Products

Swift®lock 2003 is a one-part hot melt adhesive that cures through a chemical reaction with moisture in the air and substrates. It is suitable for automotive interior trim applications and bonding a variety of wood-based substrates, such as soft woods, hard woods, particle board, MDF, papers, and wood veneers.

Körapop 225 is a versatile adhesive and sealant that utilizes silane-modified polymer chemistry. It is a one-component, non-sag product that offers exceptional strength and high flexibility. The product's exceptional UV, weather, and aging resistance make it ideal for a range of applications. Additionally, it is paintable and provides excellent adhesion to many substrates without requiring a primer.

H.B. Fuller SIGEL is a surface-insensitive cyanoacrylate adhesive. This high-viscosity gel is used in applications that require faster cure speeds on parts that are dry and on parts that may be acidic. The SI series bonds a wide range of similar and dissimilar surfaces. This series provides exceptional performance in a wide range of applications.

Tonsan® MS1937 is a high-quality, neutral, elastic single-component adhesive/sealant based on MS-Polymer, which cures by reaction with moisture to an elastic product. The skin formation and curing time are dependent on humidity and temperature, and the curing time also depends on joint depth. By increasing the temperature and moisture, these times can be reduced; low temperatures as well as low moisture retard the process.

Cyberbond CB RM 88 is an anaerobic curing retainer that is specifically designed for use with dynamic loaded parts such as gearings, where a high strength and high-temperature resistance is required. It has a medium viscosity formulation that provides excellent performance and reliability, even under extreme conditions.

HydroArmor® 7740 is a sprayable, latex product that is designed for use on steel, aluminum, fiberglass, and plywood. This highly fire-resistant material can be easily sprayed onto overhead and vertical surfaces to seal joints. Heavy wet film builds can be applied without causing runs, drips, or sagging at bridge seams. Because this material is filled with hollow microspheres, this coating adds little weight to vehicle bodies, even at high film builds.

Weld Mount AT-2010 is a high-performance two-part methacrylate adhesive crafted to bond an array of plastics, metals, and composites. Unveil exceptional bond strength, enduring durability, and remarkable impact and weathering resistance. With a swift fixture time, it's a production favorite. AT-2010 elevates assembly reliability withstanding extreme temperature fluctuations, thermal cycling, and diverse chemicals.

Cyberbond CB SM 77 is an anaerobic adhesive that functions as a sealant and retainer. It has a high strength, high viscosity, and thixotropic properties, as well as high temperature resistance. It is suitable for use as a sealant and retainer for dynamic loaded parts such as bearings and shafts.

MP-55300 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55300 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions. It offers exceptional bonding for a wide range of substrates.

FulaFlex™ 620 is a high-performance, isocyanate-free sealant made from methoxysilyl-terminated silane polymer. It forms a tough, elastic, and weatherproof seal with good chemical resistance, ideal for areas with significant expansion and contraction. Easy to apply and tool off.

Cyberbond CB RH 98 is a high-strength, high-viscosity, thixotropic anaerobic adhesive designed for threads and dynamic loaded cylindrical parts, such as bearings, studs, and rotors, with high temperature resistance and RoHS compliance. Anaerobics are excellent sealants for threads and flanges, they are solvent-free, one component adhesives.

H.B. Fuller 7155-3 heat-expandable sealer is a die-cut, rubber-based sealer that expands with the application of heat to form a flexible, closed-cell foam. It has excellent adhesion to galvanized and primed steel and is recommended for use between metal components to create a watertight seal.

H.B. Fuller SI1500 is a surface-insensitive cyanoacrylate adhesive that is used in applications that require faster cure speeds on parts that are dry and on parts that may be acidic. The SI series bonds a wide range of similar and dissimilar surfaces. This series provides exceptional performance in a wide range of applications.

MP-55420 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55420 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions.

Weld Mount AT-6030 is a cutting-edge two-component structural adhesive featuring a 10:1 mix ratio. Unlock exceptional bonding prowess for metals, carbon fiber, composites, and plastics. Experience streamlined bonding—no priming required for most metals. Crafted with precision for the transportation sector, it ensures minimal read-through on display surfaces. With effortless surface prep, primerless metal bonding, and reduced read-through, AT-6030 excels in diverse assembly operations.