Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Cure Method
- Product End Uses
- Application Instructions
- Surface must be clean and dry before application. Remove all chemicals, dirt, wax and oil.
- Fold the Double/ Bubblepackage along the center seal, snip the end, squeeze out the contents, mix thoroughly and apply.
- Product Application
- Metals
- Carbon Steel
- Stainless Steel
- Aluminum
- Plastic
- Epoxy
- Other
- Stone
- Wood
- Glass
- China
- Leather
- Metals
Properties
- Physical Form
- Appearance
- Amber thick viscous liquid
- Physical Properties of Cured Material
Value Units Test Method / Conditions Peel Strength (at -40°C, of acid etched aluminum to aluminum, cure schedule - 24h at 25°C, t - peel) 1.5 pli - Peel Strength (at 25°C, of acid etched aluminum to aluminum, cure schedule - 24h at 25°C, t - peel) 1.8 pli - Lap Shear Strength (at 25°C for 30min, of acid etched aluminum to aluminum) 1000 psi - Lap Shear Strength (at 66°C, of acid etched aluminum to aluminum, cure schedule - 24h at 25°C) 1100 psi - Lap Shear Strength (at 25°C, 15min, of acid etched aluminum to aluminum) 150 psi - Lap Shear Strength (at 25°C for 60min, of acid etched aluminum to aluminum) 1500 psi - Lap Shear Strength (at -40°C, of acid etched aluminum to aluminum, cure schedule - 24h at 25°C) 1695 psi - Peel Strength (at 82°C, of acid etched aluminum to aluminum, cure schedule - 24h at 25°C, t - peel) 2.5 pli - Lap Shear Strength (at 38°C, of acid etched aluminum to aluminum, cure schedule - 24h at 25°C) 2400 psi - Lap Shear Strength (at 149°C, of acid etched aluminum to aluminum, cure schedule - 24h at 25°C) 245 psi - Lap Shear Strength (at 93°C, of acid etched aluminum to aluminum, cure schedule - 24h at 25°C) 300 psi - Lap Shear Strength (at 25°C, of acid etched aluminum to aluminum, cure schedule - 24h at 25°C) 3000 psi - Lap Shear Strength (at 82°C, of acid etched aluminum to aluminum, cure schedule - 24h at 25°C) 655 psi - - Component A
Value Units Test Method / Conditions Viscosity (at 25°C) 55000 cPs - Specific Gravity (at 25°C) 1.2 - - Flash Point 157 °C Pensky-Martens Closed Cup (PMCC) Density 10 lb/gal - - Typical Properties
Value Units Test Method / Conditions Specific Gravity (at 25°C) 1.16 - - Handling Time 15 - 30 minutes - Work Life 3 m - Viscosity (at 25°C) 40000 cPs - Density 9.7 lb/gal - Base Epoxy - - - Component B
Value Units Test Method / Conditions Viscosity (at 25°C) 10000 cPs - Specific Gravity (at 25°C) 1.13 - - Flash Point 132 °C Pensky-Martens Closed Cup (PMCC) Density 9.4 lb/gal - - Cured Properties
Value Units Test Method / Conditions Hardness (at 25°C) 80 Shore D Shore Durometer Scale Nominal Service Temperature (at 25°C) max. 82 °C -
Safety & Health
- Safety and Disposal Information
- These materials are intended for commercial and industrial use only, and the practices of good housekeeping, safety and cleanliness should be followed before, during and after use.
- Although the system contains low volatility materials, care should be taken in handling. Use adequate ventilation in the work area.
- These materials may cause dermatitis in susceptible individuals. Keep off skin and out of eyes. In case of accidental skin contact, wash thoroughly with soap and water. In case of eye contact, flush eyes thoroughly with water and consult a physician immediately.
Packaging & Availability
- Regional Availability
- Packaging Information
- The Double/ Bubble package is a handy, dual pouch, one shot, job size packaging concept. It reduces the waste typically associated with the use of larger quantities of two component adhesives. This unique packaging ensures that Double/ Bubble adhesives are always factory fresh and accurately portioned for optimum adhesive performance.
- Double/ Bubble Fast Setting Epoxy is also available in poly bottles, 1 gallon cans, 5 gallon pails and 55 gallon drums.
Storage & Handling
- Shelf Life
- 24 months
- Storage Information
- Store Double/ Bubble adhesives at room temperature in a dry environment. Extreme low temperatures may cause crystallization. Extreme high temperatures may degrade the properties.
- A wide variety of cleaning solutions are available for cured and uncured epoxies and polyurethanes.