Products

Tuskbond Tack200 - 22L Canister is a high solids, tacky, spray-applied adhesive, developed for holding carpet tiles and other flooring products to a variety of subfloors. Tack200 boasts a high coverage, designed as a one-way stick applied directly to the floor. ● https://youtu.be/fjaGGvloEk4?si=pxqbBIhw0yp1FUvt

Millennium PG-1 Pump Grade (Low Viscosity Insulation) Adhesive is a two-component, essentially VOC-free, all-purpose, low-rise, polyurethane foamable adhesive that contains no solvents and sets in minutes. The application process is quick and easy, resulting in significant labor savings for the contractor. Millennium PG-1 Pump Grade Adhesive is dispensed through the Patented Millennium Cyclone Low Pressure Pump Cart* (by Garlock) or an approved low pressure pump cart that equally mixes Part 1 and Part 2 of the adhesive, providing a quality, consistent application each time.

Intrafol™ 1226 is a solvent-based primer specifically formulated for ABS edges. It is free from NEP, NMP, toluene, and THF. This primer offers good machinability and provides a homogeneous application. It is primarily used for adhesion promotion in edgebands and foils within the woodworking industry.

Enifix 350 is a high-performance, one-component contact adhesive based on polychloroprene rubber with special tackifiers and additives. It is specially developed to be compatible with most substrates and exhibits excellent film-forming properties, providing uniform bonding to many surfaces.

Rapidex® 4001 is a reactive-chemistry PUR hot melt adhesive that excels in various aspects. It provides excellent green strength, aggressive hot tack, and good coater stability. This adhesive is commonly utilized in door manufacturing applications within the wood and composites market. One notable advantage of Rapidex® 4001 is its forgiving viscosity profile during application, which results in reduced scrape compared to typical PUR hot melts that are not specifically formulated for EWF (edgebanding, wrapping, and facing) lamination.

Rakoll® 5010 is a polyurethane-based hot melt adhesive that is free from hazardous labeling due to its containing less than 0.1% monomer isocyanate. This makes it an environmentally friendly choice for the workplace, along with providing high initial strength and versatility. It is commonly used for flat lamination of decorative papers, foils, and veneers, as well as HPL and CPL. It is also utilized in the manufacturing of wood furniture, flooring, and doors.

Rakoll® 4656 is a versatile reactive hot melt adhesive designed for a wide temperature range and thick foils with a higher reset force. It offers excellent versatility and is well-suited for applications in panel lamination and wrapping of decorative surfaces, particularly in the furniture industry.

H.B. Fuller XR2859UB is a water-based synthetic resin adhesive that bonds difficult substrates. H.B. Fuller XR2859UB has UL10C Fire Rating (including HPL) and WDMA (IS-1A) certifications. H.B. Fuller XR2859UB is used for door lamination and cold and hot press applications.

Rakoll® RK8490 is a water-based polyvinyl acetate adhesive with a medium-long closed assembly time. It has UL10C Fire Rating (including HPL) and WDMA (IS-1A) certifications. It is used for door lamination and cold and hot press applications in the wood and composites market.

Swift®tak 48005 is a medium-viscosity laminating adhesive with excellent flow properties and fast wet tack, making it ideal for use with high-speed equipment. This adhesive is particularly effective for edge-wrapping applications on many substrates. Very effective for edge-wrapping applications on gypsum pane.

Swift®bond 9738 is a one-part reactive chemistry urethane adhesive designed specifically for door manufacturing applications within the wood and composites markets. This adhesive provides excellent flow and adhesion to a wide range of substrates. It offers solutions for various press times, ranging from slow to fast. Additionally, tinted color options are available to enhance process visibility during application.

Rakoll® GXL-31 is a high-quality water-based PVAc adhesive known for its compliance with DIN EN 204 D3 standards, providing excellent water resistance and heat resistance. It is widely utilized in wood assembly as well as HPL and CPL joint applications for furniture components.

H.B. Fuller HL9691 reactive hot-melt adhesive was created especially for summer applications and is renowned for its exceptional initial strength. For the installation of honeycomb structures as well as for bonding doors and panels, H.B. Fuller HL9691 is frequently utilized.

Adecol® C-2141 is a versatile liquid contact adhesive that excels in wood assembly, paper bonding, and couplings. With its long open time and good fluidity, it allows for precise application and strong bonds. The adhesive offers good initial tack and excellent machinability, making it ideal for use in industrial settings. It can be applied using a nozzle, roller, or brush, and is compatible with various substrates such as cellulose, kraft paper, and wood. Its high performance and easy application ensure reliable results across multiple industries.

H.B. Fuller SC0762-001 is a solvent primer that dries quickly and is designed for polyvinyl chloride and acrylonitrile butadiene styrene (PVC/ABS). This is a featured product used for pre-treating foils to enhance hot melt adhesion in window frames and fenestration applications.