Products

ST-30 is a flexible butyl joint sealant designed for sealing precast concrete, manholes, septic tanks, box culverts, concrete pipes, vaults, and vertical panels. It is permanently flexible, tacky, moisture-resistant, and durable against acidic and alkaline environments. Not for use in expansion joints or moving joints. Available in various sizes and shapes, it meets or exceeds ASTM C990 standards for butyl tapes.

Weld Mount AT-3B, the compact solution for securing small wire ties. This product falls under the adhesive equipment consumables and supplies category, offering a seamless way to manage your wiring needs.

H.B. Fuller EV Bond 720 is designed to set quickly and strengthen within 3-4 minutes. Fully moisture-cured material displays excellent high temperature strength, tested up to 120°C. Rapid shipment of bonded parts is possible, as H.B. Fuller EV Bond 720 will not flow or expulse at 120°C, preserving bonded geometry at high temperatures before fully moisture-cured. This patented reactive hot melt moisture curing material is a one component polyurethane, 100% solid adhesive. Excellent adhesion strength is achieved within 10 seconds to 3 minutes after dispensing. This product has aggressive hot tack and cures in the presence of moisture into a tough bond. It works well in bonding various plastics, woods, metals, and primed glass substrates.

GSSI® MH-19 Rubber Sealant Tape is a pressure-sensitive sealant tape extruded onto silicone release paper. MH-19 is widely used in the mobile home, RV, and modular construction industries wherever a watertight seal is critical, such as roof seams, roof-to-sidewall joints, vents, stacks, and gutter mountings.

Weld Mount DHC-375 is a versatile solution for industrial needs. Categorized under adhesive equipment consumables and supplies, this product features a sleek black color. Elevate your operations with the reliability of Weld Mount DHC-375.

Weld Mount DHC-1000 is a versatile solution in the industrial sector. This product, categorized under adhesive equipment consumables and supplies, features a sleek black color. Elevate your industrial operations with the reliability and efficiency of Weld Mount DHC-1000.

Weld Mount SHC-500 is a black single hose/cable clamp. This versatile product, falling under equipment and parts, is part of adhesive equipment consumables. Available as single or double units, these hinged clamps can be mounted using our 1/4" x 20. Which is manufactured from black polypropylene.

Foster® H.I. Mastic® 90-07 is a durable protective weather coating specifically designed for outdoor use over thermal insulation when an economical breathing mastic is needed. This asphalt emulsion product is crack-resistant, even at critical right-angle bends during curing. It exhibits exceptional weathering stability, resulting in a firm and durable surface that withstands acids, alkalies, abrasion, and typical outdoor industrial conditions.

Weld Mount DHC-625 is a versatile solution catering to industrial needs. This product, belonging to the consumables and supplies category of adhesive equipment, showcases a sleek black color. Elevate your industrial processes with the reliability and functionality of Weld Mount DHC-625.

H.B. Fuller Isomelt M is a black-colored sealant suitable for windows and glass surfaces in the building and construction industry. It offers heat resistance and is designed for use in building envelope and roofing applications, particularly in EIFS (Exterior Insulation and Finishing Systems) and insulation projects.

Adcobond AT-5 is a very high-bonding-strength acrylic tape with a foam core designed for superior bonding between various substrates. It features a uniform, high-tack, acrylic adhesive on both surfaces and effectively bonds to clean, dry, oil-free substrates. It's a pressure-sensitive tape suitable for a wide range of applications.

HydroArmor® 8800BL is a sprayable water-based coating designed to quickly build a high level of water resistance. It is formulated to provide excellent adhesion to stainless steel, wood, and composite decking and to provide very good corrosion protection when applied with a wet film thickness as low as 0.020". This coating can be easily sprayed onto exposed underbody areas, and wet film builds of 0.040" can be applied without runs, drips, or sags.

Millennium Hurricane Force® 1-Part Membrane Adhesive is a highly elastomeric, one-part asphalt-modified urethane adhesive that is solvent-free and does not require mixing. The VOC content of the adhesive is less than 250 g/L. Millennium Hurricane Force® 1-Part Flashing Adhesive is approved for use in VOC regulated markets such as California and the OTC States.

ST-3001 Standard Butyl Pad are formulated from a unique blend of butyl rubber specifically designed for the installation of road markers, reflectors, and delineators. ST-3001 Standard Butyl Pad remain permanently flexible which helps to prevent the road marker from breaking away from the surface when sudden impact is applied. Although this product is marketed as a temporary installation option, it has proven to remain in place for many years even outlasting the life of most markers.

H.B. Fuller EV Seal 200 is an MS polymer system that can be used for 1K moisture curing or a 2K accelerated cure option. Fast skin-over and green strength at room temperature. The product shows superb mechanical properties and provides unparalleled levels of sealing and resistance. Suitable for adhesion to a wide range of substrates like plastics, metals, and composite materials.

FulaFlex™ 650FC is a high-performance, 1-part hybrid moisture-curing sealant and adhesive that forms a tough, elastic, and weatherproof seal. It’s a mid-high modulus product suitable for trafficable areas like concrete saw cuts in commercial buildings and various bonding applications.

Adcobond SCT-100 is a double-sided tape featuring a synthetic elastomer-based adhesive/sealant with a non-woven reinforcement layer. It maintains flexibility and easily conforms to irregular surfaces. This tape has a high tack level, forming strong bonds with various substrates such as polyethylene, EVA, EPDM, and automotive paint systems. Moreover, it establishes a permanent seal against moisture, dust, and air intrusion. The reinforcement layer adds strength and resistance to deformation.

Childers® Chil-Pruf™ CP-24 Insulation Coating is a reliable asphalt-based cutback coating reinforced with fibers. It is designed as a vapor retarder coating, typically applied over insulation materials on piping and equipment that operate at low to moderately high temperatures. When applied correctly, Chil-Pruf™ offers protection against atmospheric corrosives, chemical dust, fumes, fogs, and moisture.