Cyberbond CB SH 27 is a medium-strength, high-viscosity anaerobic adhesive designed for use as a pipe and flange sealant, as well as an instant gasket. It can be easily dismantled if needed. Anaerobics are excellent sealants for threads and flanges. Anaerobics are solvent-free, one component adhesives.

Product Type: 1K (1 component) Adhesive, Anaerobic Adhesive

Application Area: Flanges, Gaskets, Pipes

Compatible Substrates & Surfaces: Brass, Galvanized Steel, Metal, Stainless Steel, Steel

Chemical Family: Dimethacrylates

Features: Alcohol Resistant, High Viscosity, Medium Strength

Technical Data Sheet
Message our experts with questions
Robert Blackstone avatar

Robert Blackstone

Global Leader - Inside Sales

Please reach out to me with any questions, I am happy to assist you in finding the right product or learning more about our storefront

Enhanced TDS

Identification & Functionality

Features & Benefits

Labeling Claims
Ready-to-Use Product Features
General Information about Anaerobic Adhesives

Anaerobic adhesives and sealants cure by means of metal contact and/or due to the absence of air. Due to these facts they are only suitable for bonding and sealing metals. Therefore, as such they are not traditional adhesives as commonly known, but are specifically good for the bonding of metal cylindrical parts where torsion-load and shearing-load play an important part. Furthermore, anaerobics are excellent sealants for threads and flanges. Anaerobis are solvent free, one component adhesives. There are active metals (construction steel, tool steel, free cutting steel, brass, copper) and inactive metals (high alloyed or stainless steel, aluminum, electroplated surfaces, cast iron). While products used on active metals cure very fast, the same products need longer times to cure when used on inactive metals. But this does not influence the intended strength.

Applications & Uses

Markets
Applications
Application Area
Compatible Substrates & Surfaces
Clean Surface

The surface condition of the mating parts has an enormous influence on the success of a bond. To achieve good bonding success the mating parts should be clean. A certain amount of e.g. oil can be tolerated.

Properties

Physical Properties
ValueUnitsTest Method / Conditions
Density (at 20°C, monomer)1.1g/cm³-
Gap Filling Capacity (Monomer)0.1 - 0.4mm-
Viscosity (Cone/plate, at 20°C at 160 s⁻¹)6.000 - 9.000mPa.s-
Viscosity (Cone/plate, at 20°C at 0.5 s⁻¹)70.000 - 120.000mPa.s-
Compressive Shear Strength (on steel pins/collars, polymer)10 - 20N/mm²-
Maximum Thread (Monomer)R 2inch-
Setting Time (M10 brass bolt/nut, at 23°C)20 - 60sec-
Full Cure Time (Polymer)24hours
Temperature Range (Polymer)-50 - 150°C-

Regulatory & Compliance

Certifications & Compliance
Specification
  • DVGW approved (DIN EN 751-1). Not for gas Installation according to DVGW-TRGI-2008. Not approved for domestic gas installation in Germany.
  • NSF S2 registered (No: 161204). This product is acceptable for use as sealant in food processing facilities. It must only be used in a manner as to ensure it will have neither direct nor indirect contact with food or potable water.
  • German drinking water approval: Conformity of formulation with the reference formulation of the German Environmental Agency.

Technical Details & Test Data

Technical Information

Viscosity vs Shear Rate

 

Cyberbond CB SH 27 - Technical Information

 

 

Adhesive Strength
Substrate Nm
Steel 10 to 20
Stainless steel V2A 10 to 20
Galvanized steel 10 to 20
Brass 18 to 26

 

Breakloose Torque

Cyberbond CB SH 27 - Technical Information - 1

 

Solvent Resistance

Solvent Example Resistance
alcohols ethanol, methanol, isopropyl alcohol +
esters ethylacetate, benzoic benzyl ester, +
other liquids water, freon, diesel oil +
other liquids ammonium hydroxide, bromine, hydrobromic acid, lithium hydroxid, perchloric acid, potassium hydroxide -
gasses acetylene, argon, butane, ethane,nitrogen +
gasses ammonia, freon gas, oxygen (pure and /or oxygen rich systems), chlorine -

 

Measurement of Viscosity

Viscosity describes the flow-ability of a liquid. Cyberbond measures the viscosity of the products by means of the cone/plate method: the liquid is applied on a panel and a defined cone presses the liquid together and rotates. You differentiate between a Newtonian and a thixotropic liquid. In terms of a Newtonian liquid you will get a relative constant viscosity graph in dependence of the rotary speed of the cone. In terms of thixotropic liquids the product becomes more liquid (down to its base viscosity) the faster the cone rotates. The viscosity is measured in mPa*s

Safety & Health

Safety Information
  • Keep the workplace clean and use in well ventilated areas only. Installll suitable exhaust system at the workplace.
  • Wear suitable safety glasses and gloves.

Packaging & Availability

Regional Availability
  • Africa
  • Europe (Excluding Russia)
  • India
  • Middle East

Storage & Handling

Shelf Life
12 Months (at 20°C in unopened bottles, Monomer)
Storage Conditions

Store products in a cold and dark place. Optimal storage temperature range is between 8°C - 21°C.