Products

H.B. Fuller EV Seal 901 BCF is a highly compressible PVC foam core encapsulated with high-tack butyl adhesive/sealant. This flexible material conforms readily to corners and irregular contours. It gives a secure seal that helps protect against water penetration and prevents corrosion and moisture damage.

H.B. Fuller HSC13 is a solvent-based adhesive. Notable features include fast tacking, high strength, and high-temperature resistance, making it suitable for spray adhesive applications. The adhesive also exhibits excellent water and moisture resistance, ensuring durability even in challenging environments. It has a high solids content and a low soak-in web pattern, providing extended coverage for efficient usage. H.B. Fuller HSC13 is commonly used in woodworking, furniture, cabinets, marine, RV, upholstery, and carpet applications. It is designed for bonding metals, plastics, wood, laminates, rubber, insulation, glass, fabric, thin films, foils, and urethane foam. The versatile nature of H.B. Fuller HSC13 makes it suitable for cylinder packaging applications, ensuring reliable and durable bonds. The adhesive is non-staining and complies with low VOC (volatile organic compounds) and HAP (hazardous air pollutants) regulations, making it environmentally friendly and LEED (Leadership in Energy and Environmental Design) compliant.

H.B. Fuller MP5405 is a two-part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough, semi-rigid material with a free-flowing viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was especially formulated to have a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. Handling strength is normally achieved at room temperature within 3 - 5 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

SILAPRENE® DC12906 is a high-quality polychloroprene-based HPL contact adhesive that bonds a variety of materials, such as decorative laminates, linoleum, flake board plywood, steel, aluminum, and galvanized, to counter and cabinet tops. It is also used for bonding a wide variety of skins and cores in laminated construction. This product is designed to provide easy and uniform coverage in high-speed manual or automated spray applications.

H.B. Fuller MP55310 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55310 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions.

EternaBond® FGT BC-1101 is a highly compressible PVC foam core encapsulated with a high-tack butyl adhesive/sealant. This flexible material easily conforms to corners and irregular contours. It provides a secure seal that helps protect against water penetration and prevents corrosion and moisture damage. Furthermore, it eliminates the need for cap sealing by gasketing, thereby improving quality.

H.B. Fuller MP5430 is a two-part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough, semi-rigid material with a free-flowing viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 volume mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 20 - 30 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

H.B. Fuller MP55350 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55350 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions. This adhesive offers maximum open time to align parts.

H.B. Fuller MP55300 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55300 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions. It offers exceptional bonding for a wide range of substrates.

H.B. Fuller TS365 Marine Chocking Compound is a two-part epoxy mixture with good pouring performance. After curing, it has a high compressive strength and compressive modulus of elasticity, as well as excellent heat resistance, impact resistance, and self-extinguishing from fire. TS365 can be applied for positioning during assembly of various marine equipment, such as the main diesel engine, auxiliary machinery, stern tube, deck machinery, etc.

Körapur® 177 is a one-component, flexible and high-performance direct glazing sealant designed for vehicle glass. The product is a polyurethane-based sealant that prevents contact corrosion in aluminum-body vehicles and is suitable for use with integral aerials. It has good stability and workability, with a non-sag consistency that makes it easy to apply.

H.B. Fuller HSEA is a solvent-based adhesive. The adhesive provides fast tacking, ensuring quick adhesion, and exhibits high strength and temperature resistance. Its fine pattern spray allows for precise and controlled application. H.B. Fuller HSEA demonstrates excellent water and moisture resistance, making it suitable for applications where exposure to moisture is a concern. The adhesive has a high solid content and a low soak-in pebble pattern, enabling extended coverage and maximizing its usage. The adhesive is commonly used in various industries such as woodworking, furniture, cabinets, marine, RV, upholstery, and carpeting. It provides reliable bonding for a wide range of materials, including metals, plastics, wood, laminates, rubber, insulation, glass, fabric, thin films, foils, and urethane foam.

H.B. Fuller MP5405FLEXMV is a two-part unfilled rubber modified medium viscosity epoxy adhesive designed for high-speed bonding of metals, ceramics, and most plastics. It cures to a tough, semi-rigid material that is free-flowing in viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was specially formulated to a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. A handling cure is normally achieved at room temperature within 20 - 30 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

H.B. Fuller MP55420 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55420 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions.

H.B. Fuller PU1956 is designed for bonding applications. One of the key advantages of H.B. Fuller PU1956 is its very good bonding strength to glass, metal, and other materials. This adhesive forms strong and durable bonds, providing reliable adhesion between different substrates. Another notable feature of H.B. Fuller PU1956 is its outstanding weather and aging resistance. H.B. Fuller PU1956 also exhibits good filling and sealing properties. It is well-suited for applications in the appliance industry, as well as other industries that require durable and weather-resistant bonding solutions.