonly used in window frames and fenestration applications.

H.B. Fuller 20760 is a one-component, water-based VAE adhesive with excellent water and plasticizer resistance. It can be applied by spray, brush, or roll and is ideal for bonding rigid PVC, flexible PVC, plywood, and wood, making it suitable for flooring applications.

Millennium One Step™ Night Seal® is a highly elastomeric, solvent-free, quick-setting foam sealer. The unique formulation results in a foam that has a weatherproof "skin". Millennium One Step™ Night Seal® sets in minutes and is designed for use with our One Step™ application process. It is efficient and always dependable. The application process is quick and easy, resulting in significant labor savings for the contractor. No expensive specialty pumps or spray rigs are required.

H.B. Fuller HP008 is a single-component hot melt adhesive. This product cross-links through a chemical reaction with moisture found in the atmosphere and substrates to form a set adhesive. H.B. Fuller HP008 is a high-performance, high-green strength grade reactive hot melt with superior adhesion to a variety of substrates. It can be applied using roll coaters as well as hot melt adhesive guns. It is particularly suited for bonding EPS, PU foam, aluminum, steel, various plastics (PVC, ABS, and SMC), and rubber.

Millennium Hurricane Force® 1-Part Membrane Adhesive is a highly elastomeric, one-part asphalt-modified urethane adhesive that is solvent-free and does not require mixing. The VOC content of the adhesive is less than 250 g/L. Millennium Hurricane Force® 1-Part Flashing Adhesive is approved for use in VOC regulated markets such as California and the OTC States.

H.B. Fuller MP5430NS is a two-part modified epoxy adhesive designed for medium-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid polymer and is delivered in a non-sagging viscosity. It provides good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 40 - 50 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Rapidex® NP 2075 T is a hot melt adhesive that enables strong assemblies. It is widely used in automotive interior applications, specifically for attachments. This ready-to-use product falls under the category of hot melt adhesives, offering efficient bonding solutions. Its inclusion in the bonding technology of hot-melt reactive adhesives highlights its effectiveness in achieving durable and reliable adhesive assemblies.

Swift®lock 4790 is a polyurethane-based reactive hot melt adhesive designed for various applications. It boasts a short open time, rapid setting, and high initial strength. Upon curing, it achieves exceptional resistance to cold, heat, and humidity, accompanied by elevated mechanical properties. Approved under RAL 716 standards, it is particularly suitable for coating PVC window profiles with PVC foils. This product offers reliable performance and durability for your adhesive needs.

Millennium Hurricane Force® Lap and Flashing Adhesive is a two-component, fast-setting, essentially VOC-free polyurethane adhesive that forms a strong bond between the roof membrane and substrate within minutes of application. The high viscosity, high-solids formulation of Millennium Hurricane Force® Lap and Flashing Adhesive makes it ideal for installing flashing membrane on vertical substrates and quickly sealing membrane side and head laps.

H.B. Fuller MP5401 is a one-component, heat-curable, thixotropic epoxy paste adhesive. It is a non-sag adhesive that forms strong bonds to metals and ceramics. H.B. Fuller MP5401 has exceptional thermal stability and resistance to water, humidity, and solvents. This product offers high heat resistance and cures in less than 36 seconds via induction or infrared heating. Its typical uses include permanent magnet motors and loudspeaker assembly, air conditioning joint tubes and processors, high-temperature structural bonding, filter end caps, and side seam assembly.