Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- Extremely resistant to both interior and exterior environmental conditions
- High bond strength
- Excellent adhesion to a variety of substrates
- Foamable using Nordson FoamMelt® equipment
- Resistant to environmental exposure
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Typical Applications
ADS-340 is typically used for sealing of fixed window modules, door water deflectors, and windshield reveal moldings. ADS-340 is designed to provide high bond strengths to a variety of substrates such as polyethylene, EVA, EPDM, and automotive paint systems.
- General Application Instructions
- ADS-340 can be processed with standard hot-melt pumping equipment at temperatures of 150°C to 175°C (300°F to 350°F).
- Recommended application temperatures for use with Nordson FoamMeltTM are 163°C to 185°C (325°F to 365°F).
Clean Up
If disassembly of ADS-340 is desired, the compound may be removed by grasping the compound and rapidly (in a snapping motion) pulling it from the substrate. Any residual traces of the adhesive may be removed with an aliphatic solvent such as mineral spirits followed by a wipe with a 50/50 alcohol/water solution.
Properties
- Color (Properties)
- Technical Data
Value Units Test Method / Conditions Specific Gravity 0.96 g/cm³ ASTM D71 Solids Content 99.9 % - Cone Penetration (Unfoamed Material, 300g Total Load) 125.0 dmm ASTM D217 Brookfield Thermosel Viscosity (at 350°F) 7000.0 cPs ASTM D2452 Cold Slam (at -29°C, 5 slams) Pass - GM9773P Peel Strength (40% foamed 5mm diameter bead) 10000.0 N/m GMN6309 Application Temperature Range 150 - 185 °C - Service Temperature Range -29 to 80 °C -
Regulatory & Compliance
- Regulatory Information
Meets requirements of:
- Chrysler - MS-CC-257 Type B
- GM - GMN6809
Packaging & Availability
- Packaging Type
- Packaging Information
ADS-340 Sealant is available in 55 gallon drums as a standard package.
Storage & Handling
- Shelf Life
- 12 months
- Storage and Shelf Life Conditions
Store material in original unopened packaging at temperatures Beteen 4°C to 43°C (40°F to 110°F). Shelf life is 12 months minimum when stored as recommended.