Products

Matching Products Categories (3)

Adhesives & Sealants

Ready-to-Use Products

CASE Ingredients

Adhesives & Sealants

Ready-to-Use Products

CASE Ingredients

529 Products

SDSWith SDS

TDSWith TDS

H.B. Fuller 12880

Product Type:Reactive Adhesive, Aerosol Adhesive, Contact Adhesive, Solventborne Adhesive
Application Area:Carpets
Compatible Substrates & Surfaces:Plastics, Metal, Elastomers & Rubbers, Foam, Wood
Features:Sprayable, Excellent Substrate Adhesion, General Purpose, Low VOC

H.B. Fuller 12880 is a high-quality, general-purpose contact adhesive made from synthetic rubber. It features a solvent system that is free of hazardous air pollutants (HAPs) and has low volatile organic compound (VOC) levels. This adhesive is commonly used for bonding a range of materials, including foam, plastics, carpet, fiberglass-reinforced plastic (FRP), wood, various metals, and elastomers.

H.B. Fuller M6324

Chemical Family:Polychloroprenes
Product Type:Solventborne Adhesive, Elastomeric Sealant, Reactive Adhesive
Application Method:Brush, Trowel
Compatible Substrates & Surfaces:Polyolefins, Wood, Plywood, Elastomers & Rubbers, Concrete, Epoxies, Glass, Polyesters, Masonry, Phenolics, Metal, Polyurethane, Acrylonitrile Butadiene Styrene (ABS)
Features:Oil Resistant, Good Grease Resistance, Alkali Resistant, High Solids Content, Water Resistant, Acid Resistant, Crack Resistant, Chemical Resistant, Peel Resistance, Good UV Resistance, Excellent Substrate Adhesion, Paintable, Excellent Fuel Resistance, High Strength, Service Life Extension, Chipping Resistance, Good Weather Fastness

H.B. Fuller M6324 is a high-performance polychloroprene adhesive and sealant offering ultimate strength, permanent bonds, and a long service life. It offers superior adhesion to metals, galvanized metals, wood, particle board, plywood, rubber, concrete, glass, thermoplastics, thermoset plastics, composites, and low-surface-energy substrates, and its bond strength improves with age.

Foster® 40-20™ Fungicidal Protective Coating

Product Type:Coating
Features:Mold Resistance, Good Toughness, Bacteria Resistant, Fungus Resistant, High Elasticity, Chemical Resistant, Long Term Protection, Stain Resistant, Cost Effective
Application Area:Ceilings, Pipes, Wall, HVAC Ducts
Compatible Substrates & Surfaces:Metal, Wood, Painted Surfaces
Application Method:Brush, Spray
Chemical Family:Acrylics & Acrylates

Foster® 40-20™ Fungicidal Protective Coating is a polyacrylate copolymer emulsion designed for long-term fungicidal effectiveness that remains active even as it ages. This formulation is highly effective at inhibiting the growth of mold and odor-causing bacteria on its surface. It offers a resilient, elastic, and decorative finish that accommodates movement without developing crevices where bacteria can lodge.

WS-8072 Class B

Product Type:2K (2 component) Sealant
Application Area:Fuel Tank, Aerospace Applications
Compatible Substrates & Surfaces:Coated Surfaces, Composites, Aluminum Alloys, Aluminum, Metal
Application Method:Extrusion, Spatula
Chemical Family:Polysulfides
Features:Thixotropic, Fast Curing, Fungus Resistant, Corrosion Resistant, High Temperature Resistance, Light Weight, Oil Resistant, Non-Sagging, Excellent Fuel Resistance, Room Temperature Curing, Low Density, Good Adhesion, Excellent Productivity

WS-8072 Class B is a non-chromate corrosion inhibitive, light weight, fast curing polysulfide sealant. Two-part manganese cured polysulfide system with eco-friendly profile provides an effective barrier against the common causes of corrosion on aluminum and between dissimilar metals. AC-8072 B retains excellent performance characteristics at temperature excursions up to 360°F. Typical applications include sealing of fay surfaces of mating parts of aircraft structure to prevent corrosion and channeling leakage. WS-8072 Class B has outstanding retention of physical properties when exposed to aviation fuel and oils. It is a thixotropic paste with non-sag characteristics an able to be applied by an extrusion gun or with a spatula.

PVC TrimWelder™ Fast Cure

Product Type:2K (2 component) Adhesive, Structural Adhesive
Application Area:Panels, Composite Panel
Compatible Substrates & Surfaces:Nylon, Fiberglass, Wood, Ceramic, Composites, Stone, Polyvinyl Chloride (PVC), Metal
Chemical Family:Acrylics & Acrylates, Acrylics, Acrylates & Methacrylates
Features:Medium Viscosity, UV Resistant, Fast Curing, Excellent Flexibility, Improved Adhesion, Excellent Toughness, Fast Setting, Shock Resistant

PVC TrimWelder™ Fast Cure is a medium-viscosity, solvent-free structural adhesive system that provides flexibility, toughness, and surface adhesion for bonding all forms of PVC to themselves, metals, or wood. Cured performance shows excellent adhesion and bond strength to nylons, polystyrene, fiberglass, reinforced plastics, stone, ceramics, and most plain and plated metal components. This material can withstand thermal cycling and shock loading between dissimilar materials. Fast Cure is ready for handling in 10 to 30 minutes.

Cyberbond CB SH 58

Product Type:Anaerobic Sealant
Application Area:Gaskets, Flanges
Compatible Substrates & Surfaces:Steel, Stainless Steel, Brass, Metal
Chemical Family:Dimethacrylates
Features:Thixotropic, Medium Strength, High Viscosity, Good Gap Filling Capabilities, Alcohol Resistant

Cyberbond CB SH 58 is an anaerobic curing sealant that is designed for use in flange and instant gasket applications. It has a medium strength and very high viscosity formulation, which makes it ideal for use in situations where gap filling properties are required. It is a thixotropic natured adhesive.

Cyberbond CB 1699

Product Type:Solvent free (100% Solids) Adhesive, Reactive Adhesive, 1K (1 component) Adhesive
Compatible Substrates & Surfaces:Plastics, Elastomers & Rubbers, Metal, Ethylene Propylene Diene Monomer (EPDM)
Chemical Family:Cyanoacrylates
Features:Water Resistant, Fast Setting, High Viscosity, Good Gap Filling Capabilities, Alcohol Resistant

Cyberbond CB 1699 is a fast-bonding, high-viscosity cyanoacrylate. It is not really made to bond metal to metal, but when it comes to combinations with rubber or plastic, this product can be very suitable. Due to its high viscosity, CB 1699 can fill smaller gaps.

H.B. Fuller 75RC

Product Type:Retaining Compound, 1K (1 component) Adhesive, Anaerobic Adhesive
Application Area:Threading Operations, Bushings, Bearings, Appliances, Cylindrical Fitting Parts
Compatible Substrates & Surfaces:Metal
Chemical Family:Urethane Methacrylates
Features:Hydrocarbon Resistant, Vibration Resistance, Water Resistant, Heat Resistance, Fast Curing, High Flexibility, Chemical Resistant, Corrosion Resistant, Oil Resistant, Fast Cure, High Strength

H.B. Fuller 75RC is a fast-curing, high-strength anaerobic adhesive. It is used for locking and sealing threads and for retaining cylindrical components. It has a delayed setting time but is highly resistant to heat, corrosion, vibrations, water, gasses, oils, hydrocarbons, and many chemicals.

Foster® Chil-Lock CP-240 Asbestos Removal Agent/Post Removal Sealer

Product Type:Primer, Asbestos Remover , Sealer
Compatible Substrates & Surfaces:Steel, Metal
Features:Water-based
Application Method:Spray

Foster® Chil-Lock CP-240 Asbestos Removal Agent/Post Removal Sealer is an economical, fire-retardant, polymeric water-based asbestos removal agent and post-removal sealer. In its role as a post-removal sealer, it is specifically designed to mist, securely bind, and seal free asbestos fibers and any residual asbestos-containing material (ACM) remaining after removal. This highly effective solution firmly locks ACM onto cleaned, exposed surfaces and polyethylene sheeting within the containment area, preventing the release of loose fibers into the air.

Foster® Fire Resistive Adhesive 81-33

Product Type:Adhesive
Application Area:Joints
Compatible Substrates & Surfaces:Metal, Iron, Polyurethane (PU) Foam, Stainless Steel, Aluminum
Application Method:Trowel
Features:Fire-Resistant, Water Resistant, Fast Setting, Humidity Resistant

Foster® Fire Resistive Adhesive 81-33 is a high-quality adhesive designed for securely bonding thermal insulation to various structural surfaces. This quick-setting adhesive exhibits excellent specific adhesion to materials such as iron, steel, aluminum, and most types of thermal insulation. Notably, it can be employed without the need for mechanical fastening, making it suitable for marine hull insulation applications.

Flexel™ EM9002

Chemical Family:Polyurethanes (PU)
Product Type:Solvent free (100% Solids) Adhesive, Reactive Adhesive, Contact Adhesive, 1K (1 component) Adhesive
Application Area:Electronic Components
Compatible Substrates & Surfaces:Leather, Pre-treated Olefins, Acrylonitrile Butadiene Styrene (ABS), Foils, Textiles, Plastics, Polycarbonate (PC), Metal
Features:Good Peeling Strength, Excellent Shear Strength, Heat Resistance, Chemical Resistant, Low Temperature Performance, Long Shelf Life, Excellent Substrate Adhesion, Excellent Toughness

Flexel™ EM9002 is a heat-activated adhesive film designed to bond plastic substrates such as ABS, PC, pre-treated olefins, textiles, artificial leather, and genuine leather at low temperatures. This adhesive film exhibits high fracture toughness, peel strength, and shear strength while maintaining flexibility. It offers excellent adhesion to plastics and textiles.

Rakoll® 5016

Product Type:Hot Melt Adhesive, Reactive Adhesive
Application Area:Woodwork, Wooden Surfaces, Flat Lamination
Compatible Substrates & Surfaces:Plastics, Wood, Composites, Metal
Application Method:Roller, Spray
Chemical Family:Polyurethanes (PU)
Features:Good Green Strength, Low Viscosity, High Strength, Good Wettability

Rakoll® 5016 is a reactive hot-melt adhesive designed for excellent performance in spray applications. It has a low viscosity and offers improved wettability and good initial strength. The adhesive is formulated with a low concentration of isocyanate monomer, making it free from hazardous labeling and providing a safer working environment.

H.B. Fuller EY2562

Chemical Family:Epoxy & Epoxy Derivatives
Product Type:Reactive Adhesive, Epoxy Adhesive, 2K (2 component) Adhesive, Structural Adhesive
Application Area:Aerospace Applications
Compatible Substrates & Surfaces:Composites, Plastics, Metal
Features:Chemical Resistant, Light Weight, Good Thermal Stability, Flame Retardant, Good Sagging Resistance, Room Temperature Curing, Self Extinguishing

H.B. Fuller EY2562 is designed to fill the need for a strong, pourable, and lightweight filler for honeycomb core panels. It can be used to pot fasteners or as an edge closeout after the panel is trimmed to contour. It is fire retardant, resistant to long exposure to 350°F, and cures at room temperature in thicknesses in excess of one inch.

GorillaPro® AS10

Product Type:1K (1 component) Sealant, Thread Sealant, Anaerobic Sealant
Application Area:Thread Sealing, Gaskets, Pipes
Compatible Substrates & Surfaces:Metal
Chemical Family:Methacrylate Ester
Features:Acid Resistant, Solvent Resistance, Anti Dripping, Alcohol Resistant

GorillaPro® AS10 is a single-component, anaerobic pipe sealant with PTFE. It is designed for locking and sealing metal pipes and fittings, providing immediate low-pressure sealing performance on tapered pipe threads. It is an anaerobic cure adhesive that protects critical components by preventing liquid and gas leaks from escaping threaded or flanged fittings. By using GorillaPro® AS10, one can avoid catastrophic equipment failure, as it effectively prevents leaks and minimizes downtime.

Swift®melt 1911

Product Type:Hot Melt Adhesive, Hot Melt Pressure Sensitive Adhesive, Pressure Sensitive Adhesive
Application Area:Graphic Arts, Paper Converting
Compatible Substrates & Surfaces:Paper, Polypropylene (PP), Plastic Film, PET Film, Metal, Polyethylene (PE) Film

Swift®melt 1911 is a hot melt pressure-sensitive adhesive offering strong adhesion across various substrates, with exceptional performance even at low temperatures. Ideal for versatile bonding applications.

Show

of 529 results