Products

ProSpec® BlendCrete® is a fast-setting, single-component, polymer-modified patching compound made with calcium aluminate cement, ideal for repairing concrete and masonry in horizontal, vertical, and overhead applications.

Foster® 40-20C Protective Coating offers a resilient and decorative finish that accommodates movement without creating spaces for bacteria to lodge. This cost-effective coating is resistant to various industrial chemicals and provides long-lasting protection. It is suitable for application on walls, ceilings, pipes, both interior and exterior surfaces of HVAC duct systems, and in areas where effective controls are required.

Magik 555 LV is a specially developed, low VOC, air-drying contact adhesive that excels in bonding seams and butt joints of pipes and sheet insulation. It can also be used to bond sheet insulation to flat or curved metal surfaces.

Foster® C.I. Mastic® 60-26 is a resilient and durable asphalt cutback mastic with high solids content. It serves as an effective vapor retarder due to its low vapor permeance, making it an excellent surface coating for outdoor applications, particularly for low-temperature insulation.

H.B. Fuller 173 is a general-purpose hydraulic sealant suitable for fittings up to ¾ inch in diameter. It is ideal for fine threads and is a low viscosity, medium-strength thread and pipe sealant. It has a low viscosity for improved flow and coverage, and it offers excellent chemical and vibration resistance.

GorillaPro® AS10 is a single-component, anaerobic pipe sealant with PTFE. It is designed for locking and sealing metal pipes and fittings, providing immediate low-pressure sealing performance on tapered pipe threads. It is an anaerobic cure adhesive that protects critical components by preventing liquid and gas leaks from escaping threaded or flanged fittings. By using GorillaPro® AS10, one can avoid catastrophic equipment failure, as it effectively prevents leaks and minimizes downtime.

Cilbond® 49SF is a single-component bonding agent specifically designed for hot-cure applications (more than 160°F/70°C) with castable polyurethane elastomers and injection-molded TPU systems. It features a pigmented red color and is widely recognized as the industry benchmark for high-performance urethane bonding. Cilbond® 49SF has been developed to bond effectively with various materials, including metals, polyesters, polyamides, epoxies, and fiberglass reinforced plastics. It is highly recommended by leading urethane manufacturers and offers impressive in-service heat resistance of up to 265°F/130˚C (or up to 350°F/180˚C when used in combination with the Cilcure® B additive).

Cyberbond CB SH 22 is an anaerobic adhesive that is specifically designed for use as a sealant. It has a low strength and high viscosity formulation, making it ideal for applications that require a reliable seal that is also easy to dismantle. It is particularly well-suited for use as a pipe and flange sealant, as well as an instant gasket.

H.B. Fuller 7567 is a single-component anaerobic pipe sealant with PTFE. It is designed for the locking and sealing of metal pipes and fittings. This product provides immediate low-pressure sealing performance on tapered pipe threads. It has gel viscosity for excellent gap filling, reduces friction during assembly, and prevents rust and corrosion.

H.B. Fuller 145 is a one-component liquid sealant specifically designed for locking and sealing high-pressure fluid power systems. It is an anaerobic sealant that can be heat-cured as a secondary measure. This sealant has a controlled flow viscosity and will not cause filter contamination.

Millennium Hurricane Force® Universal Sealer Extreme is a fast-setting, solvent-free, multi-use universal sealer that becomes waterproof within minutes of application. The formula is essentially VOC-free, making it approved for use in regulated markets such as California and OTC states. Millennium Hurricane Force® Universal Sealer Extreme is a two-component product that cures via a chemical cross-linking mechanism. Unlike one-part moisture-cure sealants, Universal Sealer Extreme will cure consistently and quickly throughout, rather than simply skinning over and remaining tacky on the inside.

Foster® Bridging Encapsulant 32-32 is a single-component, water-based elastomeric product with pigmentation. It is designed for interior use over asbestos-containing materials (ACM) of fibrous and cementitious types. This product can be easily applied via spray, and once cured, it forms a resilient, durable elastomeric film over the ACM. This film effectively delays the release of friable asbestos fibers.

Foster® Full Defense™ Fungicidal Protective Coating 40-25 is designed to eliminate any remaining mold and mildew after pre-cleaning contaminated surfaces. It also provides protection to various building materials, including unfinished wood, drywall, oriented strand board, metal, masonry, and more, safeguarding them from fungal growth.

Childers® Chil-Joint® CP-70 Sealant is a cost-effective joint sealant designed for use in various insulation systems, including low-temperature, dual-temperature, and some high-temperature applications. This sealant is non-shrinking and non-drying, ensuring long-lasting performance. It is also available in caulking tubes for application with hand or power caulking guns.

Magik 3036 is an UL Classified, low VOC, water-based, flexible fire-resistant coating for duct insulation. It is washable, tough, and abrasion-resistant, and acts as a lagging and lap adhesive for canvas and glass reinforcing cloth. With excellent flow properties, Magik 3036 provides smooth brushing characteristics for better coverage and uniformly coated surfaces. It can be used both indoors and outdoors, including in high humidity environments.