Products

Q-Set™ 250-750 represents a two-part polyurethane composite backfill renowned for its waterproof properties. This innovative solution efficiently expands to occupy the peripheral void surrounding a satellite dish post within the hole. By creating a robust composite material, it provides substantial structural support to the post, ensuring its stability and upright positioning are maintained. This advanced polyurethane formulation not only offers water resistance but also contributes to the overall durability and longevity of satellite installations, making it a reliable choice for backfill applications.

Ipacoll™ LP 2718 is a water-based dispersion adhesive with a high initial tack and good adhesion to difficult surfaces. It provides excellent adhesion on hard-to-bond surfaces and good machinability. This adhesive is designed for laminating cardboard to paper or to films such as PVC, OPP, POF, and treated PP and PE films.

Swift®therm 3054 is a hot melt adhesive with good adhesion to filter media, reduced shrinkage, and good flexibility. It has been developed for the manufacture of air filters as a pleat separator. Filter media is a suitable substrate for this product.

Clean Melt® PHC 7688 is a hot melt adhesive with multiple benefits, including suitability for use with fast machines, good adhesion on standard packaging, a wide service temperature range, economical use, very good heat stability, and low odor. This product is typically used for bonding paper, cartons, and corrugated boards with conventional surfaces.

Clarity® 4170 is a hot melt adhesive that has been developed for the labeling of glass-, metal-, and plastic (PVC, PE, PET, PP, etc.) containers with PP or PE labels. Especially suitable for labeling CSD PET bottles that may expand significantly. It provides high bonding strength on cold and warm containers.

ElastiSeal® WSS-2M is a high-viscosity, non-drying, butyl-based sealer used for automotive weather strips. It is designed to prevent rust and seal doors, trunks, and liftgate flanges from air and moisture penetration. This pumpable sealer does not harden or gel over time, even at extreme temperatures.

Clarity® 4164 is a hot melt adhesive that has been developed to label all types of containers (glass, metal, and plastic) with pre-cut paper labels. It can offer strong fiber tearing of paper labels on warm and cold containers (down to +4°C storage).

Hydra FAST-EN® Bond Plus® 20277 is a water-borne, fugitive adhesive with a low viscosity and high solids formulation for pattern and extrusion applications. Specially formulated for fast drying and clean machining, it has excellent lay-flat, even on lightweight stock. This product boasts non-blocking, unsurpassed humidity resistance, along with excellent adhesion to rag stocks.

Swift®therm 9054 is a hot melt adhesive with a long open time, good spray film, and flexible, moisture- and cold-resistant bondings. It is suitable for bonding various plastic materials to wood as well as textiles, felts, foams, paper, cardboard, and other materials.

Hydra FAST-EN® DC-20852 is a specific type of water-based adhesive that is designed for bonding open-cell urethane foams. It is important to note that DC-20852 is only one component of a two-component adhesive system, and it requires the use of an activator known as DC-12239 (Part B).

Flexel™ TPF4050 is a heat-activated adhesive film designed to bond ABS, PC, nylon, pre-treated olefins, and various textiles, including artificial and genuine leather. The film is supplied on siliconized paper and offers excellent adhesion to plastics and textiles. Its easy-to-use film form simplifies the bonding process.

Hydra FAST-EN® DC-12623 is a one-part sprayable contact adhesive that is designed to bond various porous surfaces, especially open-cell polyurethane foams. The system is low-cost, highly stable, user-friendly, and allows for quick mating of surfaces after adhesive application. Hydra FAST-EN® DC-12623 provides good bonds in lay-flat scenarios and can be used with higher-strength urethane foams. Sprayed materials can be wet-mated (for lay-flat) or dry-mated (for stress scenarios). The final bonds are soft and supple. Other applications where the use of solvent-based, flammable, and non-flammable systems is a concern for either health or environmental reasons may also be suitable candidates for the use of this product.

Flexel™ EM9002 is a heat-activated adhesive film designed to bond plastic substrates such as ABS, PC, pre-treated olefins, textiles, artificial leather, and genuine leather at low temperatures. This adhesive film exhibits high fracture toughness, peel strength, and shear strength while maintaining flexibility. It offers excellent adhesion to plastics and textiles.

EternaBond® FGT BC-1241 is a highly compressible PVC foam core encapsulated with a high-tack butyl adhesive/sealant. This flexible material easily conforms to corners and irregular contours. It provides a secure seal that helps protect against water penetration and prevents corrosion and moisture damage. Furthermore, it eliminates the need for cap sealing by gasketing, thereby improving quality.

HydroArmor® 8800BL is a sprayable water-based coating designed to quickly build a high level of water resistance. It is formulated to provide excellent adhesion to stainless steel, wood, and composite decking and to provide very good corrosion protection when applied with a wet film thickness as low as 0.020". This coating can be easily sprayed onto exposed underbody areas, and wet film builds of 0.040" can be applied without runs, drips, or sags.