Swift®therm 2003NA is a fast-setting, polyurethane reactive hot melt adhesive used for industrial assembly and automotive interior applications. It will adhere to a variety of substrates and has a relatively short open time, making it ideal for manual attachments and small pieces.

Product Type1K (1 component) Adhesive, Hot Melt Adhesive, Reactive Adhesive

Application AreaAutomotive Interior Trim, Carpets, Wires

Compatible Substrates & SurfacesAcrylonitrile Butadiene Styrene (ABS), Aluminum, Ethylene Propylene Diene Monomer (EPDM), Fiberboard, Fibers & Fabrics, Foam, Metal, Paper, Plastics, Polypropylene (PP), Polyvinyl Chloride (PVC), Sheet Molding Compound (SMC), Steel, Textiles, Wood

Chemical FamilyPolyolefins, Polyurethanes (PU)

FeaturesChemical Resistant, Cold Resistance, Cost Effective, Excellent Substrate Adhesion, Fast Setting, Good Bonding Strength, Good Green Strength, Good Moisture Resistance, Heat Resistance, High Strength, Improved Adhesion, Improved Flexibility, Improved Toughness, Medium To Short Open Time

Technical Data Sheet

Enhanced TDS

Identification & Functionality

Features & Benefits

Labeling Claims
Product Highlights

2003NA is a single-component hot melt adhesive that cross-links through a chemical reaction with moisture found in the surrounding air and substrates. 2003NA is especially effective for automotive interior trim applications. Additionally, the intrinsic chemical nature of wood and wood products makes 2003 NA ideal for bonding soft woods, hard woods, particle board, MDF, papers and wood veneers. It bonds equally as well to EPS, PU foam, aluminium, steel, and various steel coatings, including epoxy/phenolic coatings, and various plastics, such as PP, PVC, ABS, and SMC.

Applications & Uses

Typical Application

Swift®therm 2003NA is used in lamination and assembly applications in the automotive industry, industrial assembly, panel lamination, woodworking, and furniture production.

Instructions for Use
  • Application temperature: 280°F - 350°F.
  • The structure of the substrates and working conditions will influence adhesive bonding. Adhesive trials with substrates under customer conditions are necessary. Due to the high softening point and melting temperature quick melting and application of adhesive is recommended. Avoiding too long heat exposure of adhesive in the pre-melter prevents from thermal degradation and decreasing of bonding quality.
  • Remarks: Prolonged exposure to high temperature should be avoided since this may be lower the bonding performance. Usually, this adhesive is not suitable for plastics containing monomeric plasticizers: plasticizer migration can cause degradation of the adhesive film. Applications like this have to be tested for compatibility.
  • Cleaning instructions: While the product is hot a preliminary cleaning should be done by scraping with a spatula.


Physical Form
Transparent yellow
Technical Data
ValueUnitsTest Method / Conditions
Specific Gravity (at 20°C)0.93
Softening Pointapprox. 294°FMettler - ASTM D3641-76
Viscosity (at 350°F)5000 - 8000cPBrookfield
Application Temperature280 - 350°F
Open Time (at 200°C, 4mm bead)approx. 10s
Green Strength Build (in 30s)50.0psi
Tensile Strength400.0psiASTM D638
Elongation at Break800.0%ASTM D638
2% Secant Modulus1450.0psi
Cure Time (at 77°F, 50% RH)approx. 7days

Packaging & Availability

Packaging Type
Regional Availability
  • North America
Packaging Information

Swift®therm 2003NA is available in mini-pillows packed in 14kg boxes.

Storage & Handling

Shelf Life
3 Months
Storage Condition

Store material in original unopened packaging at temperatures between 15°C to 35°C. Protect from sun, dust, moisture and high temperatures in clean and dry storage conditions. Material is frost resistant.