Products

Magik VB 95 is a UL Classified, anti-fungal, low VOC, water-based, fire retardant, high-solid vapor barrier coating for duct insulation. It is flexible, washable, tough, abrasion-resistant, and has low odor. Magik VB 95 offers excellent water resistance and low water permeance, making it suitable for high-humidity environments. It effectively retards water vapor permeation and is specially formulated for both indoor and outdoor applications.

HydroArmor® 7763 is a sprayable latex coating designed for use on aluminum, fiberglass, cold-rolled steel, galvanized steel, and most metal primers. It is formulated with additives to improve adhesion to oily metals. It provides very good corrosion protection, even when applied as thinly as 10 mils wet. This low-viscosity, sag-resistant coating can be easily sprayed onto exposed underbody areas and into restricted areas such as tubing and "hidden" areas accessible only with spray wands. Wet film builds of up to 20 mils can be applied without runs, drips, or sags.

Childers® Chil-Duct™ CP-148 Sealant/Mastic is a fibrated water-based duct sealant and mastic designed for all heating, ventilating, and air conditioning duct systems. It can be easily applied with a brush and does not drip or sag during application. Once dry, it creates a durable, flexible, UV- and water-resistant air seal.

MP-55305 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55305 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions. It offers exceptional bonding for a wide range of substrates.

FA4844 is a single part Tie Cement specifically designed for use in the installation of protective low plasticized PVC sheet in holding tanks, chrome-plating baths, hydroelectric and other power generating facilities. Use in conjunction with our PC 4426 Primer for bonding low plasticized PVC liner to sandblasted metals, concrete, fiberglass and wooden tanks which are subject to standard operational temperatures ranging from - 20 deg. F. to 160 deg. F. Available in Neutral or Black, FA 4844 is characterized by an aggressive building tack throughout its 30-minute bonding range. It rapidly develops a high strength, resilient bond between the liner and pre-primed tank substrate. The combination primer / tie cement system typically yields a bond strength of 20 lbs. per linear inch between the liners and referenced tank substrates after 14 days and demonstrates excellent resistance to grease, oils, and water.

H.B. Fuller EV Therm 441 is a modified, highly engineered Structural Acrylic Adhesive designed to provide excellent thermal conductivity while maintaining superior strength and performance properties across a wide range of temperatures and substrates. H.B. Fuller EV Therm 441 is an excellent flame retardant with a UL94 V0 rating.

Millennium Hurricane Force® 1-Part Membrane Adhesive is a highly elastomeric, one-part asphalt-modified urethane adhesive that is solvent-free and does not require mixing. The VOC content of the adhesive is less than 250 g/L. Millennium Hurricane Force® 1-Part Flashing Adhesive is approved for use in VOC regulated markets such as California and the OTC States.

MP-55320 is a high-performance, two-part methacrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. H.B. Fuller MP55320 greatly increases the reliability of finished assemblies with its exceptional flexibility, ability to withstand extreme temperature fluctuations and thermal cycling, and resistance to a wide range of chemicals and environmental conditions.

H.B. Fuller MP54190GR is a two-part adhesive that is easy to mix and cures at room temperature, making it suitable for bonding a variety of materials, including metals, glass, ceramics, and plastics. This medium-viscosity polyamide/epoxy adhesive is recommended for low-stress, high-impact, and high-peel strength bonding applications of dissimilar materials, offering superior thermal shock resistance, dimensional stability, and resistance to water, weather, and many chemicals. This adhesive system is designed for use in side-by-side dispensing cartridges and metering, mixing, and dispensing equipment with a recommended 1A:1B volume mix ratio. Handle cure time is typically 16–24 hours at room temperature, but this can be accelerated with heat. It's worth noting that cooler temperatures will increase work and cure times, and substrate heat-up time should be taken into account.

Körapur® 645 is a 2-part PUR adhesive that ensures the performance required to enhance the flexibility of the tile while increasing its resistance, fulfilling all technical requirements for a successful result. It sets quickly and has no residual tack that prevents tiles from sticking together.

Millennium Term Bar Tape (MT-0260) Black Butyl Tape is a permanently flexible butyl tape used underneath an EPDM waterproofing membrane where a termination bar will be installed. The product is easy to use and provides a cleaner application when compared to pumpable sealants. Millennium Term Bar Tape has excellent adhesion to a variety of surfaces, such as ABS, acrylic, aluminum, brick, concrete, epoxy, fiberglass, glass, steel, wood, rubber, and painted substrates. It also exhibits exceptional performance in low-temperature environments. All surfaces must be clean, dry, and free of foreign contaminants such as dust, oil, and loose paint before the application of Millennium Term Bar Tape.

H.B. Fuller® PD-0366 is a waterborne adhesive formulated as a binder and resin. It is designed for use on fiberglass surfaces. This liquid adhesive provides excellent bonding performance and is classified under vinyl acetate homopolymers, offering a durable solution for adhesive applications requiring effective binding.

Millennium Hurricane Force® Lap and Flashing Adhesive is a two-component, fast-setting, essentially VOC-free polyurethane adhesive that forms a strong bond between the roof membrane and substrate within minutes of application. The high viscosity, high-solids formulation of Millennium Hurricane Force® Lap and Flashing Adhesive makes it ideal for installing flashing membrane on vertical substrates and quickly sealing membrane side and head laps.

Millennium Hurricane Force® 1-Part Flashing Adhesive is a highly elastomeric, one-part asphalt-modified urethane adhesive that is solvent-free and does not require mixing. The VOC content of the adhesive is less than 250 g/L. Millennium Hurricane Force® 1-Part Flashing Adhesive is approved for use in VOC regulated markets such as California and the OTC States.

HydroArmor® 7770 is a water-based latex coating that provides lightweight and sound-dampening protection. It can be easily sprayed onto overhead and vertical surfaces to seal joints effectively. This coating is highly durable, even under the harshest service conditions. It is commonly used for lap sealing and sound deadening bonding to various materials such as cold-rolled steel, galvanized steel, stainless steel, primed steel, aluminum, fiberglass, and plywood. HydroArmor® 7770 belongs to the category of water-based coatings.