H.B. Fuller logo

Thermonex® 090-05

1 of 14 products in this brand
Thermonex® 090-05 is a water-based, one-component adhesive known for its high heat resistance and low activation temperature. It is specifically designed for pre-application months prior to lamination. This adhesive offers the advantage of eliminating the need for onsite mixing of hardener, streamlining the factory floor process, and ensuring simplicity and consistency. Thermonex® 090-05 finds applications in press lamination and interiors.

Chemical Family: Isocyanates, Polyurethanes (PU)

Application Method: Roller, Spray

Compatible Substrates & Surfaces: Acrylonitrile Butadiene Styrene (ABS), Artificial Leather, Leather, Polycarbonate (PC), Polyvinyl Chloride (PVC) Film, Pre-treated Olefins, Textiles, Thermoplastic Polyolefin (TPO), Wood

Features: Good Bonding Strength, Heat Resistance, High Hydrolysis Resistance, Long Open Time

    Enhanced TDS

    Identification & Functionality

    Chemical Family
    Isocyanates,
    Polyurethanes (PU)
    RTU Product Type
    1K (1 component) Adhesive,
    Reactive Adhesive,
    Waterborne Adhesive
    Technologies
    Adhesives & Sealants
    Product Families
    Adhesives & Sealants — Bonding Technology
    1K Liquid Reactive Adhesives,
    Water-Based Adhesives

    Features & Benefits

    Labeling Claims
    Solvent-free
    Ready-to-Use Product Features
    Good Bonding Strength,
    Heat Resistance,
    High Hydrolysis Resistance,
    Long Open Time

    Applications & Uses

    Markets
    Automotive & Transportation
    Applications
    Automotive & Transportation — Automotive
    Interior
    Application Area
    Automotive Interior Trim
    Application Method
    Roller,
    Spray
    Compatible Substrates & Surfaces
    Acrylonitrile Butadiene Styrene (ABS),
    Artificial Leather,
    Leather,
    Polycarbonate (PC),
    Polyvinyl Chloride (PVC) Film,
    Pre-treated Olefins,
    Textiles,
    Thermoplastic Polyolefin (TPO),
    Wood

    Properties

    Physical Properties
    ValueUnitsTest Method / Conditions
    Solid Content47 - 50wt%Internal HBF Standard PSA 10
    Processing Parameters
    ValueUnitsTest Method / Conditions
    Storage Temperature50 - 90°F-
    Processing Temperature60 - 80°F-
    Viscosity10,000 - 15,000mPa·sInternal HBF Standard PSA 3.1
    Activation Temperaturemin. 160°F-

    Technical Details & Test Data

    Processing Information
    • Preparation
    • The surfaces to be bonded must be dry, clean, free of grease, free of dust, free of oil and minimum surface tension 40 mN/m to ensure a reliable bonding. To ensure a reliable bonding a minimum surface tension of 40 mN/m is required.
    • Processing
    • For the bonding of genuine leather, artificial leather and spacer fabrics a double side adhesive application on the laminate and on the carrier is necessary to achieve the maximum bonding performance. For foil applications a single side adhesive application on the carrier is sufficient. Equipment, containers, hoses, etc. which come into contact with Thermonex® 090- 05 must be of corrosion resistant material (i.e. stainless steel 1.4541 or 1.4571 or plastic) to avoid coagulation. Any contact with non-ferrous metals (like hoses, sealing rings, filter bodies, etc.) must be avoided in any case. The adhesive can be applied by spraying out of a pressure pot or with automated mixing systems. The use of HVLP spray guns minimizes overspray. Also roller coating is possible as an application system. For more details please contact our technical service team.
    • Drying
    • The recommended maximum drying temperature can be found in the technical data section. Drying with dry air (< 10 % rel. humidity) leads to a faster and very gentle drying process. During the drying process, the humidity in the drying channel increases strongly. The excessive moisture content must be reduced either by fresh air supply or by drying out physically. Caution: The drying time is influenced by the absorbency of the surface, drying temperature, coating weight, air humidity etc. and needs to be checked under real life conditions.

    Packaging & Availability

    Country Availability
    China (Mainland)
    Regional Availability
    • Asia Pacific
    • Europe
    • India/MiddleEast/Africa (IMEA)
    • Latin America
    • North America

    Storage & Handling

    Shelf Life
    6 months
    Storage Information
    • Thermonex® 090-05 should be used within the shelf life specified on the packaging.
    • The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature).