Products

Tuskbond XPR0 FR - 500ml Aerosol is a fire-rated multipurpose sprayable contact adhesive ideal for bonding a wide variety of substrates. XPR0 provides incredible grab, high bond strength and excellent heat resistance. It is easy to apply and combines a long open time with a fast drying time. XPR0’s unique solvent system provides high performance with lower health hazards compared to traditional Non-Chlorinated alternatives. ● https://youtu.be/-VOa8H8if_s?si=FHJknwsAOp4M6HjJ

BX-043 Concrete Joint Sealant / Waterstop Tape is a flexible tape that seals concrete construction joints by expanding upon moisture contact. Made from a blend of butyl rubber polymers and bentonite clay, it offers superior expansion and sealing in concrete joints.

H.B. Fuller MP5405 is a two-part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough, semi-rigid material with a free-flowing viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was especially formulated to have a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. Handling strength is normally achieved at room temperature within 3 - 5 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Rakoll® 4933 is an adhesive that provides strong and reliable bonding while contributing to lower hazardous emissions. H.B. Fuller recognizes the increasing importance of sustainability and the need for stricter certification of manufactured woodworking materials. Rakoll 4933 has been specifically designed to meet the toughest emission regulations, ensuring compliance both now and in the future.

Elvace® CPS-720 is a high-performance adhesive solution designed to provide strong, durable bonds in industrial applications. It is commonly used in automotive, aerospace, and packaging industries, where superior bonding strength is required for long-term success. This adhesive delivers exceptional performance even in demanding conditions, ensuring reliable and lasting results.

H.B. Fuller HM1597 is a versatile adhesive designed for various applications. It is compatible with composite substrates, making it suitable for a wide range of uses. In the building and construction industry, it finds its application in wood flooring, providing excellent adhesion to ensure durable and reliable bonding. Additionally, in the healthcare and pharmaceutical sectors, it is utilized in disposable nonwovens and disposable ware applications.

Swift®lock 2U340 is a single-component, fully reactive hot melt adhesive that cross-links through a chemical reaction with moisture found in the surrounding air and substrates, to produce a thermoset adhesive. It was specifically formulated for difficult to bond plastics, such as ABS and vinyl, to a wide variety of metals. It was designed to provide a good balance of properties. The rheology of the product gives excellent release from roll coaters and no stringing of adhesive. The open time of three minutes is sufficient for assembly of a wide variety of applications. Green strength development of greater than 50 psi in 15 seconds holds difficult substrates together after combining. Long term aging studies show excellent retention of adhesive properties.

Rakoll® GXL 4 is a water-based PVA-based emulsion adhesive known for its high bonding strength. It is specifically designed for flat lamination applications, making it suitable for use in engineered wood flooring, parquet, window frames, and fenestration. The adhesive provides strong and durable bonds, ensuring reliable performance in these applications.

Copro® SP-462 is a versatile adhesive offering strong bonding for automotive, aerospace, and packaging industries. It provides reliable adhesion and long-lasting performance under demanding conditions. This adhesive is designed to withstand temperature extremes, chemicals, and moisture, ensuring consistent bonding strength in challenging environments. Copro® SP-462 is ideal for applications that require durable, high-performance bonds in industries where reliability is essential.

Rakoll® GXL 3 is an easy-to-apply adhesive that is suitable for many processing conditions and provides very strong bonding. As a PVAc adhesive, it meets the requirements of class D3 as a one-component product. When mixed with Rakoll® GXL-3-Härter, it meets the requirements for the D4 standard DIN EN 204.

Rakoll® 4654 is a polyurethane-based reactive hot melt adhesive specifically designed for profile wrapping of wood and wood-based substrates. This adhesive fulfills the application requirements for easy processability and high-quality finished products. It exhibits high initial strength and a fast setting, making it ideal for bonding difficult substrates.

Rapidex® 4001-149 is a high-quality polyurethane hot melt adhesive known for its excellent green strength, aggressive hot tack, and good coater stability. It is specifically designed for engineered wood flooring manufacturing and is well-suited for bonding engineered wood flooring and parquet.

Swift®tak 9965 is a water-based synthetic resin known for its excellent water and heat resistance. It offers reliable bond performance across a broad temperature range and meets the ANSI/HPVA EF 2012 standard. This adhesive is specifically designed for engineered wood flooring manufacturing and is well-suited for bonding engineered wood flooring and parquet.

FLX 577 is a very low emission, low odor, premium quality, dispersion adhesive designed for laying of various types of vinyl panels/sheets, rubber sheets & various other substrates. FLX 577 is based on a very special type of synthetic resin, with very high-performance additives, fine grade mineral fillers and tackifier.