Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Curing Conditions
Cure speed will vary with temperature, relative humidity, depth of material and presence of moisture. Some applications may require special surface preparation.
- General Instructions
- It is recommended that an automated dispensing unit be used to mix material. Use alcohol, mechanical polishing, or an organic solvent to clean the surface of the substrates. For best performance bond surfaces should be clean, dry and free of any contaminants and oils.
- Before use of material, test product adhesion to the substrate to ensure that the adhesive meets desired adhesion performance properties.This material is a moisture-cure type material. It will start to cure immediately after mixing two components.
- Moisture in the air will assist to cure material. It is recommended to schedule a timely purge for the use of mixed material in the static mixer. This is done to avoid inconsistent mixing and to ensure desired performance and properties.
Properties
- Color
- Physical Form
- Appearance
- Black
- Component A
- Component B
- Electrical Properties
- Cured Properties
- Damp Heat Aging Test Properties
- Uncured Properties
| Value | Units | Test Method / Conditions | |
| Viscosity | 7 - 14 | s/20g | Extrusion Rate, ASTM C603 |
| Value | Units | Test Method / Conditions | |
| Viscosity | 5 - 11 | s/20g | Extrusion Rate, ASTM C603 |
| Value | Units | Test Method / Conditions | |
| Volume Resistivity | 1.0 x 10¹⁵ | Ω.cm | IEC60093, GB/T1692 |
| Breakdown Voltage | 23.0 | kV/mm | IEC 60243-1, GB/T1695 |
| Value | Units | Test Method / Conditions | |
| Elongation at Break (21 - 25°C, 50% RH) | 210.0 | % | ISO37, GB/528 |
| Tensile Strength (at 21 - 25°C, 50% RH) | 2.4 | MPa | ISO37, GB/528 |
| Thermal Service Range | - 50 - 150 | °C | — |
| Hardness | 42.0 | — | ISO7619, GB/T531, Shore A |
| Lap Joint Shear Strength (at 21 - 25°C, 50% RH, Aluminum) | 1.3 | MPa | ISO4587, GB/T7124 |
| Value | Units | Test Method / Conditions | |
| Hardness | 30.0 | — | ISO7619, GB/T531, Shore A |
| Shear Strength (21 - 25°C, 50% RH) | 1.0 | MPa | ISO4587, GB/T7124 |
| Tensile Strength (at 21 - 25°C, 50% RH) | 1.7 | MPa | ISO37, GB/528 |
| Value | Units | Test Method / Conditions | |
| Fixture Time | max. 2 | h | — |
| Volume Mix Ratio | 10:1 | — | — |
| Working Time | 10.0 | min | — |
| Cure Schedule (50% RH) | 7.0 | days | — |
Packaging & Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 12 Months
- Storage Condition
Product shall be ideally store in a cool, dry area in unopened containers. Material should be stored at a temperature of 8 - 25°C.