Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Benefits
- Good aging resistance
- Very low water vapour transmission rate and gas permeability
- High UV resistance
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Application Information
Primary sealant for insulating glass
- Application Information
Suitable Substrates
- Various galvanized steels
- Various stainless steel alloys
- Various aluminum alloys
- Various plastic substrates
- Glass
Consistency
- Solid compound, can only be applied at elevated temperatures
Surface Requirements
- Dry
- Clean
- Free of grease
- Free of dust
Application Equipment
- Heated butyl extruder
- Drum melting system
- Preperation and Processing
Due to the huge variety of available substrates preliminary testing regarding adhesion and compatibility is strongly recommended
Properties
- Color (Properties)
- Typical Properties
Value Units Test Method / Conditions Density (at 70°F) 8.8 lb/gal DIN EN ISO 2811-1 Gas Permeation Rate (Argon) 0.015 g/(m² d) EN 1279-4 annex D Gas Permeation Rate (Argon) max. 0.001 g/(m²-h) EN 1279-4 annex D Needle Penetration (at 70°F, 10 s, 0.11 lbs) 56 1/10 mm DIN EN 1426 Processing Temperature 230 - 270 °F - Service Temperature - 40 to 180 °F TI 141 Storage Temperature 50 - 90 °F - Volatile Content 0.03 % EN 1279-4 annex H Water Vapor Transmission Rate max. 0.01 g/(m² d) EN 1279-4 annex D
Packaging & Availability
- Regional Availability
- Packaging Information
- Content - 2 lbs - slug
- Content - 5 lbs - slug
- Content - 15 lbs - slug
- Content - 420 lbs - drum
Storage & Handling
- Shelf Life
- 24 months
- Storage Information
GD 115 should be used within the shelf life specified on the packaging. The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature)