Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Image
- Composition
RoofSeal™ utilizes EternaBond®’s advanced MicroSealant ® Technology, a 100% solids formulation of synthetic resins, thermoplastics and non-curing rubber with a builtin primer. It is bonded to a UV stable backing. The adhesive coating is protected by a release liner, to be removed prior to application.
- Composition
RoofSeal™ utilizes EternaBond®’s advanced MicroSealant ® Technology, a 100% solids formulation of synthetic resins, thermoplastics and non-curing rubber with a builtin primer. It is bonded to a UV stable backing. The adhesive coating is protected by a release liner, to be removed prior to application.
- Product Information
Available Widths Up to 48” Backer Colors Black, Gray, Tan, and White Standard Case Quantity 100 sq.ft. per case Standard Roll Size 2” x 50’, 4” x 50’, 3” x 50’, 6” x 50’ Total Thickness 35mil
Features & Benefits
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Basic Use
RoofSeal™ is used to seal roof joints (seams) and tears, skylights, etc. Perfect for repairing and restoring roofs on mobile homes and RVs. RoofSeal™ seals to itself so it can be cut and folded around an object.
- Basic Use
- RoofSeal™ is used to seal roof joints (seams) and tears, skylights, etc.
- Perfect for repairing and restoring roofs on mobile homes and RVs.
- RoofSeal™ seals to itself so it can be cut and folded around an object.
- Surface Preparation
- Surface must be clean and dry.
- Moisture, dust, dirt or other foreign matter should be removed.
- Remove oil and grease, etc. with EternaClean® or a non-residue cleaner such as acetone or lacquer thinner.
- Remove salt and other contaminants.
- Surface Preparation
Surface must be clean and dry. Moisture, dust, dirt or other foreign matter should be removed. Remove oil and grease, etc. with EternaClean® or a non-residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants.
- Application Guidelines
Surfaces must be clean and dry before applying Roof- Seal™. Install RoofSeal™ over the repair area, removing the release liner gradually to prevent contamination of the adhesive prior to application. Rub or roll with pressure using your hand or steel roller to activate bonding process.
- Application
- Surfaces must be clean and dry before applying Roof- Seal™.
- Install RoofSeal™ over the repair area, removing the release liner gradually to prevent contamination of the adhesive prior to application.
- Rub or roll with pressure using your hand or steel roller to activate bonding process.
- Limitations
- RoofSeal™ is not compatible with silicone sealants or lubricants.
- Avoid using silicone based products near Roof- Seal™.
- Limitations
RoofSeal™ is not compatible with silicone sealants or lubricants. Avoid using silicone based products near Roof- Seal™.
Properties
- Typical Properties
- Recommended Operating Conditions
- Application Properties
- Pliability
- No cracks in membrane
- Note
* - For best results, it is recommended to use EternaPrime® for temperature below 40°F. Keep tape at room temperature before applying.
- Note
*For best results, it is recommended to use EternaPrime® for temperature below 40°F. Keep tape at room temperature before applying.
| Value | Units | Test Method / Conditions | |
| 180° Peel (at 23°C) | 5 | pli | — |
| Elongation | 700 | % | ASTM D 882 |
| Elongation | 700.0 | % | ASTM D 882 |
| Low Temperature Flexibility (1/2” radius at -34°C) | Passes | — | ASTM C765 |
| Value | Units | Test Method / Conditions | |
| Application Temperature* | 4 - 65 | °C | — |
| Service Temperature | -40 - 100 | °C | — |
| Value | Units | Test Method / Conditions | |
| Application Temperature* | 4 - 65 | °C | — |
| Service Temperature | - 40 - 100 | °C | — |
Technical Details & Test Data
- Technical Data
Property Typical Value Test Method Pliability No cracks in membrane Low Temperature Flexibility Passes
1/2” radius at -34°C (-30°F)ASTM C765 180° Peel (at 23°C) 5 pli ASTM D413
Packaging & Availability
- Regional Availability
- Product Information
Available Widths Up to 48” Backer Colors Black, Gray, Tan, and White Standard Case Quantity 100 sq.ft. per case Standard Roll Size 2” x 50’
3” x 50’
4” x 50’
6” x 50’
Total Thickness 35mil
Storage & Handling
- Shelf Life
- 5 Years
- Storage Condition
Store material in original container at temperatures between 4°C and 38°C.
- Storage Conditions
Store material in original container at temperatures between 4°C and 38°C (40°F to 100°F).