H.B. Fuller RP30

H.B. Fuller RP30 is a low-viscosity, rapid-curing cyanoacrylate adhesive for general-purpose bonding. This product is designed to bond a wide range of similar and dissimilar materials. Its handling strength in most applications is 5 to 10 seconds. This product can be post-applied.

Product Type1K (1 component) Adhesive

Application AreaAppliances

Compatible Substrates & SurfacesAcrylonitrile Butadiene Styrene (ABS), Aluminum, Elastomers & Rubbers, Metal, Neoprene, Phenolics, Plastics, Polycarbonate (PC), Polyvinyl Chloride (PVC), Steel

FeaturesFast Curing, Low Viscosity, Rapid Curing Speed

Technical Data Sheet

Enhanced TDS

Identification & Functionality

Features & Benefits

Applications & Uses

Application Area
Cure Method
General Instructions
  • For optimum results parts should be clean and free from any contamination on the bonding surface. If parts do not mate flush together use a higher viscosity product to compensate for the gap.
  • Factors Affecting Cure Speed Include: GAP: Thin bond line results in faster cure speed. Larger gaps will lengthen cure speed. HUMIDITY: Cure and fixture times can be influenced by the humidity conditions at the time of assembly.
  • The higher the RH the faster cure and fixture times will be. Fixture time data based on our testing is conducted at 50% relative humidity.

Properties

Physical Form
Appearance
Clear wicking liquid
Cured Properties
ValueUnitsTest Method / Conditions
Shear Strength (Steel)min. 2100psiISO 4587
Shear Strength (Aluminum)min. 1750psiISO 4587
Shear Strength (Neoprene)min. 750psiISO 4587
Shear Strength (Acrylonitrile Butadiene Styrene)min. 900psiISO 4587
Shear Strength (Polyvinyl Chloride)min. 900psiISO 4587
Shear Strength (Polycarbonate)min. 900psiISO 4587
Shear Strength (Phenolic)min. 850psiISO 4587
Tensile Strengthmin. 1800psiISO 6922
Damp Heat Aging (Strength on PC after 500 hrs, at 40°C, 95% RH)100.0%
Dielectric Constant (at 1kHz)2 - 3.5ASTM D150
Dissipation Factor (at 1kHz)max. 0.02ASTM D150
Uncured Properties
ValueUnitsTest Method / Conditions
Viscosity30.0cP
Specific Gravity1.05
Set Time (Steel)max. 20s
Set Time (Aluminum)max. 15s
Set Time (Neoprene)max. 5s
Set Time (Acrylonitrile Butadiene Styrene)max. 10s
Set Time (Polyvinyl Chloride)max. 5s
Set Time (Polycarbonate)max. 30s
Set Time (Phenolic)max. 10s

Packaging & Availability

Regional Availability
  • North America

Storage & Handling

Storage Conditions
  • Store product in unopened containers, out of direct sunlight, in a dry location.
  • Material should be stored at or below 22°C.
  • For extended shelf life unopened containers of the product may be refrigerated.