Products

H.B. Fuller EH9650 is a fast-setting reactive hot melt adhesive and sealant. It is a 100% solid, one-component material that cures in the presence of moisture. The material is applied warm and sets immediately, allowing handling without the need for heat curing. H.B. Fuller EH9650 has optimum adhesion to a wide range of substrates, including glass, aluminum, stainless steel, plastic-coated wires, common engineered plastics (ABS, PET, PP, vinyl), and woven fabrics, without the need for primers.

Hydra FAST-EN® DC-13239 is a water-borne, two-part sprayable adhesive designed to bond various substrates found in the marine industry. These include open cell urethane foams, foam-backed headliners, marine carpet, fiberglass (bare and gel-coated), treated wood, aluminum, and various fabrics and plastics. The system is user-friendly and addresses many of the common problems encountered with other two-part systems. Other applications where the use of solvent based, flammable and non-flammable systems is a concern for either health or environmental reasons may also be suitable candidates for the use of this product.

Foster® Vapor-Safe® Mastic 30-90 is a high-solids, water-based mastic with fire-resistant properties and flexibility. It serves as a vapor retarder finish for various thermal insulation types, including polystyrene foam. This mastic can be applied over dry concrete and finishing cement surfaces.

Clean Melt® PHC 7688 is a hot melt adhesive with multiple benefits, including suitability for use with fast machines, good adhesion on standard packaging, a wide service temperature range, economical use, very good heat stability, and low odor. This product is typically used for bonding paper, cartons, and corrugated boards with conventional surfaces.

Adecol® C-360/5 adhesive is a copolymer that is based on vinyl / ethylene acetate in an aqueous dispersion, modified with special additives. It is a high-performance adhesive with a quick dry, fast tack performance and strong adhesion and cohesion, even in substrates with low superficial tension.

H.B. Fuller EH9641 is a fast-setting reactive hot melt adhesive and sealant. It is a 100% solid, one-component material with a secondary moisture cure system. This material is applied warm and sets immediately, allowing handling without the need for heat curing. H.B. Fuller EH9641 has optimum adhesion to a wide range of substrates, including glass, aluminum, stainless steel, and common engineered plastics such as polycarbonate.

Swift®tak 5580 is a water-based dispersion adhesive that is phthalates and benzoates free, making it a safe choice for use in manufacturing processes. It boasts high initial tack and very good processing properties, making it suitable for high-speed applications. The adhesive also contains a green fluorescent UV detection agent, simplifying quality control. It is recommended for nozzle application in folding boxes.

Swift®tak 5620 is an industry pioneer in paper straw adhesive that creates strong, liquid-resistant straws for today’s foodservice needs. Tested with the industry’s leading paper suppliers, the adhesive helps ensure that straws withstand 1.5+ hours in liquid without becoming excessively soggy or starting to unravel. Swift®tak SWK-5620 is specifically designed for efficient paper straw production and is FDA 176.170 approved for safe consumer use. Plus, this adhesive may support the creation of a certified industrial compostable paper straw.

H.B. Fuller Ipacoll™ PWC 3135 PB water-based adhesive that exhibits excellent adhesion on coated surfaces and foils. The product is specifically recommended for use on folding boxes, case sealings, as well as for window gluing in the packaging industry; especially used in the food industry as well as for deep freezing goods.

Tonsan® 1581 White is one component material that is unaffected by moisture in the air. This material is recommended for sealing the side frames of solar cells and sealing the solar energy lamps. alkoxy-cure silicone adhesive cures at room temperature when exposed cells are sealed or adhered to the junction boxes of solar cells.

Swift®therm 3055 is a hot melt adhesive with good adhesion to filter media, reduced shrinkage, and good flexibility. It has been developed for the manufacture of air filters as a pleat separator. Filter media is a suitable substrate for this product.

Adecol® C-394 is a vinyl/ethylene acetate copolymer in aqueous dispersion with special additives. It has high grip, initial tack, and fast drying, making it perfect for optimal machinability. This adhesive is used in the side closure of cardboard boxes, manually or through high-speed machines with disk systems.

Weld Mount AT-3, the compact solution for securing small wire ties. This product falls under the adhesive equipment consumables and supplies category, offering a seamless way to manage your wiring needs.

Foster® Sheer Defence™ Mold Resistant Clear Sealer (40-51) is a versatile product suitable for various surfaces. It provides a hard, mar-resistant finish that reduces dirt pickup and effectively seals water-damaged surfaces. This sealer exhibits excellent water resistance without developing haze once fully cured. It can be used over a variety of surfaces, including bare wood, painted surfaces, wallboards, masonry, brick, tile, grout, and metal.

H.B. Fuller MM-8805X is a hot melt adhesive that is designed to provide exceptional performance in a wide range of packaging and paper converting applications. This adhesive is formulated to offer high performance, very fast setting times, and excellent heat resistance, making it ideal for use in demanding manufacturing environments.