Products

Swift®lock 2U340 is a single-component, fully reactive hot melt adhesive that cross-links through a chemical reaction with moisture found in the surrounding air and substrates, to produce a thermoset adhesive. It was specifically formulated for difficult to bond plastics, such as ABS and vinyl, to a wide variety of metals. It was designed to provide a good balance of properties. The rheology of the product gives excellent release from roll coaters and no stringing of adhesive. The open time of three minutes is sufficient for assembly of a wide variety of applications. Green strength development of greater than 50 psi in 15 seconds holds difficult substrates together after combining. Long term aging studies show excellent retention of adhesive properties.

H.B. Fuller MP5405 is a two-part unfilled epoxy adhesive designed for ceramics and most plastics. It cures to a tough, semi-rigid material with a free-flowing viscosity. It has good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. It was especially formulated to have a 1:1 mix ratio for use in either MMD equipment or side-by-side dual cartridges for easy dispensing. Handling strength is normally achieved at room temperature within 3 - 5 minutes, with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Swift®hardener 49190 is a water-based, two-component polyurethane crosslinker. It is designed to be blended with adhesives to enhance their heat- and water-resistance properties. When added to Swift®tak 9965 adhesive at a recommended ratio of 10–15%, it improves the overall performance of the adhesive. Swift®hardener 49190 is commonly used in applications such as vinyl and paper continuous panel lamination, engineered wood flooring manufacturing, and panel lamination for flooring production.

Swift®tak 9965 is a water-based synthetic resin known for its excellent water and heat resistance. It offers reliable bond performance across a broad temperature range and meets the ANSI/HPVA EF 2012 standard. This adhesive is specifically designed for engineered wood flooring manufacturing and is well-suited for bonding engineered wood flooring and parquet.

Swift®tak PA368 is a water-based synthetic resin adhesive specifically formulated for use in hot, cold, or RF (radio frequency) press applications. It offers fast-setting properties, allowing for a press time of just 30 minutes. Additionally, it has a closed assembly time of up to 15 minutes. This adhesive is well-suited for engineered wood flooring manufacturing and is ideal for bonding engineered wood flooring and parquet.

Rapidex® 4001-149 is a high-quality polyurethane hot melt adhesive known for its excellent green strength, aggressive hot tack, and good coater stability. It is specifically designed for engineered wood flooring manufacturing and is well-suited for bonding engineered wood flooring and parquet.

H.B. Fuller HM1597 is a versatile adhesive designed for various applications. It is compatible with composite substrates, making it suitable for a wide range of uses. In the building and construction industry, it finds its application in wood flooring, providing excellent adhesion to ensure durable and reliable bonding. Additionally, in the healthcare and pharmaceutical sectors, it is utilized in disposable nonwovens and disposable ware applications.

Rakoll® 4933 is an adhesive that provides strong and reliable bonding while contributing to lower hazardous emissions. H.B. Fuller recognizes the increasing importance of sustainability and the need for stricter certification of manufactured woodworking materials. Rakoll 4933 has been specifically designed to meet the toughest emission regulations, ensuring compliance both now and in the future.

Rakoll® GXL 3 is an easy-to-apply adhesive that is suitable for many processing conditions and provides very strong bonding. As a PVAc adhesive, it meets the requirements of class D3 as a one-component product. When mixed with Rakoll® GXL-3-Härter, it meets the requirements for the D4 standard DIN EN 204.

Rakoll® 4654 is a polyurethane-based reactive hot melt adhesive specifically designed for profile wrapping of wood and wood-based substrates. This adhesive fulfills the application requirements for easy processability and high-quality finished products. It exhibits high initial strength and a fast setting, making it ideal for bonding difficult substrates.

Körapur® 140 is a single-component, elastic, moisture-curing polyurethane adhesive used for bonding and sealing primered and varnished metals, aluminum, wooden materials, and duroplastics. This high-strength, elastic adhesive has excellent properties such as high cold resistance, high heat resistance, excellent moisture resistance, and excellent weather resistance.

Rakoll® GXL 4 is a water-based PVA-based emulsion adhesive known for its high bonding strength. It is specifically designed for flat lamination applications, making it suitable for use in engineered wood flooring, parquet, window frames, and fenestration. The adhesive provides strong and durable bonds, ensuring reliable performance in these applications.

FLX 570 adhesive is a premium, two-component, solvent free, polyurethane adhesive. It is moisture and weather resistant. It is suitable for both indoor and outdoor applications. It is suitable for various rubber and wooden flooring applications. The two-part FLX 570 consists of part A which is a thixotropic paste, and part B, which is a cross-linking hardener. When the two parts are mixed, a uniform cream-colored paste is obtained, which is easy to apply using a brush or roller.

Rapidex® 2075 LT is a reactive hot melt adhesive known for its exceptional initial strength and is particularly suitable for tensioned substrates. It is widely used in panel lamination and wrapping of decorative surfaces, as well as in furniture components, doors, and flooring manufacturing.