Products

Foster® Air-FAS™ Duct Sealant 32-18 is an economical, water-based sealant designed for use on low, medium, and high-velocity ducts. It is UL-181 B-M listed, ensuring its compliance with industry standards. This non-fibrate sealant forms a flexible and durable seal to prevent air leakage. It is provided in a special thixotropic consistency, making it easy to apply using various methods such as a brush, glove, trowel, or power extrusion.

Cyberbond CB TM 66 is an anaerobic adhesive that is specifically designed for threadlocking applications that require a high strength and medium viscosity formulation. It is ideal for use in permanent locking and sealing of threaded fasteners, providing excellent performance and reliability.

Cyberbond CB TM 47 is a medium strength, medium viscosity, thixotropic anaerobic adhesive designed for locking and sealing threaded fasteners. It can be easily disassembled using standard hand tools, making it a versatile option for various applications. Anaerobics are solvent-free, one component adhesives.

Weld Mount AT-8040 is a 1:1, meter-mix methacrylate-based structural adhesive. Engineered to bond a variety of materials including thermoplastics, thermosets, composites, and metals, this adhesive shines in versatility. Count on its remarkable adhesion to various metal surfaces like aluminum, galvanized, stainless, and plated steels. Surpassing the strength of PVC, ABS, acrylic, polycarbonate, fiberglass, and many other composites and engineering plastics, it forms robust, high-strength bonds with no surface preparation needed. With a quick 3-4 minute open time, you can expect swift fixture. This non-sag, high-viscosity adhesive, enriched with a special filler, secures anchoring studs and clips to walls and ceilings. Reach for AT-8040 for dependable low-temperature impact and peel strength. This formula is compliant with Reach regulations and is acid-free, ensuring reliability and quality.

H.B. Fuller HAPs Free Sealant (12781) is a one-part, block co-polymer, solvent-release adhesive and sealant with high ultimate strength and permanent bonds. It is sag-resistant, easy to apply, and provides a long service life. It is suitable for bonding and sealing metals, galvanized metals, wood, particle board, plywood, rubber, concrete, glass, thermoplastics, thermoset plastics, composites, and substrates with low surface energy.

Cyberbond CB TM 44 is a medium strength, medium viscosity, thixotropic anaerobic adhesive for threadlocking and sealing of threaded fasteners that can be disassembled with standard hand tools. Anaerobics are excellent sealants for threads and flanges, they are solvent-free, one component adhesives.

Weld Mount AT-804030 is a versatile 2K adhesive for all your bonding needs. This amber-colored adhesive, categorized as a structural adhesive, offers exceptional performance on various substrates like metal, plastics, fiberglass, stainless steel, and more. Its room temperature curing, combined with features such as chemical resistance, substrate adhesion, and toughness, makes it a reliable choice for demanding applications.

Cyberbond CB RH 99 is an anaerobic adhesive that is designed for use as a retainer. It has a high strength, high viscosity, and high temperature resistance formulation, which makes it ideal for use in dynamic loaded parts like those found in gearboxes. Additionally, it is RoHS compliant, ensuring that it meets current environmental regulations.

HydroArmor® 7755 is a sprayable latex coating designed for use on aluminum, fiberglass, cold-rolled steel, galvanized steel, and most metal primers. HydroArmor® 7755 is formulated to give very good corrosion protection when applied as thinly as 20 mils wet. This low viscosity, sag-resistant coating can be easily sprayed onto exposed underbody areas and into restricted areas such as tubing and "hidden" areas accessible only with spray wands. Wet film builds of 30 mils or more can be applied without runs, drips, or sags.

Cyberbond CB RL 67 is a high-strength, low-viscosity retainer designed for locking and sealing threaded fasteners, bearings, and bushings. Its low viscosity allows for wicking into tight spaces, and post-application is possible. It is RoHS compliant, meaning it is free from hazardous materials such as lead and mercury.

HydroArmor® 7763 is a sprayable latex coating designed for use on aluminum, fiberglass, cold-rolled steel, galvanized steel, and most metal primers. It is formulated with additives to improve adhesion to oily metals. It provides very good corrosion protection, even when applied as thinly as 10 mils wet. This low-viscosity, sag-resistant coating can be easily sprayed onto exposed underbody areas and into restricted areas such as tubing and "hidden" areas accessible only with spray wands. Wet film builds of up to 20 mils can be applied without runs, drips, or sags.

Tonsan® 1522 Black is a two-component adhesive that can cure quickly at room temperature, providing high bond strength. This material is recommended for use with metals, plastics, and glass. Typical applications of the product involve the sealing and bonding of PV modules.

HydroArmor® 8800BL is a sprayable water-based coating designed to quickly build a high level of water resistance. It is formulated to provide excellent adhesion to stainless steel, wood, and composite decking and to provide very good corrosion protection when applied with a wet film thickness as low as 0.020". This coating can be easily sprayed onto exposed underbody areas, and wet film builds of 0.040" can be applied without runs, drips, or sags.

EternaBond® RoofSeal™ is a one-step permanent repair system for virtually all roof types and accessories. It features a UV-stable backing and creates a waterproof, moisture-proof, and airtight barrier with no additional sealing required. RoofSeal™ remains flexible at temperatures as low as -57 °C, making it virtually impossible to thermally shock the seam and cause a leak. RoofSeal™ bonds to a wide range of surfaces, including roof materials such as EPDM, TPO, Hypalon, aluminum, galvanized steel, wood, and fiberglass. It is important to ensure all surfaces are clean, dry, and free of debris prior to installation.

Web Seal® Tape is designed to hold coatings, whether water or solvent based, on virtually all roofs. This superior, faster method of waterproofing eliminates the dependence on the roof coating as a water barrier and makes the roof water-tight prior to application of the coating. WebSeal remains flexible even in temperatures as low as -70°F, making it impossible to thermally shock the seam and cause a leak. It bonds to a wide range of surfaces, including difficult roof materials such as EPDM, TPO, CSPE/Hypalon, most PVC, CPE, SBS, APP modifieds, asphalt BURs, coal tar BURs, plus all metal roofs, tiles, shingles, aluminum, Galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB, etc.