Products

H.B. Fuller 5005 is a single-component, low-viscosity ethoxyethyl cyanoacrylate adhesive. It is designed for applications where vapor control is an issue, thanks to its low-odor and non-blooming characteristics. H.B. Fuller 5005 is certified to ISO 10993-5 for biocompatibility, making it suitable for use in medical device applications.

Swift®melt 2009 is a versatile, ready-to-use pressure-sensitive adhesive designed to elevate various applications. This adhesive shines in container labeling and automotive trims, providing excellent machinability, runnability, and substrate adhesion. Swift®melt 2009's versatility shines through its tacky nature and adaptability. This innovative adhesive caters to diverse markets, including automotive, transportation, printing, and packaging. Its application scope extends to automotive trims and container labeling, making it a valuable asset in enhancing various products and processes.

Körapop 235 is a permanently elastic adhesive. It can also be used as a 2K version with accelerator paste for specific applications. This adhesive is primarily used for assembly bonding and interior finishing in various industries, such as trailer and commercial vehicle manufacturing.

Swift®col 2607-03 A is a solvent-based 2-component adhesive formulated with polyurethane. It is designed for a variety of bonding applications, including stress and flat surface bonding, as well as edge bonding. This adhesive is suitable for adhering materials such as foils, carpets, textiles, foams, genuine and artificial leather, etc., to fibrous materials, GRP, wood-based composites, SMC, and more. It is commonly used in the manufacture of bodywork moldings, including headlinings, door and side panels, pillar coverings, rear shelves, and similar components.

Hydra FAST-EN® DC-12623 is a one-part sprayable contact adhesive that is designed to bond various porous surfaces, especially open-cell polyurethane foams. The system is low-cost, highly stable, user-friendly, and allows for quick mating of surfaces after adhesive application. Hydra FAST-EN® DC-12623 provides good bonds in lay-flat scenarios and can be used with higher-strength urethane foams. Sprayed materials can be wet-mated (for lay-flat) or dry-mated (for stress scenarios). The final bonds are soft and supple. Other applications where the use of solvent-based, flammable, and non-flammable systems is a concern for either health or environmental reasons may also be suitable candidates for the use of this product.

EternaBond® Acrylic Tape Black (AT-5) is a pressure-sensitive, black, foam-core acrylic tape system designed to provide a superior bond between a wide variety of substrates. The tape possesses a uniform, high-tack acrylic adhesive on both surfaces and will bond to most clean, dry, oil-free substrates.

Adcobond D18-221 is a range of high-performance, black, butyl, pressure-sensitive tapes. These tapes are extruded to conform to either round or flat profiles, adhering to specified dimensional tolerances. Unless otherwise specified, the material is protected on one side with a removable release liner.

ZKLT PK-618B is your go-to solution for crafting vehicle interior ceilings and sunroof panels. This adhesive excels at bonding PU foam, glass fiber, non-woven fabric, kraft paper, and more. Its outstanding features include solvent-free, eco-friendly composition, rapid curing, robust bonding strength, and excellent heat resistance.

Cyberbond CB 2999 is a surface-insensitive, fast-bonding cyanoacrylate with a very high viscosity. This product performs very well on most materials, including acidic surfaces such as wood, leather, cardboard, paper, etc. CB 2999 is a thixotropoic product, also called gel, meaning that once applied, the adhesive will stand even on vertical surfaces. In addition, it has very good gap-filling properties.

ZKLT PK-610AS is a one-component moisture-curing polyurethane adhesive. Designed for diverse applications, it excels in bonding PHC board, density board, PP honeycomb board, PET fabrics, non-woven fabric, and more in automotive carpet and trunk carpet assembly. With impressive green and final strength, plus exceptional high-temperature resistance, it's the adhesive of choice for composite bonding.

Thermonex® 080-03A is a ready-to-use contact adhesive expertly crafted for the demanding requirements of automotive interiors. It stands out with its ease of processing, remarkable substrate adhesion, heat resistance, and long-lasting durability. This adhesive is the ideal choice for the automotive and transportation sectors.

Swift®melt 2873 is a 100% solids, single-component unreactive hot melt adhesive with excellent low-temperature flexibility, thermal and solvent resistance, and low modulus/high impact strength. It functions as a pressure-sensitive adhesive at room temperature, suitable for bonding plastic, wood, metal, and glass substrates.

Swift®therm 2699, a thermoplastic polyolefin hot melt, is another robust option for bonding untreated polypropylene and ABS. Suitable for both slot die and roll coating, the extended shelf life and easy reactivation make pre-application of Swift®therm 2699 months in advance of lamination not only a possibility but also an economical choice for high-speed vacuum lamination processes. Best of all, Swift®therm 2699 is a clean, thermoplastic material with low VOC emissions.

H.B. Fuller 13674 is a one-component, water-based, synthetic polymer emulsion adhesive designed for bonding low-surface-energy substrates such as EPDM and TPO. It offers excellent resistance to heat and moisture and is flexible at low temperatures. Common applications include industrial assembly, RV and trailer roofing and flooring, and bonding EPDM, TPO, metal, plywood, and concrete.