Products

SILAPRENE® All Weather Sealant is a solvent-based sealant. It dries fast and becomes tack-free in less than one hour. It offers outstanding resistance to water and moisture and resists cracking, chipping, and peeling. It is commonly used for sealing multiple substrates, including galvanized metal, wood, particleboard, EPDM, and other types of rubber, in RVs, specialty vehicles, busses, trucks, commercial vehicles, and trailers.

Cilbond® 80ET is a solvent-based rubber bonding agent topcoat known for its exceptional rubber-to-metal bonding properties. It bonds various general-purpose elastomers and offers versatility in bonding EPDM, HNBR, NBR, NR, ECO, and other elastomers. It is commonly used in rubber-to-metal bonding applications, including high-performance timing belts.

Cyberbond CB 2011 is a cyanoacrylate with extremely good properties for bonding rubber (especially EPDM) and plastics with each other or in combination. The aging properties of these joints are outstanding. The medium viscosity of CB 2011 is considered favorable for manual applications.

Adcotherm ADS-340 emerges as a potent adhesive and sealant solution. This high-strength, synthetic elastomer-based adhesive or sealant, when applied hot, forms an enduring bond across diverse substrates. Its versatile nature ensures a secure seal, guarding against the intrusion of moisture, dust, and air.

Cyberbond CB 2006 is a cyanoacrylate with extremely good properties for bonding rubber (especially EPDM) and plastics with each other or in combination. The aging properties of these joints are outstanding. The overall properties made CB 2006 (like CB 2008) a favorable EPDM bonder. Compared to CB 2008 the viscosity is slightly higher. In addition, the low viscosity allows for very thin bond layers. CB 2006 should be considered the first choice in this viscosity range.

Adcobond D18-221 is a range of high-performance, black, butyl, pressure-sensitive tapes. These tapes are extruded to conform to either round or flat profiles, adhering to specified dimensional tolerances. Unless otherwise specified, the material is protected on one side with a removable release liner.

Cyberbond CB 1070 is very suitable for metal-to-rubber or plastic combinations. It is not recommended for bonding metal to metal. Due to its viscosity, CB 1070 should be considered the most favorable grade in this series. It is a general-purpose cyanoacrylate that is fast-bonding and has low viscosity.

H.B. Fuller 12149 is a pressure-sensitive adhesive made with modified rubber, known for its high heat resistance. It has a high tack, excellent peel strength, and good resistance to creep and cold flow. Additionally, it exhibits high shear strength and retains its tack even at temperatures as low as 40°F.

Apollo Roofing MemBond Water-Based EPDM Membrane Adhesive is a water-based EPDM membrane adhesive formulated with a water-based acrylic adhesive. It securely bonds EPDM membranes and is specifically designed for securely bonding non-backed EPDM membranes to timber and other porous roof decking. This adhesive is a water-based, non-flammable, and low-odor liquid. It allows for a simple one-way stick application, providing ease of use. Additionally, it is an excellent choice for single-ply membrane adhesives.

Millennium LVOC Single-Ply Bonding Adhesive falls under the category of solvent-based adhesives. One notable advantage is its low VOC (volatile organic compound) content, making it compliant with regulations in VOC-regulated regions. This ensures environmentally-friendly use while meeting the required standards. Additionally, it is compatible with both TPO (thermoplastic olefin) and EPDM (ethylene propylene diene monomer) membranes, providing versatility in roofing applications. The adhesive also exhibits excellent spreadability, facilitating easy and efficient application. Millennium LVOC Single-Ply Bonding Adhesive is specifically used for installing EPDM and TPO roofing membranes over insulation, cover boards, or other acceptable substrates. It is commonly employed in single-ply membrane applications, ensuring reliable adhesion and long-lasting performance. Its low VOC content, compatibility with different membrane types, and excellent spreadability contribute to its effectiveness and suitability for roofing projects.

H.B. Fuller 13674 is a one-component, water-based, synthetic polymer emulsion adhesive designed for bonding low-surface-energy substrates such as EPDM and TPO. It offers excellent resistance to heat and moisture and is flexible at low temperatures. Common applications include industrial assembly, RV and trailer roofing and flooring, and bonding EPDM, TPO, metal, plywood, and concrete.

Apollo Roofing MemBond EPDM Membrane Adhesive is a solvent-based EPDM membrane adhesive made from synthetic rubber. It is specifically designed for securely bonding EPDM membranes, offering excellent weathering resistance. This adhesive is ideal for detail work. It is suitable for securely bonding EPDM to a wide variety of substrates, including concrete, timber, and insulation board. Additionally, it is an excellent choice for single-ply membrane adhesives.

Cyberbond CB 2028 is a cyanoacrylate with extremely good properties for bonding rubber (especially EPDM) and plastics with each other or in combination. The medium viscosity of CB 2028 is considered favorable for manual applications. It is fast-bonding and has medium viscosity along with good aging properties.

Swift®col 2411 is a versatile ready-to-use adhesive classified as a contact adhesive, reactive adhesive, and solventborne adhesive. It is employed in various applications, including automotive headliners and textiles. You can apply it using methods such as brushing or spraying. This adhesive exhibits excellent adhesion to a wide range of substrates and surfaces, including painted surfaces, plastics, fiberboard, textiles, wood, metal, elastomers, rubbers, EPDM, foils, polyolefins, coated surfaces, and polypropylene (PP). It is also recognized for its heat- and water-resistant properties.

Swift®therm 2003NA is a fast-setting, polyurethane reactive hot melt adhesive used for industrial assembly and automotive interior applications. It will adhere to a variety of substrates and has a relatively short open time, making it ideal for manual attachments and small pieces.