Products

HS Butyl 0372 is an extruded butyl tape laminated with a fixed polyethylene liner, designed for sealing joints in ducting. It is a high-performance tape that offers very high tack, good adhesion, and ease of use, making it suitable for applications requiring reliable and durable sealing.

Adcoseal 4189-3 sound damping pad is a combination of energy-absorbing mastic material and an aluminum top layer that provides maximum sound damping. The mastic damping material converts vibratory energy into heat through extension and compression, effectively reducing noise levels on the treated substrate. The aluminum top layer maximizes this effect by redirecting any escaping vibratory energy back into the mastic layer.

HS Butyl Fleeceband 0318 is a butyl tape laminated with a non-woven polyester or polypropylene fleece. It is designed for sealing floor-to-wall joints and around drains in wetrooms, filling cracks prior to plastering, and sound-deadening applications, offering flexibility and conformability for easy application. This ready-to-use tape provides an effective sealing solution for various construction and repair needs.

HS Butyl 0303 is a general-purpose butyl tape used for sealing applications. It is suitable for sealing lap joints in roofing and cladding systems, duct flanges in HVAC systems, compression joints and seams, and caravans, offering excellent adhesion to multiple substrates. The tape is conformable, easy to use, and designed as a ready-to-use product for various sealing needs.

HS Butyl 2239 is an extruded butyl tape designed for a variety of sealing applications, including compression joints and seams, vehicle construction, membranes, and ridge tiles. It offers excellent adhesion to multiple substrates and is conformable for easy application. This ready-to-use tape also provides good UV resistance, making it suitable for outdoor and exposed environments.

H.B. Fuller MP5405FLEXMV is a two-part unfilled rubber modified medium viscosity epoxy adhesive designed for high-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid material that is free-flowing in viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 20 - 30 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Hydra FAST-EN® DC-12465 spray system is a two-part adhesive designed to bond open-cell urethane foams, including high-stress geometries. It's also suitable for bonding open- or closed-cell foams, woods, plastics, fabrics, and some metals to porous or non-porous surfaces. With an aggressive early tactic and no solvents, it's user-friendly and addresses many of the common problems of other two-part systems. It's an alternative for applications where solvent-based systems pose concerns for health or environmental reasons.

Foster® 40-20™ Fungicidal Protective Coating is a polyacrylate copolymer emulsion designed for long-term fungicidal effectiveness that remains active even as it ages. This formulation is highly effective at inhibiting the growth of mold and odor-causing bacteria on its surface. It offers a resilient, elastic, and decorative finish that accommodates movement without developing crevices where bacteria can lodge.

Swift®lock 9053 is a single-component, fully reactive hot melt polyurethane adhesive that cross-links through a chemical reaction with moisture found in the surrounding air and substrates, resulting in a thermoset adhesive. It was specifically formulated for use in the assembly of recreational vehicle subcomponents, such as skins, composite walls, floors, ceilings, and front caps.

H.B. Fuller Royal Seal 1000 Black (13011) is a sag-resistant, one-part, white, block co-polymer, solvent-release adhesive, and sealant. It provides ease of application, versatility, high ultimate strength, permanent bonds, and a long service life. It is suitable for bonding and sealing metals, galvanized metals, wood, particle board, plywood, rubber, concrete, glass, thermoplastics, thermoset plastics, composites, and substrates with low surface energy.

Millennium 1-Part Pumpable Sealant is a state-of-the-art, single-component construction sealant that is solvent-free and suitable for general purpose use. Its unique formula, developed using the latest technology, ensures it is non-gassing, providing a solid filler profile for superior adhesion and durability. This sealant also exhibits excellent weathering properties, making it perfect for a range of applications.

Tonsan® 1262 is an anaerobic adhesive with a versatile range of applications. It falls into the category of ready-to-use products and serves as a thread locker, solvent-free (100% solids) adhesive, 1K (1 component) adhesive, and anaerobic adhesive. Key features include thixotropic properties, high strength, good gap-filling capabilities, and room temperature curing. This adhesive is primarily utilized in the industrial sector, specifically for applications related to equipment and parts.

Tuskbond Infusion 900 - 500ml Aerosol is a super tacky spray adhesive developed for holding heavy and thick mats in place during resin infusion processes. The product is extremely tacky and maintains its tack for long periods of time, making the product perfect for larger areas or deep crevices in the mould. Tuskbond Infusion 900 has a web spray pattern which provides a cross linking effect over the fibres of the reinforcement.

H.B. Fuller 7155-3 heat-expandable sealer is a die-cut, rubber-based sealer that expands with the application of heat to form a flexible, closed-cell foam. It has excellent adhesion to galvanized and primed steel and is recommended for use between metal components to create a watertight seal.

H.B. Fuller MP5430NS is a two-part modified epoxy adhesive designed for medium-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid polymer and is delivered in a non-sagging viscosity. It provides good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 40 - 50 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.