Products

H.B. Fuller 2533W is a thermally conductive 2-part silicone gel that offers specific features and benefits. One notable advantage is its capability to provide thermal runaway and propagation protection for batteries. This is crucial for ensuring the safety and reliability of battery systems, particularly in applications such as electric vehicle (EV) encapsulation and protection. H.B. Fuller 2533W is specifically formulated to offer thermal management and protection properties in demanding battery applications.

Tonsan® 1533 White is a two-component adhesive that can cure quickly at room temperature, providing excellent sealing and bonding. This material is recommended for potting electronic components, particularly junction boxes on PV modules. It has excellent dielectric properties and V1 flame retardancy.

H.B. Fuller PHOTOCAP® 3650 is an ultrafast-curing, PID-resistant thermoset polyolefin encapsulant with enhanced UV protection to ensure backsheet longevity. It has a low MVTR (moisture vapor transmission rate), a short lamination cycle, and excellent light transmission with no acetic acid concerns.

Tonsan® 3220 is a one-component anaerobic adhesive with high strength and good cold water resistance. It is mainly used to bond silicon rods and polyester sheets. This material is recommended for use in the silicon cutting process by a diamond wire saw to temporarily fix the silicone rod and polyester sheet.

H.B. Fuller 1581 is a one-component, alcohol-cured RTV silicone sealant. A non-sag material with excellent heat resistance for use in industrial and electronics applications. 1581 has very good adhesion to a wide range of unprimed substrates. High performance with fast and excellent adhesion to glass, aluminum alloys, etc. It can be used for a variety of electronics bonding, encapsulation, and sealing applications. This material is certified by UL to pass HB flame rating testing. This material performs at temperatures ranging from -55°C to 210°C.

H.B. Fuller 1527B is a black, medium-viscosity, low-odor, good workability RTV silicone. Cures at room temperature when exposed to moisture. Excellent flexibility, adhesive property, electrical insulation, weather resistance, aging resistance, and thermal cycle resistance 1527B passes FDA 21 CFR 177.2600 and is UL-certified.

TICTAK® 621 is a double-sided PE-foam tape consisting of a highly conformable closed cell PE foam backing and a high-quality acrylic adhesive. It is designed for frame mounting and is resistant to aging, UV, weathering, water, and salt according to solar requirements.

Tonsan® 1527 Black is a high-quality, one-component sealant based on silicone polymer. It cures by a chemical reaction with moisture to an elastic product. This material is recommended for sealing the side frames of solar cells and for sealing the solar energy lamps. cell, sealing or adhering the junction boxes of solar,

H.B. Fuller 1527, also called 1527SBK, is a black, UL-certified, one-component RTV silicone with super resistance to weathering and ultra violet (UV). This material has very good adhesion without the need for primers to a wide range of substrates. It can be used for a variety of interior and exterior bonding and sealing applications. 1527 Black is formulated to perform at temperatures ranging from -54°C to 210°C.

H.B. Fuller 3211 is a one-component adhesive that offers several features and benefits. It is easy to use and cures quickly, facilitating efficient bonding processes. One of its notable advantages is its ease of removal in boiling water or hot water, providing flexibility and convenience in temporary bonding applications. H.B. Fuller 3211 is specifically used for the temporary bonding of glass/resin and substrate, as well as the temporary bonding of ingots and glass/resin. It is commonly applied in the diamond wire cutting process for ingot bonding applications.

Tonsan® 1521 White is a two-component adhesive that can cure quickly at room temperature, providing excellent sealing and bonding. This material is recommended for potting electronic components, particularly junction boxes on PV modules. It has good thermal conductivity and flame retardancy.

H.B. Fuller PHOTOCAP® 6048 is a thermoplastic, non-EVA-based encapsulating film designed for use in thin film modules.  It has a low MVTR (moisture vapor transmission rate), a short lamination cycle, and good creep resistance with proven longevity in the field.

H.B. Fuller 1527 White, also called 1527SWT, is a white, UL-certified, one-component RTV silicone with super resistance to weathering and ultra violet (UV). This material has very good adhesion without the need for primers to a wide range of substrates. It can be used for a variety of interior and exterior bonding and sealing applications. 1527 White is formulated to perform at temperatures ranging from -54°C to 210°C.

Tonsan® 1522 White is a two-component adhesive that can cure quickly at room temperature, providing high bond strength. This material is specifically recommended for use with metals, plastics, and glass, and is particularly suitable for sealing and bonding PV modules.

Tonsan® 1581 White is one component material that is unaffected by moisture in the air. This material is recommended for sealing the side frames of solar cells and sealing the solar energy lamps. alkoxy-cure silicone adhesive cures at room temperature when exposed cells are sealed or adhered to the junction boxes of solar cells.