Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Features
- High heat resistance
- Very high contact bonding
- High mechanical strength
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Processing Information
Preparation
- The surfaces to be bonded must be dry, clean, free of grease, free of dust and free of oil to ensure a reliable bonding.
Processing
- Apply adhesive evenly with a suitable application method on the two parts to be bonded. After the recommended waiting time (flash-off time) put the parts accurately together and press. The waiting time depends on the ambient temperature, thickness of the adhesive film and absorbency of the surfaces. The surfaces to be bonded should be placed together when the adhesive film is still slightly sticky but does not stick to the finger when it is pressed lightly. The parts have to be bonded together within the Contact bonding time. Bonding by activation: When the Contact bonding time is exceeded activate at activation temperature, join together and press.
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Density 0.85 g/cm³ - Solid Content 21 : 27 % - - Processing Parameters
Value Units Test Method / Conditions Activation Temperature (after exceeding the Contact bonding time) 70 - 80 °C - Consumption 100 - 250 g/m² - Contact Bonding Time 10 - 60 min - Flash off 5 - 10 min - Processing Temperature 15 - 25 °C - Storage Temperature 15 - 25 °C - Viscosity 1800 mPa·s -
Technical Details & Test Data
- Processing Information
Suitable Substrates Rubber Plasticizer free plastics Various metals Cork Polyurethane (PUR) Glass Textile Wood Consistency Liquid Sprayable Surface Requirements Dry Clean Free of grease Free of dust Free of oil Surface Cleaning Isa Verdünner 111 N-Heptane Application Method Spraying Brushing - Cleaner for Tools Isa™Verdünner 111
- Undercooled adhesive - Adhesive thickens at temperatures below 5°C. It be used again after warming to room temperature and stirring
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 12 months
- Storage Information
Isarcoll™ 5109 should be used within the shelf life specified on the packaging. The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature). High temperatures shorten the shelf life. Low temperatures temporary cause a higher viscosity.