Products

H.B. Fuller All Weather Sealant (12718) is a self-leveling, one-part, modified rubber, solvent-release adhesive, and sealant. It is highly resistant to weather, UV, and ozone, and is easy to apply, providing a long service life. This high-quality, high-solids elastomer is suitable for bonding and sealing metals, galvanized metals, wood, particle board, plywood, rubber, concrete, glass, thermoplastics, thermoset plastics, composites, and low-surface energy substrates.

SILAPRENE® DC-11691/M6127 is a black, brushable, premium-grade contact adhesive that is suitable for use as a general-purpose bonding agent. This adhesive provides tough, durable bonds to many surfaces and is suitable for brush or roll coat application. It has excellent early strength, with a 20-minute open time.

SILAPRENE® DC12718 al weather sealant is a one-part self-leveling, solvent-release product that combines excellent weather, UV, and ozone resistance with ease of application to provide a long service life. It is a high-quality, high-solids elastomeric sealant that provides superior adhesion to a variety of surfaces.

Cyberbond CB AT 6085 is a two component methyl methacrylate adhesive. It is especially suited for bonding metals to different plastics (e.g. ABS, PC, PVC, PMMA, Polyamide) and composites. Cyberbond offers these adhesives in double cartridges in 1:1 or 10:1 ratio with static mixing tubes. This allows an easy and quick application.

H.B. Fuller MP55300 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55300 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions. It offers exceptional bonding for a wide range of substrates.

Adcobond D18-221 is a range of high-performance, black, butyl, pressure-sensitive tapes. These tapes are extruded to conform to either round or flat profiles, adhering to specified dimensional tolerances. Unless otherwise specified, the material is protected on one side with a removable release liner.

H.B. Fuller EV Bond 343 is a medium-hardness, semi-flexible two– component polyurethane adhesive designed for bonding applications requiring resilient bonds, non-sag application and enhanced adhesion to flexible substrates. EV Bond 343 is suitable for bonding metals, ceramics, natural rubber, thermosetting polymers and select types of unprepared thermoplastic substrates such as ABS, polycarbonate and nylon.

H.B. Fuller MP55350 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55350 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions. This adhesive offers maximum open time to align parts.

H.B. Fuller 2075 is a cyanoacrylate adhesive known for its fast plastic bonding properties. It has a medium-high viscosity and is a versatile general-purpose adhesive. It finds applications in catheter assembly, IV sets, tube bonding, airway masks, mechanical device assembly, and balloon bonding in medical device assembly.

Swift®lock 2U340 is a single-component, fully reactive hot melt adhesive that cross-links through a chemical reaction with moisture found in the surrounding air and substrates, to produce a thermoset adhesive. 2U340 was specifically formulated for difficult to bond plastics, such as ABS and vinyl, to a wide variety of metals. 2U340 was designed to provide a good balance of properties. The rheology of the product gives excellent release from roll coaters and no stringing of adhesive. The open time of three minutes is sufficient for assembly of a wide variety of applications. Green strength development of greater than 50 psi in 15 seconds holds difficult substrates together after combining. Long term aging studies show excellent retention of adhesive properties.

H.B. Fuller EH9650 is a fast-setting reactive hot melt adhesive and sealant. It is a 100% solid, one-component material that cures in the presence of moisture. The material is applied warm and sets immediately, allowing handling without the need for heat curing. H.B. Fuller EH9650 has optimum adhesion to a wide range of substrates, including glass, aluminum, stainless steel, plastic-coated wires, common engineered plastics (ABS, PET, PP, vinyl), and woven fabrics, without the need for primers.

H.B. Fuller RP100 is a one-component, medium-viscosity, rapid-curing cyanoacrylate adhesive. It is designed to bond a wide range of similar and dissimilar materials effectively. With a fast handling strength of approximately 10 seconds, it provides quick results and is suitable for general-purpose bonding applications.

H.B. Fuller EV Therm 441 is a modified, highly engineered Structural Acrylic Adhesive designed to provide excellent thermal conductivity while maintaining superior strength and performance properties across a wide range of temperatures and substrates. H.B. Fuller EV Therm 441 is an excellent flame retardant with a UL94 V0 rating.

Flexel™ FN1000 is a reactive, low-temperature heat-activated adhesive film for bonding similar and dissimilar plastic substrates like ABS, PC, PBT, pre-treated olefins (low surface energy plastics), Polyamide, Polyimide, engineering plastics, SMC, FRP, GRP, and advanced composites. FN1000 is also very effective at bonding PET films, textiles, and artificial and genuine leather.

H.B. Fuller SI1500 is a surface-insensitive cyanoacrylate adhesive that is used in applications that require faster cure speeds on parts that are dry and on parts that may be acidic. The SI series bonds a wide range of similar and dissimilar surfaces. This series provides exceptional performance in a wide range of applications.