Products

H.B. Fuller 48173/58173 is an extra-fast setting, two-component, room temperature-curing epoxy adhesive. This system will cure at as low as -18°C (0°F). It has a convenient mix ratio, excellent cohesive strength, and bonds to most substrates, including concrete, ceramics, metals, carbon steel, stainless steel, aluminum, plastics, epoxy, stone, wood, glass, china, and leather. It is recommended for fast patching, fixturing, and other repairs requiring quick handling strength. Two slower-setting versions of this system are also available, which include 58185, which sets in approximately 10 minutes, and 58269, which sets in approximately 20 minutes. This extra-fast-setting epoxy is an excellent general-purpose adhesive. H.B. Fuller 48173/58173 is available in the unique DOUBLE/BUBBLE® job-sized package as Reorder No. 04001.

Rakoll® HL9622 is a high-performance polyurethane adhesive designed for corner key and door light applications. With its exceptional green strength, it provides reliable bonding for vinyl, paper, and wood veneers to MDF, particle board, and composite materials. This adhesive is particularly suitable for interior profile wrapping on windows.

H.B. Fuller Ködispace 4SG is a high-performance warm edge system that is ideally suited for use in structural glazing façades due to its special material properties. meets the requirements of silicone-sealed glazing. Unlike conventional thermoplastic spacers, this reactive polyisobutylene chemically bonds with both the silicone edge seal usually used in glass façades and the glass surface.

Swift®lock 4790 is a polyurethane-based reactive hot melt adhesive designed for various applications. It boasts a short open time, rapid setting, and high initial strength. Upon curing, it achieves exceptional resistance to cold, heat, and humidity, accompanied by elevated mechanical properties. Approved under RAL 716 standards, it is particularly suitable for coating PVC window profiles with PVC foils. This product offers reliable performance and durability for your adhesive needs.

Swift®lock 2003 is a one-part hot melt adhesive that cures through a chemical reaction with moisture in the air and substrates. It is suitable for automotive interior trim applications and bonding a variety of wood-based substrates, such as soft woods, hard woods, particle board, MDF, papers, and wood veneers.

Swift®lock 4780 is a polyurethane-based reactive hot melt adhesive designed for versatile applications. It offers a brief open time, rapid setting, and strong initial bonding. Once cured, it exhibits excellent resistance to cold, heat, and humidity, along with impressive mechanical properties. This adhesive is particularly suited for coating PVC window profiles with PVC foils, ensuring reliable performance and durability for your adhesive needs.

TEC® Double Duty™ Plus White Ceramic Tile Adhesive (123) is a premium, ready-to-use white, 100% acrylic interior adhesive. Excellent for setting marble and ceramic tile over interior walls and floors. Approved for floor applications with tile up to 8" x 8" (200 x 200 mm) and wall applications with tile up to 20" x 20" (500 x 500 mm). A bright white, non-staining formula is perfect for light-colored stone and grout.

H.B. Fuller PD0124 is a vinyl acetate-acrylic copolymer adhesive that is surfactant stabilized. It offers excellent binding strength, good water resistance, and excellent pigment binding properties. It also provides good scrub resistance and low-temperature touch-ups. It is commonly used in dust control and soil stabilization as well as interior coatings in the construction, architectural, and specialty coatings industries.

Flexel™ EM9002 is a heat-activated adhesive film designed to bond plastic substrates such as ABS, PC, pre-treated olefins, textiles, artificial leather, and genuine leather at low temperatures. This adhesive film exhibits high fracture toughness, peel strength, and shear strength while maintaining flexibility. It offers excellent adhesion to plastics and textiles.

Swift®therm 2103NA is a longer open time hot melt adhesive developed for industrial assembly and automotive interior applications. It will adhere to a variety of substrates, such as plastics, ABS, EPDM, wires, carpets, wood, aluminum, PP, fiberboard, Lignotock, and Fibrit, and is great for bonding blocked textile into PP and ABS.

Swift®therm 2003NA is a fast-setting, polyurethane reactive hot melt adhesive used for industrial assembly and automotive interior applications. It will adhere to a variety of substrates and has a relatively short open time, making it ideal for manual attachments and small pieces.

Swift®lock 2009 is a moisture-curing reactive hot melt adhesive based on PO. It is designed to form a very strong bond that is resistant to heat, cold, and moisture after final curing. This product is characterized by its stability of viscosity during application, ensuring consistent and reliable performance. Additionally, Swift®lock 2009 offers high green strength.

Rapidex® 2075 LT is a reactive hot melt adhesive known for its exceptional initial strength and is particularly suitable for tensioned substrates. It is widely used in panel lamination and wrapping of decorative surfaces, as well as in furniture components, doors, and flooring manufacturing.

Swift®col 2411 is a versatile ready-to-use adhesive classified as a contact adhesive, reactive adhesive, and solventborne adhesive. It is employed in various applications, including automotive headliners and textiles. You can apply it using methods such as brushing or spraying. This adhesive exhibits excellent adhesion to a wide range of substrates and surfaces, including painted surfaces, plastics, fiberboard, textiles, wood, metal, elastomers, rubbers, EPDM, foils, polyolefins, coated surfaces, and polypropylene (PP). It is also recognized for its heat- and water-resistant properties.

Millennium PG-1 Pump Grade (Low Viscosity Insulation) Adhesive is a two-component, essentially VOC-free, all-purpose, low-rise, polyurethane foamable adhesive that contains no solvents and sets in minutes. The application process is quick and easy, resulting in significant labor savings for the contractor. Millennium PG-1 Pump Grade Adhesive is dispensed through the Patented Millennium Cyclone Low Pressure Pump Cart* (by Garlock) or an approved low pressure pump cart that equally mixes Part 1 and Part 2 of the adhesive, providing a quality, consistent application each time.