Products

ST-3001 Butyl Pads are formulated from a unique blend of butyl rubber specifically designed for the installation of road markers, reflectors, and delineators. ST-3001 Butyl Pads remain permanently flexible which helps to prevent the road marker from breaking away from the surface when sudden impact is applied. Although this product is marketed as a temporary installation option, it has proven to remain in place for many years even outlasting the life of most markers.

ProSpec® Slab Bedding Grout Rapid is an ultra-fast setting, non-shrink, high compressive strength grout designed for placing precast concrete slabs. It is non-metallic and provides strong load-bearing support.

ProSpec® High Strength Precision Grout is a ready-to-use, specially formulated grout that offers high strength and excellent flowability for precision applications.

ProSpec® Slab Dowel Grout is a non-shrink, high compressive strength grout, non-metallic, ideal for placing prefabricated concrete pavements and structural grouting applications.

ProSpec® Premium Patch 100 is a fast-setting, fiber-reinforced, high-strength cement-based repair mortar that provides quick early strength gain, minimizing downtime for repair applications.

ProSpec® BlendCrete® is a fast-setting, single-component, polymer-modified patching compound made with calcium aluminate cement, ideal for repairing concrete and masonry in horizontal, vertical, and overhead applications.

ProSpec® Premium Patch 200 is a rapid-setting, fiber-reinforced, high-strength cement mortar, polymer-modified for durable concrete repair and overlay applications.

UltraShield EMB 25 is a single-component, flexible, cold-applied, bitumen-modified acrylic-based waterproofing membrane. It is specially designed from a blend of special resin and rubber, reinforced with water-repelling fillers, mineral stabilizers, and a gelling agent. UltraShield EMB 25 is a highly elastic product that cures to a rubber-like membrane capable of withstanding severe expansion, contraction, and deck movements. It is highly resistant to oxidation, UV light, and ozone due to the unique additives used in its formulation, ensuring it does not crack.

Adcobond D18-221 is a range of high-performance, black, butyl, pressure-sensitive tapes. These tapes are extruded to conform to either round or flat profiles, adhering to specified dimensional tolerances. Unless otherwise specified, the material is protected on one side with a removable release liner.

H.B. Fuller MP54750 is a low-viscosity polyamine epoxy designed for bonding metals and plastics. It is also ideal for highway and bridge deck repairs, potting, casting, encapsulation, synthetic flooring systems, maintenance coatings, and tank and pipe linings. This product provides good chemical, corrosion, and water resistance.

UltraShield AC 10 is a single-component, flexible, acrylic-based waterproofing and protective coating. It is designed to provide a tough barrier against weathering agents and UV, and it also functions as an anti-carbonation coating. Upon full cure, the coating forms a tough, resilient, yet flexible barrier.

UltraShield AC 14 is a premium quality, single-component, flexible, acrylic-based waterproofing and protective coating ideal for roof and wet area applications. It is designed to provide a tough barrier against weathering agents and UV, and it also functions as an anti-carbonation coating. Upon full cure, the coating forms a tough, resilient, yet flexible barrier.

FulaFlex™ 650FC is a high-performance, 1-part hybrid moisture-curing sealant and adhesive that forms a tough, elastic, and weatherproof seal. It’s a mid-high modulus product suitable for trafficable areas like concrete saw cuts in commercial buildings and various bonding applications.

H.B. Fuller PD0725P is an acrylic adhesive that is surfactant stabilized and serves as a cement modifier. H.B. Fuller PD0725P improves adhesion, flexibility, and water resistance. H.B. Fuller PD0725P is commonly used as a cement modifier in the construction industry.

Enifix 333 is a high-quality, one-component, multipurpose contact adhesive based on polychloroprene rubber with special tackifiers and additives. It is ideal for numerous repair and construction jobs requiring immediate bonding. Enifix 333 is specially developed to be compatible with most substrates and exhibits excellent film-forming properties, providing uniform bonding to many surfaces.