Tuskbond Infusion 701 - 22L Canister

1 of 57 products in this brand
Tuskbond Infusion 701 - 22L Canister Infusion Adhesive is a specially developed spray adhesive designed to hold reinforcing fibres in place during the infusion process of Resin Transfer Moulding.

Product Type: Adhesive

Application Area: Resin Transfer Molding (RTM)

Compatible Substrates & Surfaces: Fibre-reinforced Plastic (FRP), Glass-reinforced Plastic (GRP)

Application Method: Spray

Features: Fast Drying, Good Bonding Strength

  • TypeDocument Name
View All Documents

Enhanced TDS

Identification & Functionality

Features & Benefits

Ready-to-Use Product Features

Applications & Uses

Application Area
Application Method
Compatible Substrates & Surfaces
Guidelines for Use

Preparation:(22 L)

  • Use in a well Ventilated Area.
  • Surfaces to be bonded should be clean, dry and dust free.
  • Once the hose and gun has been attached to the canister, open the valve fully. Check the connection points for leaks at this time.
  • On first use, the canister may initially take a few seconds to spray correctly. Spray initially onto on a scrap surface to ensure the spray pattern is correct for the application. The trigger restrictor on the gun can be used to set the spray to the required width.

Application:

  • Hold the spray gun 8-10 inches away; perpendicular to the surface to be sprayed.
  • Apply an even coating of adhesive across the surface.
  • Before continuing, allow the solvents to flash off from the adhesive.
  • For demanding applications, the adhesive can be applied to both surfaces to increase bond strength.

Properties

Physical Form
Appearance
Green or colourless
Typical Properties
ValueUnitsTest Method / Conditions
Application Temperature15 - 25°C-
Open Time2 - 4minutes-
Drying Time5 - 15seconds-
Coverage440.0-
Solids Content31.0%-
Storage Temperature15 - 35°C-

Packaging & Availability

Country Availability
Regional Availability
  • Africa
  • Europe
  • India
  • Middle East
Packaging Size

Available Size:

  • 22L Canister

Storage & Handling

Shelf Life
12 months
Disposal Information
  • Once the aerosol is empty of any hazardous materials and depressurised, it can be considered as scrap metal, in accordance with the national or local waste company, under code EWC 15 01 04* (empty aerosol, non-hazardous residues).
  • Canisters and aerosols that are still pressurised and contain product should be disposed of in accordance with the national or local waste company under code EWC 16 05 04* (full or partially empty aerosol).
Storage & Shelf Life
  • Protect from extremes of temperature in a controlled environment between 15 and 35°C, and away from direct sunlight. Do not stand on a cold concrete floor. Low temperatures can result in irreparable separation of the adhesive.
  • Stored under the correct conditions, in original, unopened containers, the product will have a shelf life of 12 months. The adhesive will have a limited life once the container is opened.