Products

Millennium EPDM Seam Tape is a black, vulcanized rubber, pressure-sensitive adhesive tape designed to provide high strength and watertight seams for single ply EPDM roofing membranes. Millennium EPDM Seam Tape is soft and tacky, providing a quick grab onto EPDM field membranes, yet possesses high initial strength. Millennium EPDM Seam Tape exhibits excellent adhesion to most substrates, including glass, metals, wood, concrete, masonry, and some plastics. This tape will provide OEM-quality performance for EPDM single-ply restoration projects.

RBUV213A is a single-component, low-viscosity anaerobic thread-locking adhesive with a UV-initiated surface cure component. It prevents the loosening and leaking of threaded fasteners and is ideal for preassembled components, where its low viscosity and capillary action allow it to wick into threaded assemblies. Additionally, RBUV213A can be used to fill porosity in welds and castings.

Cyberbond CB 2028 is a cyanoacrylate with extremely good properties for bonding rubber (especially EPDM) and plastics with each other or in combination. The medium viscosity of CB 2028 is considered favorable for manual applications. It is fast-bonding and has medium viscosity along with good aging properties.

Swift®therm 2003NA is an attachment adhesive developed for automotive interior applications. It will adhere to a variety of substrates and has a relatively short open time making it ideal for manual attachments and small pieces.

Masterfix 770 is a high-coverage, low-viscosity, one-component contact adhesive based on cross-linked synthetic rubber with special tackifiers and additives. It is specially developed to be compatible with most substrates and exhibits excellent film-forming properties, providing uniform bonding to a wide range of surfaces.

Tonsan TS805 High Strength Structural Adhesive is a two components, room temperature curing, 1:1 mix ratio by volume, methacrylate adhesive system. Cured layer has high toughness and good resistance to peeling off. Fixture time is 30 minutes. With good thixotropic property. The product is suitable for bonding a variety of substrates with a minimum of surface preparation.

Tonsan STP1921 is a high quality, neutral, elastic single component adhesive/sealant based on Silane-terminated Polymer, which cures by reaction with moisture to an elastic product. The skin formation and curing time are dependent on humidity and temperature, and the curing time also depends on joint depth. By increasing the temperature and moisture these time can be reduced; low temperature as well as low moisture retard the process. STP 1921 is a good compromise between an adhesive and a sealant based on Silane-terminated Polymer. STP 1921 is suitable for elastic seal which also high strength is required. STP 1921 is odourless and free of solvents, isocyanates, silicones and PVC. It demonstrates good adhesion without primer to many substrates and is compatible with suitable paint systems. The sealant also demonstrates good UV resistance and therefore can be used for interior and exterior applications.

Tonsan MS1937 is a high quality, neutral, elastic single component adhesive/sealant based on MS-Polymer, which cures by reaction with moisture to an elastic product. The skin formation and curing time are dependent on humidity and temperature, and the curing time also depends on joint depth. By increasing the temperature and moisture these time can be reduced; low temperature as well as low moisture retard the process. MS1937 is a good compromise between an adhesive and a sealant based on MS-Polymer. MS1937 is suitable for elastic seal which also high strength is required. MS1937 is odourless and free of solvents, isocyanates, silicones and PVC. It demonstrates good adhesion without primer to many substrates and is compatible with suitable paint systems. The adhesive/sealant also demonstrates good UV resistance and therefore can be used for interior and exterior applications.

Tonsan TS828 is a 10:1 ratio two-component methacrylate structural bonding adhesive. It is suitable for bonding various materials including metals and composite materials. The adhesive has fast curing speed, high strength after curing. Fixture time is 8~10mins under room temperature.

Rakoll® 5016 is a reactive hot-melt adhesive designed for excellent performance in spray applications. It has a low viscosity and offers improved wettability and good initial strength. The adhesive is formulated with a low concentration of isocyanate monomer, making it free from hazardous labeling and providing a safer working environment.

Masterfix 775 is a one-component contact adhesive based on cross-linked synthetic rubber with special tackifiers and additives. It is specially developed for bonding TPO membranes with various substrates in waterproofing applications. Masterfix 775 features excellent film-forming properties, providing uniform bonding to many surfaces.

Magik VB 95 is a UL Classified, anti-fungal, low VOC, water-based, fire retardant, high-solid vapor barrier coating for duct insulation. It is flexible, washable, tough, abrasion-resistant, and has low odor. Magik VB 95 offers excellent water resistance and low water permeance, making it suitable for high-humidity environments. It effectively retards water vapor permeation and is specially formulated for both indoor and outdoor applications.

Rakoll® 4656 is a versatile reactive hot melt adhesive designed for a wide temperature range and thick foils with a higher reset force. It offers excellent versatility and is well-suited for applications in panel lamination and wrapping of decorative surfaces, particularly in the furniture industry.

Magik 3217 is a UL Classified, anti-fungal, low VOC, water-based, flexible fire-resistant vapor barrier sealant. It is designed for low, medium, and high-pressure/high-velocity metal, fiberglass, and flexible heating and air conditioning ducting systems. Magik 3217 is highly elastic and offers excellent adhesion to metal and aluminum. It functions as a tough and flexible adhesive and sealant, forming a durable seal against air leakage for both indoor and outdoor use.

FLX 575 carpet adhesive is a high quality, high strength, water-based dispersion adhesive that is compatible with most of the substrates. This product is based on a very special type of synthetic resin, with very high-performance additives, fine grade mineral fillers and tackifier.