Products

H.B. Fuller FH8801 is a one-part acrylate adhesive that undergoes heat curing. It offers fast curing at low temperatures and provides outstanding bond strength. This adhesive is commonly used for chip bonding in microelectronic, MEMS, and opto-electronic applications. It is especially suitable for in-line production as it has the ability to snap cure. FH8801 is an ideal heat cure acrylic for chip bonding and other electronics applications, including electric motors.

H.B. Fuller FH8707HF is a black-colored epoxy-based adhesive designed for a wide range of applications in electronic components, printed circuit boards (PCBs), electric motors, and automotive electrical and electronic systems. This heat-curable adhesive offers excellent filling properties, high strength, and good electrical properties. It exhibits improved aging resistance, ensuring long-term durability.

H.B. Fuller EV Bond 343 is a medium-hardness, semi-flexible two– component polyurethane adhesive designed for bonding applications requiring resilient bonds, non-sag application and enhanced adhesion to flexible substrates. EV Bond 343 is suitable for bonding metals, ceramics, natural rubber, thermosetting polymers and select types of unprepared thermoplastic substrates such as ABS, polycarbonate and nylon.

Adcobond DCC-1 comprises extruded elastomeric patches with a butyl base. These patches are intended for insulating, sealing, and waterproofing automotive electrical wire harness joints and grommets. Adcobond® DCC-1 exhibits strong adhesion to a variety of surfaces, including polar materials like aluminum, glass, and steel, non-polar materials like polyethylene and vinyl, as well as automotive paint surfaces.

H.B. Fuller EH9650 is a fast-setting reactive hot melt adhesive and sealant. It is a 100% solid, one-component material that cures in the presence of moisture. The material is applied warm and sets immediately, allowing handling without the need for heat curing. H.B. Fuller EH9650 has optimum adhesion to a wide range of substrates, including glass, aluminum, stainless steel, plastic-coated wires, common engineered plastics (ABS, PET, PP, vinyl), and woven fabrics, without the need for primers.

H.B. Fuller FH6501 is a one-part epoxy adhesive specifically designed for potting and bonding electronic components. It is a heat-curable epoxy that offers excellent thermal conductivity. This product is commonly used in applications requiring thermally conductive properties, such as in electric motors.

H.B. Fuller EV Therm 288 is a silicone-free gap filler, formulated exclusively for EV battery environments. This thermal interface material cures at room temperature or is accelerated with heat and provides excellent thermal conductivity, electrical insulation, water resistance, corrosion resistance, and impact resistance properties.

H.B. Fuller FH8732B is a one-part epoxy adhesive that serves as a heat curable potting material. It offers good flow and is effective at filling gaps at room temperature. This epoxy is primarily used as an excellent heat cure encapsulant with low coefficient of thermal expansion (CTA) in electronics applications, specifically for electric motors.

H.B. Fuller EV Protect 1000 is a sprayable water-based intumescent coating designed to add a layer of protection in case of a thermal event in a battery pack. When exposed to flames, the coating will create an insulative layer that prevents direct contact of the flames to the substrate’s surface. This layer provides insulation against the flames and helps slow heat transfer through the coated substrate. H.B. Fuller EV Protect 1000 is formulated to adhere to a variety of common battery pack substrates, including steel, aluminum, e-coat, and ABS plastic. This coating can be easily applied onto battery pack components, and wet film builds of 0.030" can be applied without runs, drips, or sagging.

H.B. Fuller MP5401 is a one-component, heat-curable, thixotropic epoxy paste adhesive. It is a non-sag adhesive that forms strong bonds to metals and ceramics. H.B. Fuller MP5401 has exceptional thermal stability and resistance to water, humidity, and solvents. This product offers high heat resistance and cures in less than 36 seconds via induction or infrared heating. Its typical uses include permanent magnet motors and loudspeaker assembly, air conditioning joint tubes and processors, high-temperature structural bonding, filter end caps, and side seam assembly.

H.B. Fuller TS820 is a two-part, 1:1 mix ratio, toughened adhesive with less odor than most acrylic adhesives. TS820 Adhesive has excellent shear and peel strengths along with good impact resistance and durability. TS820 Adhesive quickly bonds most metals and ceramics with minimal surface preparation.

H.B. Fuller FH6522 is a one-part epoxy adhesive that is specifically designed for bonding magnets in electric motors. It offers good bonding strength and high strength, making it suitable for demanding applications. The adhesive cures when subjected to heat. It belongs to the epoxy and epoxy derivatives chemical family.

H.B. Fuller AC902 is a 2-step acrylic with an activator, requiring no mixing. It offers a very rapid cure and a long open time. This adhesive is used to achieve high bond strength in magnet bonding applications. It is commonly used in electric motors.

H.B. Fuller 2245 is an opaque, medium-viscosity, rubber-toughened ethyl cyanoacrylate adhesive. This product provides superior shock and thermal resistance when bonding rubbers, metals, and plastics in harsh environments. H.B. Fuller 2245 shows excellent strength and flexibility on a variety of substrates.

H.B. Fuller UV890SF-150D is a 1-part UV-curable conformal coating adhesive. It is a single-component adhesive with low viscosity and solvent-free properties. UV890SF can be applied using a brush, dip, or spray method. It is commonly used to protect printed circuit boards (PCBs) in various high-reliability applications, making it an ideal conformal coating material for electronic components, including electric motors.