Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Cure Method
- General Instructions
- For optimum results parts should be clean and free from any contamination on the bonding surface. If parts do not mate flush together use a higher viscosity product to compensate for the gap.
- Factors Affecting Cure Speed Include: GAP: Thin bond line results in faster cure speed. Larger gaps will lengthen cure speed. HUMIDITY: Cure and fixture times can be influenced by the humidity conditions at the time of assembly.
- The higher the RH the faster cure and fixture times will be. Fixture time data based on our testing is conducted at 50% relative humidity.
Properties
- Color
- Physical Form
- Appearance
- Clear high viscosity gel
- Cured Properties
- Uncured Properties
Value | Units | Test Method / Conditions | |
Shear Strength (Steel) | min. 2100 | psi | ISO 4587 |
Shear Strength (Aluminum) | min. 1750 | psi | ISO 4587 |
Shear Strength (Neoprene) | min. 750 | psi | ISO 4587 |
Shear Strength (Acrylonitrile Butadiene Styrene) | min. 900 | psi | ISO 4587 |
Shear Strength (Polyvinyl Chloride) | min. 900 | psi | ISO 4587 |
Shear Strength (Polycarbonate) | min. 900 | psi | ISO 4587 |
Shear Strength (Phenolic) | min. 850 | psi | ISO 4587 |
Tensile Strength | min. 1800 | psi | ISO 6922 |
Damp Heat Aging (Strength on PC after 500 hrs, at 40°C, 95% RH) | 100.0 | % | - |
Dielectric Constant (at 1kHz) | 2 - 3.5 | - | ASTM D150 |
Dissipation Factor (at 1kHz) | max. 0.02 | - | ASTM D150 |
Volume Resistivity | (2 - 10) x 10¹⁵ | Ω.cm | ASTM D257 |
Value | Units | Test Method / Conditions | |
Viscosity | Gel | - | - |
Specific Gravity | 1.05 | - | - |
Set Time (Steel) | max. 20 | s | - |
Set Time (Aluminum) | max. 20 | s | - |
Set Time (Neoprene) | max. 5 | s | - |
Set Time (Acrylonitrile Butadiene Styrene) | max. 10 | s | - |
Set Time (Polyvinyl Chloride) | max. 10 | s | - |
Set Time (Polycarbonate) | max. 10 | s | - |
Set Time (Phenolic) | max. 10 | s | - |
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage Conditions
- Store product in unopened containers, out of direct sunlight, in a dry location.
- Material should be stored at or below 22°C.
- For extended shelf life unopened containers of the product may be refrigerated.