Products

HS Butyl Fleeceband 0318 is a butyl tape laminated with a non-woven polyester or polypropylene fleece. It is designed for sealing floor-to-wall joints and around drains in wetrooms, filling cracks prior to plastering, and sound-deadening applications, offering flexibility and conformability for easy application. This ready-to-use tape provides an effective sealing solution for various construction and repair needs.

HS Butyl 0303 is a general-purpose butyl tape used for sealing applications. It is suitable for sealing lap joints in roofing and cladding systems, duct flanges in HVAC systems, compression joints and seams, and caravans, offering excellent adhesion to multiple substrates. The tape is conformable, easy to use, and designed as a ready-to-use product for various sealing needs.

Hydra FAST-EN® DC-12465 spray system is a two-part adhesive designed to bond open-cell urethane foams, including high-stress geometries. It's also suitable for bonding open- or closed-cell foams, woods, plastics, fabrics, and some metals to porous or non-porous surfaces. With an aggressive early tactic and no solvents, it's user-friendly and addresses many of the common problems of other two-part systems. It's an alternative for applications where solvent-based systems pose concerns for health or environmental reasons.

H.B. Fuller AT-1 very high-bond strength acrylic tape is a pressure-sensitive, water-clear, solid acrylic tape system. It is designed to provide a superior bond between a wide variety of substrates. The tape possesses a uniform, high-tack acrylic adhesive on both surfaces and will bond to most clean, dry, oil-free substrates.

Tonsan® TS850 Polyurethane Sealant is a two-component reactive chemistry 2K PU adhesive. It can cure rapidly when heated and is specifically designed for bonding GFRP and CFRP materials with high strength. This sealant is commonly used for bonding SMC parts such as bumpers, high roofs, door panels, and other components in specialty vehicles, including trucks, busses, and commercial vehicles.

Tonsan® TS820L is an anaerobic adhesive known for its low odor and exceptional shear and peel strength. It is specifically designed for structural bonding applications. This adhesive is suitable for bonding metals and ceramics quickly and with minimal surface preparation, making it an ideal choice for electric vehicle applications.

SILAPRENE® DC12895 Sealant is an exceptional one-part product that combines ease of application, versatility of use, high ultimate strength, permanent bonds, and long service life. It is a high quality, elastomeric sealant that provides superior adhesion to a variety of surfaces.

SILAPRENE® DC 12149 is a solvent-based, pressure-sensitive adhesive with an amber color. It is suitable for bonding paper, card stock, foils, rigid plastics, and polyolefin foams and films. It exhibits good resistance to creep and cold flow while providing high tack strength to most substrates and excellent peel adhesion.

H.B. Fuller EY2562 is designed to fill the need for a strong, pourable, and lightweight filler for honeycomb core panels. It can be used to pot fasteners or as an edge closeout after the panel is trimmed to contour. It is fire retardant, resistant to long exposure to 350°F, and cures at room temperature in thicknesses in excess of one inch.

SILAPRENE® DC 12742 is a general-purpose adhesive designed to bond a variety of substrates such as PVC film, sheet, and foam, thermoplastics, phenolics, concrete, and elastomers. This light amber, solvent-based adhesive forms a tough and flexible bond with a long open time when needed.

H.B. Fuller AT-3 very high-bond strength acrylic tape is a pressure-sensitive, structural-grade, solid acrylic tape system. It is designed to provide a superior bond between a wide variety of substrates. The tape possesses a uniform, high-tack acrylic adhesive on both surfaces with an integral core of solid acrylic polymer that will bond to most clean, dry, oil-free substrates.

H.B. Fuller UR4515G is a two-component polyurethane adhesive specifically designed for the structural bonding of metals and plastics. This adhesive offers high lap shear strength, good thixotropy for easy application, and a good work life. It has a 1:1 mix ratio by volume, which is intended for easy use with automated dispensing systems.

HydroArmor® 8800BL is a sprayable water-based coating designed to quickly build a high level of water resistance. It is formulated to provide excellent adhesion to stainless steel, wood, and composite decking and to provide very good corrosion protection when applied with a wet film thickness as low as 0.020". This coating can be easily sprayed onto exposed underbody areas, and wet film builds of 0.040" can be applied without runs, drips, or sags.

Körapop 235 is a permanently elastic adhesive. It can also be used as a 2K version with accelerator paste for specific applications. This adhesive is primarily used for assembly bonding and interior finishing in various industries, such as trailer and commercial vehicle manufacturing.

Körapop 225 is a versatile adhesive and sealant that utilizes silane-modified polymer chemistry. It is a one-component, non-sag product that offers exceptional strength and high flexibility. The product's exceptional UV, weather, and aging resistance make it ideal for a range of applications. Additionally, it is paintable and provides excellent adhesion to many substrates without requiring a primer.