Products

H.B. Fuller 7155-3 heat-expandable sealer is a die-cut, rubber-based sealer that expands with the application of heat to form a flexible, closed-cell foam. It has excellent adhesion to galvanized and primed steel and is recommended for use between metal components to create a watertight seal.

Tonsan® TS856 is a kind of 2K PU structural adhesive, it is mainly used for composite materials bonding and can be cured at room temperature or can be accelerated with heating, after curing it has excellent adhesion, impact resistance, water resistance, electric isolation, and corrosion resistance properties.

EternaBond® FGT BC-1101 is a highly compressible PVC foam core encapsulated with a high-tack butyl adhesive/sealant. This flexible material easily conforms to corners and irregular contours. It provides a secure seal that helps protect against water penetration and prevents corrosion and moisture damage. Furthermore, it eliminates the need for cap sealing by gasketing, thereby improving quality.

GorillaPro® CA100 is a single-component, low- to medium-viscosity instant adhesive. It is ideal for general-purpose applications on metals, rubbers, or plastics. It is recommended for use as a cyanoacrylate adhesive. Additionally, it has been tested to ISO 10993-5 standards, ensuring its suitability for use in medical device applications.

Adcobond D18-221 is a range of high-performance, black, butyl, pressure-sensitive tapes. These tapes are extruded to conform to either round or flat profiles, adhering to specified dimensional tolerances. Unless otherwise specified, the material is protected on one side with a removable release liner.

GorillaPro® CA500RT is a black, medium-viscosity instant adhesive that is rubber-toughened with ethyl. It offers superior shock and thermal resistance when bonding rubbers, metals, and plastics, even in harsh environments. This adhesive demonstrates excellent strength and flexibility on a variety of substrates, making it a reliable choice for various applications.

H.B. Fuller SIGEL is a surface-insensitive cyanoacrylate adhesive. This high-viscosity gel is used in applications that require faster cure speeds on parts that are dry and on parts that may be acidic. The SI series bonds a wide range of similar and dissimilar surfaces. This series provides exceptional performance in a wide range of applications.

Tonsan® MT3710 is a two-component anaerobic adhesive designed for room temperature curing. Its specialty lies in bonding motor silicon steel sheets. With medium viscosity, it rapidly cures at room temperature when used in conjunction with the MT3300 primer, resulting in high-strength bonds after curing. This adhesive is tailored to meet the specific performance demands of motor operation.

EternaBond® Foam Gasket Tape (FGT) is a PVC foam core with a high-tack butyl adhesive that provides a flexible gasketing material to seal against water penetration, corrosion, and moisture damage. This game-changing hybrid solution features multiple sealing technologies in one time-saving step. The highly compressible foam core conforms easily to corners and irregular contours, filling oversized gaps and bonding to both the body and the frame. EternaBond® Foam Gasket Tape (FGT) from H.B. Fuller creates a barrier to prevent leakage without requiring a secondary seal, making it a reliable and convenient choice.

GorillaPro® CA30 is a low-viscosity, rapid-curing instant adhesive. It is specifically designed to bond a wide range of similar and dissimilar materials. In most applications, it achieves handling strength within 5 to 10 seconds. It can also be post-applied if necessary.

H.B. Fuller 4193HD pressure-sensitive mastic patch is usually laminated to a plastic film or foil to facilitate installation. It can be die-cut into simple or complex shapes as required by the application. When the appropriate film or foil is used, this material can be applied before paint with no negative impact during bake cycles.

Cyberbond CB 2241 is a partly flexible cyanoacrylate, also known as rubber tough. It allows dynamic and temperature-loaded bonds and guarantees certain shock-absorbing properties. This grade is also excellent for combination bondings like metal to rubber or metal to plastic. CB 2241 is a black grade with an outstanding performance. Dispensing via, e.g., LINOP dispensing equipment is limited.

H.B. Fuller RP100 is a one-component, medium-viscosity, rapid-curing cyanoacrylate adhesive. It is designed to bond a wide range of similar and dissimilar materials effectively. With a fast handling strength of approximately 10 seconds, it provides quick results and is suitable for general-purpose bonding applications.

GorillaPro® CA120SI instant adhesives are one-component, solvent-free adhesives that set very fast. These adhesives bond within seconds when in the presence of a weak base, such as surface moisture, and exhibit strong adhesion to a wide range of substrates. GorillaPro® CA120SI is designed for optimal adhesion in various applications and offers a maximum shelf life.

EternaBond® FGT BC-1121 is a highly compressible PVC foam core encapsulated with a high-tack butyl adhesive/sealant. This flexible material easily conforms to corners and irregular contours. It provides a secure seal that helps protect against water penetration and prevents corrosion and moisture damage. Furthermore, it eliminates the need for cap sealing by gasketing, thereby improving quality.