Products

Swift®tak PA368 is a water-based synthetic resin adhesive specifically formulated for use in hot, cold, or RF (radio frequency) press applications. It offers fast-setting properties, allowing for a press time of just 30 minutes. Additionally, it has a closed assembly time of up to 15 minutes. This adhesive is well-suited for engineered wood flooring manufacturing and is ideal for bonding engineered wood flooring and parquet.

Swift®lock 2U611 is a reactive chemistry PUR hot melt adhesive that offers a high green strength build and excellent plasticizer resistance. It adheres well to a wide variety of core and laminate substrates. It is commonly used in engineered wood flooring manufacturing for resilient flooring.

Rakoll® GXL 4 is a water-based PVA-based emulsion adhesive known for its high bonding strength. It is specifically designed for flat lamination applications, making it suitable for use in engineered wood flooring, parquet, window frames, and fenestration. The adhesive provides strong and durable bonds, ensuring reliable performance in these applications.

Rapidex® 2075 LT is a reactive hot melt adhesive known for its exceptional initial strength and is particularly suitable for tensioned substrates. It is widely used in panel lamination and wrapping of decorative surfaces, as well as in furniture components, doors, and flooring manufacturing.

H.B. Fuller SIGEL is a surface-insensitive cyanoacrylate adhesive. This high-viscosity gel is used in applications that require faster cure speeds on parts that are dry and on parts that may be acidic. The SI series bonds a wide range of similar and dissimilar surfaces. This series provides exceptional performance in a wide range of applications.

Swift®lock 2U340 is a single-component, fully reactive hot melt adhesive that cross-links through a chemical reaction with moisture found in the surrounding air and substrates, to produce a thermoset adhesive. 2U340 was specifically formulated for difficult to bond plastics, such as ABS and vinyl, to a wide variety of metals. 2U340 was designed to provide a good balance of properties. The rheology of the product gives excellent release from roll coaters and no stringing of adhesive. The open time of three minutes is sufficient for assembly of a wide variety of applications. Green strength development of greater than 50 psi in 15 seconds holds difficult substrates together after combining. Long term aging studies show excellent retention of adhesive properties.

Rakoll® 5010 is a polyurethane-based hot melt adhesive that is free from hazardous labeling due to its containing less than 0.1% monomer isocyanate. This makes it an environmentally friendly choice for the workplace, along with providing high initial strength and versatility. It is commonly used for flat lamination of decorative papers, foils, and veneers, as well as HPL and CPL. It is also utilized in the manufacturing of wood furniture, flooring, and doors.

H.B. Fuller UR2165 is a reactive-chemistry, two-part urethane adhesive. It can be sanded in 10 minutes and passes bending, nailing, flexing, and shaping tests. H.B. Fuller UR2165 is often used for knot filling in engineered wood flooring and parquet applications.

Swift®melt 82674 PW is a pressure-sensitive, hot-melt adhesive known for its very high peel strength, which allows it to form permanent bonds. It offers excellent quick-stick properties and high heat resistance. This adhesive is commonly used in industrial assembly applications for bonding materials such as wood, textiles, carpet, foam, vinyl, and certain plastics.

Swift®tak 9965 is a water-based synthetic resin known for its excellent water and heat resistance. It offers reliable bond performance across a broad temperature range and meets the ANSI/HPVA EF 2012 standard. This adhesive is specifically designed for engineered wood flooring manufacturing and is well-suited for bonding engineered wood flooring and parquet.

Rapidex® 4001-149 is a high-quality polyurethane hot melt adhesive known for its excellent green strength, aggressive hot tack, and good coater stability. It is specifically designed for engineered wood flooring manufacturing and is well-suited for bonding engineered wood flooring and parquet.

Rapidex® 1008 is a one-component polyurethane, 100% solids, reactive hot melt adhesive. This product is designed to offer aggressive hot tack and superior green strength at elevated plant temperatures. It cures in the presence of water to form a tough, elastomeric film, with optimal adhesion achieved between 10 seconds and 4 minutes.