Products

Swift®tak 6888 is a water-based adhesive that offers a balance of performance and economics. It is widely used in press lamination applications for automotive interiors. This ready-to-use adhesive provides excellent performance while also being cost-effective. It is classified as a waterborne adhesive and is available in the Asia Pacific region.

Thermonex® Clearbond 201-03AR is a ready-to-use contact adhesive known for its exceptional features, including excellent substrate adhesion, high durability, excellent performance, heat resistance, and easier processing. It primarily caters to the automotive and transportation markets, with a specific focus on applications within automotive interiors.

Körapop 235 is a permanently elastic adhesive. It can also be used as a 2K version with accelerator paste for specific applications. This adhesive is primarily used for assembly bonding and interior finishing in various industries, such as trailer and commercial vehicle manufacturing.

EternaBond® Acrylic Tape Gray (AT-2) is a pressure-sensitive, gray, foam-core acrylic tape system designed to provide a superior bond between a wide variety of substrates. The tape possesses a uniform, high-tack acrylic adhesive on both surfaces and will bond to most clean, dry, oil-free substrates.

Tuskbond AUTOFIX - 500ml Aerosol is a sprayable contact adhesive specifically formulated for bonding vehicle interior trims. The product is fast drying and has a controllable, web spray that makes it perfect for bonding in both overhead and vertical trim applications. The product is perfect for bonding fabrics, carpets, foam and other headlining materials to timber, metals and hard plastics.

Swift®col 2035 is a solvent-based bonding solution that offers premium performance on polar materials, even under cold contact conditions. This can be used for various applications such as press lamination, vacuum lamination, edge folding, priming, and attachment. It is ideal for interior applications.

H.B. Fuller 4193HD pressure-sensitive mastic patch is usually laminated to a plastic film or foil to facilitate installation. It can be die-cut into simple or complex shapes as required by the application. When the appropriate film or foil is used, this material can be applied before paint with no negative impact during bake cycles.

Flexel™ FN2100 is a reactive, low-temperature heat-activated adhesive film specifically formulated for bonding metal substrates like aluminum or stainless steel. FN2100 may also be used for bonding plastic substrates like ABS, PC, pre-treated olefins, textiles, and artificial and genuine leather.

H.B. Fuller AT-1 very high-bond strength acrylic tape is a pressure-sensitive, water-clear, solid acrylic tape system. It is designed to provide a superior bond between a wide variety of substrates. The tape possesses a uniform, high-tack acrylic adhesive on both surfaces and will bond to most clean, dry, oil-free substrates.

Swift®col 2607-03 A is a solvent-based 2-component adhesive formulated with polyurethane. It is designed for a variety of bonding applications, including stress and flat surface bonding, as well as edge bonding. This adhesive is suitable for adhering materials such as foils, carpets, textiles, foams, genuine and artificial leather, etc., to fibrous materials, GRP, wood-based composites, SMC, and more. It is commonly used in the manufacture of bodywork moldings, including headlinings, door and side panels, pillar coverings, rear shelves, and similar components.

H.B. Fuller AT-3 very high-bond strength acrylic tape is a pressure-sensitive, structural-grade, solid acrylic tape system. It is designed to provide a superior bond between a wide variety of substrates. The tape possesses a uniform, high-tack acrylic adhesive on both surfaces with an integral core of solid acrylic polymer that will bond to most clean, dry, oil-free substrates.

Swift®col 2411 is a versatile ready-to-use adhesive classified as a contact adhesive, reactive adhesive, and solventborne adhesive. It is employed in various applications, including automotive headliners and textiles. You can apply it using methods such as brushing or spraying. This adhesive exhibits excellent adhesion to a wide range of substrates and surfaces, including painted surfaces, plastics, fiberboard, textiles, wood, metal, elastomers, rubbers, EPDM, foils, polyolefins, coated surfaces, and polypropylene (PP). It is also recognized for its heat- and water-resistant properties.

ZKLT PK-6400S is a solvent-based polyurethane adhesive, forms strong adhesion through moisture reaction with the air. This adhesive is primarily used in the wet process of headliner assembly, bonding PU parts and fabrics, as well as materials like hemp felt board, non-woven fabric, felt, and foam. Notably, it's environmentally friendly, a 2K moisture-curing adhesive with a long pot life and low molding temperature.

Thermonex® 063-05A is a premium laminator with a focus on interior applications. It offers various features and benefits that make it suitable for this industry. Categorized as a water-based technology, it is primarily used for premium lamination in automotive interior applications.