Thermonex - 3086 - H.B. Fuller - PU - Contact Adhesive

Enhanced TDS

Identification & Functionality

Chemical Family: Polyurethanes (PU)
Product Type: Adhesive,
Contact Adhesive,
Reactive Adhesive
Technologies: Adhesives & Sealants
Product Families: Adhesives & Sealants — Bonding Technology
2K Liquid Reactive Adhesives,
Contact Adhesives

Features & Benefits

Ready-to-Use Product Features: Easier Processing,
Excellent Performance,
Excellent Substrate Adhesion,
Heat Resistance,
High Durability,
High Initial Strength,
Low Processing Temperature,
Temperature Resistance
Product Highlights: Good temperature resistance

Very suitable for cold contact adhesive joints at low processing temperatures on temperature-sensitive substrates

Good adjustability

High initial bonding strength

Applications & Uses

Markets: Automotive & Transportation
Applications: Automotive & Transportation — Automotive
Electrical & Electronic Systems,
Interior
Application Area: Automotive Interior Trim,
Electrical Switchgear
Compatible Substrates & Surfaces: Leather
Usage Information: Applications Fields of Application Automotive

Typical Applications
Leather lamination

Cold and warm activated adhesive for use in automotive interior applications (e.g. steering wheel, gear switch, dashboard,...)

Processing Surface Requirements Dry
Clean
Free of grease
Free of dust

Application Method With brush
Spraying

Lamination Process
Manual lamination
Membrane lamination

Cleaning Cleaner for Tools Körasolv PU
Helmitin® 694

Hints Frost protection
Protect adhesive strictly from frost, product will be damaged.
Application Information: Preparation

The surfaces to be bonded must be dry, clean, free of grease and free of dust. Mix adhesive and hardener thoroughly, by adding the hardener during firmly stirring.

Bonding

The adhesive is applied either with brush or by spraying on both substrates. After drying (flash-off time / waiting time at room temperature, can be acellerated by heat) the bonding is done in the deep drawing process. Sub- strates must be joint within contact life. Maximum tem- perature resistance will be reached after 3-4 days.

Cleaning

Water for fresh adhesive, when film is dried use Köra- solv PU or helmitin® 694.

Properties

	Value	Units	Test Method / Conditions
Density (Part A)	1.05	g/cm³	DIN EN ISO 2811-1
Solid Content (by Weight (Part A))	52.0	%	Kö-test method 100035

	Value	Units	Test Method / Conditions
Storage Temperature (Part A)	10 - 25	°C	-
Viscosity (Part A)	10000.0	mPa.s	Kö-test method 100000

	Value	Units	Test Method / Conditions
Pot Life	8.0	Hours	-
Processing Temperature	15 - 35	°C	-
Contact Bonding Time (at 20 °C)	40.0	Minutes	-
Flash-off Time (Waiting Time)	30 - 60	Minutes	-
Consumption (on Closed Surface)	60 - 80	g/m²	-
Consumption (on Borders and Milled surfaces)	100 - 120	g/m²	-
Activation Temperature	20.0	°C	-

Storage & Handling

Storage Conditions: Thermonex® 3086A should be used within the shelf life specified on the packaging. The storage stability ap- plies to material stored under appropriate conditions only (original unopened containers, recommended stor- age temperature).

Applications	Fields of Application	Automotive
Applications	Typical Applications	Leather lamination Cold and warm activated adhesive for use in automotive interior applications (e.g. steering wheel, gear switch, dashboard,...)
Processing	Surface Requirements	Dry Clean Free of grease Free of dust
	Application Method	With brush Spraying
	Lamination Process	Manual lamination Membrane lamination
Cleaning	Cleaner for Tools	Körasolv PU Helmitin® 694
Hints	Frost protection	Protect adhesive strictly from frost, product will be damaged.