Products

Foster® 40-20™ Fungicidal Protective Coating is a polyacrylate copolymer emulsion designed for long-term fungicidal effectiveness that remains active even as it ages. This formulation is highly effective at inhibiting the growth of mold and odor-causing bacteria on its surface. It offers a resilient, elastic, and decorative finish that accommodates movement without developing crevices where bacteria can lodge.

Foster® Weatherite™ Mastic 46-50 is a fibrated, water-based breather mastic with a smooth, thixotropic consistency for easy application. It boasts a bright white color, is non-flammable when wet, and emits a mild odor during use. This mastic exhibits excellent brush, trowel, and spray properties.

Cilbond® 89ET is a versatile solvent-based adhesive designed for rubber-to-metal bonding. It serves as a one-coat solution suitable for various elastomer types, including EPDM to metal bonding. This adhesive offers a low activation temperature, making it ideal for tank lining applications. Its uses span across the manufacturing of TVDs, rubber rollers, tank lining, and other rubber-to-substrate applications. Cilbond® 89ET is a reliable choice for rubber-to-metal bonding agents.

Foster® Fibrous Adhesive 81-27™ is an incombustible adhesive formulated with sodium silicate. It is primarily designed for bonding calcium silicate and expanded perlite thermal insulation to both itself and non-porous surfaces. This adhesive provides exceptional adhesion, and ideal working characteristics, and ultimately forms a hard, incombustible film with a brittle texture.

Millennium Surface Treatment is a spray, brush, or roller-applied compound developed for use with Millennium brand adhesives and sealants when bonding to difficult substrates such as plastic films, smooth APP modified bitumen membranes, very fresh non-oxidized (glossy surfaced) asphalt, or coal tar. Millennium Surface Treatment is a solvent-based product and is not fit for use in VOC-regulated markets such as California or the OTC states.

H.B. Fuller UV890SF-150D is a 1-part UV-curable conformal coating adhesive. It is a single-component adhesive with low viscosity and solvent-free properties. It can be applied using a brush, dip, or spray method. It is commonly used to protect printed circuit boards (PCBs) in various high-reliability applications, making it an ideal conformal coating material for electronic components, including electric motors.

H.B. Fuller PD 2128 is a high-tack acrylic pressure-sensitive adhesive (PSA) suitable for a variety of applications, including insulation bonding, flexible circuits, and general bonding. This PSA offers excellent insulation properties, making it ideal for applications where high insulation is required. H.B. Fuller PD 2128 is a ready-to-use pressure-sensitive adhesive that provides strong bonding capabilities.

H.B. Fuller M6306 is a premium-grade contact bond adhesive made from polychloroprene. It is highly versatile and offers high-performance bonding for various substrate types. This adhesive is commonly used for bonding vinyl-coated fabrics, metals, wood, rubber, synthetic and latex foams, thermoplastics, thermoset plastics, composites, and leather. Its exceptional versatility makes it suitable for a wide range of applications.

HydroArmor® 7720 is a latex coating that prevents water from wicking into boat flooring, bus flooring, and recreational vehicle walls. HydroArmor® 7720 can be brushed or rolled onto floor boards, the cut edges of floor boards, wall edges, and to window and wheel openings. The coating dries to form a waterproof seal that prevents moisture from wicking into the AB marine wood flooring, plywood, soft and hardwood, bead board, and the bond lines between the materials used in the construction of the RV walls.

H.B. Fuller EV Protect 1000 is a sprayable water-based intumescent coating designed to add a layer of protection in case of a thermal event in a battery pack. When exposed to flames, the coating will create an insulative layer that prevents direct contact of the flames to the substrate’s surface. This layer provides insulation against the flames and helps slow heat transfer through the coated substrate. H.B. Fuller EV Protect 1000 is formulated to adhere to a variety of common battery pack substrates, including steel, aluminum, e-coat, and ABS plastic. This coating can be easily applied onto battery pack components, and wet film builds of 0.030" can be applied without runs, drips, or sagging.

Foster® Air-Tight™ FDS-181 Duct Sealant is a fire-resistant, fibrate, water-based sealant designed for use on indoor or outdoor low, medium, and high-velocity heating and air conditioning ducts. It serves as a robust and flexible adhesive and sealant, creating a durable seal to prevent air leakage on the faced duct board, flex duct, galvanized aluminum, and stainless steel metal ducts.

Foster® Sealfas® 30-36 HF™ Coating is a halogen-free, white, fire-resistant indoor coating designed for thermal insulation. It also functions as an adhesive for canvas and glass-lagging cloth. With excellent brushing characteristics, it ensures better coverage and uniformly coated surfaces. This coating maintains a neat white finish and does not yellow or discolor with age. The surface can be easily cleaned to remove grease, oil, soot, and other dirt accumulation.

FLX 575 carpet adhesive is a high quality, high strength, water-based dispersion adhesive that is compatible with most of the substrates. This product is based on a very special type of synthetic resin, with very high-performance additives, fine grade mineral fillers and tackifier.

Cilbond® 62W is a trusted and high-performance water-based one-coat friction system designed for compounds used in the Friction Industry. It is primarily used in the manufacturing of products like original equipment (OE) and after-market brake pads. It bonds to all metals commonly used in brake pad production, including Zn/Ni coatings.

Foster® Chil-Grip™ Adhesive CP-124 is a fast-tacking, flammable solvent-based elastomeric adhesive. It's designed for application using low-pressure spray equipment. When sprayed, it forms adhesive "buds" that effectively bond to porous, fibrous insulation surfaces, creating a strong bond with high coverage.